Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

New Panel Design

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

lykowdk

Joined: 28 Jul 2008
Posts: 8

Posted: Mon Jul 28, 2008 9:33 pm Post subject: New Panel Design

So, I spent some time laying out a new panel for my 601..  

Any thoughts? 



Dan Lykowski

Dynon Avionics

DSCF0512_c.JPG

Description:

Filesize:

137.53 KB

Viewed:

719 Time(s)

lykowdk

Joined: 28 Jul 2008
Posts: 8

Posted: Mon Jul 28, 2008 9:54 pm Post subject: Re: New Panel Design

Ok.. So its a selfless plug.. I have been itching to show these off for months..



More info at www.dynonavionics.com



Dan Lykowski

Dynon Avionics

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Tue Jul 29, 2008 5:32 am Post subject: Re: New Panel Design

I hate you guys. You are releasing those just far enough in the future that they aren't an option for me.



Guess I'll just have to live with the 180. Poor, poor pitiful me.



 	  lykowdk wrote: 	
		  Ok.. So its a selfless plug.. I have been itching to show these off for months..



More info at www.dynonavionics.com



Dan Lykowski

Dynon Avionics

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

john.marzulli(at)gmail.co
Guest

Posted: Tue Jul 29, 2008 12:10 pm Post subject: New Panel Design

If it were me...



I would move the Dynons ( why not a Grand Rapids  ) further towards the center so you have more edge room on the panels.



Looks good though.



DO NOT ARCHIVE!

 John Marzulli



http://701Builder.blogspot.com/

http://www.GenevieveMarzulli.org/

http://www.JohnMarzulli.net/

  



On Mon, Jul 28, 2008 at 10:33 PM, lykowdk <engineerguy3737(at)yahoo.com (engineerguy3737(at)yahoo.com)> wrote:

[quote] --> Zenith-List message posted by: "lykowdk" <engineerguy3737(at)yahoo.com (engineerguy3737(at)yahoo.com)>

 

 So, I spent some time laying out a new panel for my 601..  [Shocked]

 Any thoughts? 

 

 Dan Lykowski

 Dynon Avionics

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=195499#195499

 

 

 

 

 Attachments:

 

 http://forums.matronics.com//files/dscf0512_c_170.jpg

 

 

 

 

 

 

 

 [b]

lykowdk

Joined: 28 Jul 2008
Posts: 8

Posted: Tue Jul 29, 2008 1:23 pm Post subject: New Panel Design

Thanks for the suggestion.. Actually a couple people have suggested I move them further in.. LOL.. I honestly just randomly taped them to the panel to show them off. Depending on how things work out, I may start with the 7's and upgrade to a pair of 10's eventually once we release our Com radio and transponder. ( I won't need the panel space for radios )

Why not Grand Rapids? LOL.. Because Dynons are the Best! and the price is right.  

Just in case anyone out there was wondering how my fuselage just seemed to have appeared.. I was the person who bought the $1500 deal in Lynnwood, WA about a week ago. It was right down the road from me, and the workmanship was excellent. It was just a little more complete than a Quickbuild.

Dan Lykowski

Dynon Avionics Software Engineer

601XL

--- On Tue, 7/29/08, John Marzulli <john.marzulli(at)gmail.com> wrote:

 	  Quote: 	
		   From: John Marzulli <john.marzulli(at)gmail.com>

 Subject: Re: New Panel Design

 To: zenith-list(at)matronics.com

 Date: Tuesday, July 29, 2008, 4:07 PM

 If it were me...

 I would move the Dynons ( why not a Grand Rapids  )

 further towards the

 center so you have more edge room on the panels.

 Looks good though.

 DO NOT ARCHIVE!

 John Marzulli

 http://701Builder.blogspot.com/

 http://www.GenevieveMarzulli.org/

 http://www.JohnMarzulli.net/

 On Mon, Jul 28, 2008 at 10:33 PM, lykowdk

 <engineerguy3737(at)yahoo.com> wrote:

 > 

 "lykowdk" <engineerguy3737(at)yahoo.com>

 >

 > So, I spent some time laying out a new panel for my

 601..  [Shocked]

 > Any thoughts? 

 >

 > Dan Lykowski

 > Dynon Avionics

 >

 >

 >

 >

 > Read this topic online here:

 >

 >

 http://forums.matronics.com/viewtopic.php?p=195499#195499

 >

 >

 >

 >

 > Attachments:

 >

 > http://forums.matronics.com//files/dscf0512_c_170.jpg

 >

 >

 >

 >

 >

 >

 >

 >

craig(at)craigandjean.com
Guest

Posted: Tue Jul 29, 2008 6:55 pm Post subject: New Panel Design

 	  Quote: 	
		   Ok.. So its a selfless plug.. I have been itching to show these off 

 for months..


	


Congratulations on your new baby.



But why don't you design in an MGL Odyssey (shipping since the 

beginning of the year) or Voyager - then you wouldn't have to wait 

until 2009 for a large screen EFIS 



There were working Voyagers from the first production run in the MGL 

and SteinAir booths (next to the Dynon demo).



Just kidding - I'm sure the new Dynons will be as useful and popular as 

the current products.



-- Craig

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Wed Jul 30, 2008 5:15 am Post subject: Re: New Panel Design

Craig, John, I am laughing so hard right now.



Dan works for Dynon.

 	  Quote: 	
		  

Dan Lykowski 

Dynon Avionics

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

craig(at)craigandjean.com
Guest

Posted: Wed Jul 30, 2008 5:43 am Post subject: New Panel Design

 	  Quote: 	
		   Dan works for Dynon.


	


And you are thinking I don't know that? 



-- Craig



Do not archive

mackay(at)physics.ubc.ca
Guest

Posted: Wed Jul 30, 2008 7:13 am Post subject: New Panel Design

Hi Dan



Your panel design is very interesting! I noticed that you have two 

rectangular instruments in the middle; were these meant to be the comm 

radio and the transponder? I thought that the new Dynon unit could be 

purchased with these included.



Will it be possible to operate the new unit with the D120 in something 

like the current D120/D100 combination? i.e. sharing screens?



Best regards

Alex MacKay



601HDS, Jab 3300, starting engine installation



On Mon, 28 Jul 2008, lykowdk wrote:



 	  Quote: 	
		   



 So, I spent some time laying out a new panel for my 601..  [Shocked]

 Any thoughts? 



 Dan Lykowski

 Dynon Avionics





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=195499#195499





 Attachments:



 http://forums.matronics.com//files/dscf0512_c_170.jpg

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Wed Jul 30, 2008 7:50 am Post subject: Re: New Panel Design

Give me a break. It was early and my sarcasm detector hadn't booted up yet. 

[quote="craig(at)craigandjean.com"] 	  Quote: 	
		   Dan works for Dynon.

And you are thinking I don't know that? 



-- Craig



Do not archive

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

annken100

Joined: 15 Nov 2007
Posts: 62

Posted: Thu Jul 31, 2008 5:37 am Post subject: Re: New Panel Design

Dan,



The next gen dynon units are most impressive.  I stop by the dynon booth here at OSH daily to gawk at them.  Of course, you guys suck because I have already purchased my dynon gear already!!  In comparison to the next gen stuff my panel all of a sudden looks archaic.  I've included a picture below.  It looks like a major avionics upgrade is in my plane's future and its not even finished yet!!



Ken Pavlou



601XL / Corvair

IMG_0274.jpg

Description:

Filesize:

126.74 KB

Viewed:

616 Time(s)

_________________
601 XL / Corvair

amyvega2005(at)earthlink.
Guest

Posted: Thu Jul 31, 2008 7:07 am Post subject: New Panel Design

Bout the nicest panel I have seen so far!



Juan



--

maarten versteeg

Joined: 15 May 2007
Posts: 37
Location: San Antonio

Posted: Fri Aug 01, 2008 8:51 am Post subject: New Panel Design

Hello Ken,



Sure you can always find fancier panels, but your panel would

be a huge improvement over the panels I find in the 30 year

old planes I regularly rent. The more advanced Dynon panels

might even invite to flight into riskier environments beyond

the basic VFR. But it certainly is nice that they combined the

navigation (map) display in their system, but you loose the

redundancy of map and EFIS.

When I looked at your panel picture I was actually surprised,

I am only just about to start the fuselage and here suddenly

was my current draft panel concept already in real life. Do

you have higher resolution pictures that you would be willing

to share (or email me personally). Two other questions, what

radio did you decide upon and is the hole on the right of

the Dynon for the announced autopilot control panel?



Regards,

	Maarten,

          plans building 601xl,

          about to finish the 2nd wing

 	  Quote: 	
		   

 Dan,

 

 The next gen dynon units are most impressive.  I stop by the dynon booth here at

 OSH daily to gawk at them.  Of course, you guys suck because I have already

 purchased my dynon gear already!!  In comparison to the next gen stuff my panel

 all of a sudden looks archaic.  I've included a picture below.  It looks like

 a major avionics upgrade is in my plane's future and its not even finished yet!!

 

 Ken Pavlou

 

 601XL / Corvair

_________________
Maarten Versteeg
601XL scratch building wings

annken100

Joined: 15 Nov 2007
Posts: 62

Posted: Sat Aug 02, 2008 4:20 pm Post subject: Re: New Panel Design

Hi Maarten,



I'd be happy to send you pictures of my panel, however I am in OSH as I type this.  When I get home I'll send you some more pics.



I went with the Garmin SL30 for Nav/Com and a Garmin GTX327 for the transponder.  My GPS is an Avmap EKP IV.  The hole in the panel is for the Dynon AP76 autopilot module.  The Dynon equipment in the picture is an HS34, Flightdeck D180, and EFIS D100.



Regards,



Ken Pavlou

601 XL / Corvair

_________________
601 XL / Corvair

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum