Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Exhaust Questions

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

Mozam

Joined: 24 Nov 2006
Posts: 85

Posted: Sat Aug 02, 2008 5:18 pm Post subject: Exhaust Questions

The section of exhaust with the heat shroud for cockpit heat (cylinder #eight) has gone Tango Uniform.  The inner (main) pipe appears to be too thin and burned thru...resulting in lots of exhaust and CO in the cockpit.  NOT good!



The shroud has been cut off and the pipe cobbled together with many welds, that are failing on a daily basis due to the thinness of the pipe.  And I have no cockpit heat, which I will need this winter.



So...my questions are:  



1.)  Is it possible to buy just this section with the heat shroud, or am I forced to buy an entire new exhaust system?



2.)  If I have to buy a whole system, does anyone have any experience with/and recommend the "slip-joint" system vs. the stock system?



Thanks,

Steve Dalton

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

viperdoc(at)mindspring.co
Guest

Posted: Sat Aug 02, 2008 7:06 pm Post subject: Exhaust Questions

Mozam,

Talk to Steve Culp. He sold me the #2 section on the left bank for my YAK a

year ago. He has the complete right side still the last time I talked to

him.

Doc



--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

david(at)mcgirt.net
Guest

Posted: Sun Aug 03, 2008 3:55 pm Post subject: Exhaust Questions

Might try Kimball



http://www.jimkimballenterprises.com/web/m14p.php





On 8/2/08 9:18 PM, "Steve Dalton" <sdalton(at)hughes.net> wrote:



 	  Quote: 	
		   

 

 The section of exhaust with the heat shroud for cockpit heat (cylinder # has

 gone Tango Uniform.  The inner (main) pipe appears to be too thin and burned

 thru...resulting in lots of exhaust and CO in the cockpit.  NOT good!

 

 The shroud has been cut off and the pipe cobbled together with many welds,

 that are failing on a daily basis due to the thinness of the pipe.  And I have

 no cockpit heat, which I will need this winter.

 

 So...my questions are:

 

 1.)  Is it possible to buy just this section with the heat shroud, or am I

 forced to buy an entire new exhaust system?

 

 2.)  If I have to buy a whole system, does anyone have any experience with/and

 recommend the "slip-joint" system vs. the stock system?

 

 Thanks,

 Steve Dalton

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=196222#196222

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

randmyak52(at)bellsouth.n
Guest

Posted: Sun Aug 03, 2008 6:19 pm Post subject: Exhaust Questions

Hey Guys, perhaps we should all remove and check  for failure of the heat 

exchange system on our Yaks, could have failed without our knowing. We all 

know that stuff is colorless and oderless!!!!!!!!!!!!!!. Steve, could you 

provide some pics of your system?

---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum