Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Brake Linings
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

coop85(at)cableone.net
Guest

Posted: Sun Aug 24, 2008 11:54 am Post subject: Brake Linings

It's time to replace the brakes and my research has found Tim's notes of

requiring Cleveland part# 66-112.  However, Vans has a brake kit with 4

linings and the rivets for $33.  I'm guessing those aren't Cleveland parts

so I was wondering if anyone knew of RAPCO now had a matching part?  I'll

happily order the parts from Vans, however I'm a lot closer to AS&S and I'd

like to save on the shipping since I have to order the brake tool from them

anyway.



Thanks,

Marcus



Do not archive

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Sun Aug 24, 2008 1:32 pm Post subject: Brake Linings

AS&S shows Cleveland version for 15.60 a pair, under Beech Skipper. So

tax vs shipping would be the tie brake.



On Sun, Aug 24, 2008 at 12:53 PM, Marcus Cooper <coop85(at)cableone.net> wrote:

 	  Quote: 	
		   



 It's time to replace the brakes and my research has found Tim's notes of

 requiring Cleveland part# 66-112.  However, Vans has a brake kit with 4

 linings and the rivets for $33.  I'm guessing those aren't Cleveland parts

 so I was wondering if anyone knew of RAPCO now had a matching part?  I'll

 happily order the parts from Vans, however I'm a lot closer to AS&S and I'd

 like to save on the shipping since I have to order the brake tool from them

 anyway.



 Thanks,

 Marcus



 Do not archive

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

dlm46007(at)cox.net
Guest

Posted: Sun Aug 24, 2008 1:32 pm Post subject: Brake Linings

I believe you will find that the Rapco brake linings use same numbering

system as Cleveland but have RA as a prefix. 



--

dlm46007(at)cox.net
Guest

Posted: Sun Aug 24, 2008 1:34 pm Post subject: Brake Linings

You might order the brake rivet set and use your hand squeeze on them. 



--

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Sun Aug 24, 2008 1:49 pm Post subject: Brake Linings

Unfortunately, Rapco doesn't supply equivalents for every variety brake pad.



On Sun, Aug 24, 2008 at 2:31 PM, David McNeill <dlm46007(at)cox.net> wrote:

[quote] 



 I believe you will find that the Rapco brake linings use same numbering

 system as Cleveland but have RA as a prefix.



 --

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

wcurtis(at)nerv10.com
Guest

Posted: Sun Aug 24, 2008 1:58 pm Post subject: Brake Linings

I looked at these and though it was about time that someone came out with something like this, but then the price makes no sense.  $37 for brake rivet set only when the old complete "hammer" version is only $23.  The brake rivet set should be no more than $10.  For example this 5 piece rivet set is only $18.95: http://www.aircraftspruce.com/catalog/topages/rivset4sqzr.php

It may be better to just grind down a set of an old rivet set.



http://www.aircraftspruce.com/catalog/topages/brakerivset.php



William

http://nerv10.com/wcurtis/ 



------

coop85(at)cableone.net
Guest

Posted: Sun Aug 24, 2008 2:06 pm Post subject: Brake Linings

Thanks, good catch on the part number but I read it as price per lining so with the new price of $16.95 that would be double Vans price.  I have a question in to AS&S so we'll see.  If anyone has confidence that the price is per pair please let me know and I'll hit send on the order.  My concern is because there are several airplanes mentioned that need 1 versus 2 of the same part number but the price is the same leading me to believe price is per lining.



Thanks,

Marcus



--

coop85(at)cableone.net
Guest

Posted: Sun Aug 24, 2008 2:07 pm Post subject: Brake Linings

Great call, now why didn't I think of that?!



--

coop85(at)cableone.net
Guest

Posted: Sun Aug 24, 2008 2:20 pm Post subject: Brake Linings

I found Rapco's full catalog on the AS&S sight and you're correct, RA66-112

for the Skipper.  Unfortunately AS&S site doesn't have them available.  I'll

keep looking though.



Marcus



--

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Sun Aug 24, 2008 3:06 pm Post subject: Brake Linings

Cleaveland is the ONLY place making them at this point, so

all linings of that part number are the ones you need.

Rapco is thinking about it, but hasn't.



Tim Olson - RV-10 N104CD - Flying

do not archive

Marcus Cooper wrote:

 	  Quote: 	
		   

 

 It's time to replace the brakes and my research has found Tim's notes of

 requiring Cleveland part# 66-112.  However, Vans has a brake kit with 4

 linings and the rivets for $33.  I'm guessing those aren't Cleveland parts

 so I was wondering if anyone knew of RAPCO now had a matching part?  I'll

 happily order the parts from Vans, however I'm a lot closer to AS&S and I'd

 like to save on the shipping since I have to order the brake tool from them

 anyway.

 

 Thanks,

 Marcus

 

 Do not archive

dlm46007(at)cox.net
Guest

Posted: Sun Aug 24, 2008 4:11 pm Post subject: Brake Linings

I bought Cleveland replacements at Air suppliers out of Texas. Better price

than AS&S IIRC. 



--

dlm46007(at)cox.net
Guest

Posted: Sun Aug 24, 2008 4:15 pm Post subject: Brake Linings

You can figure about $15 per lining no matter which supplier you buy for

aircraft; it goes on certified aircraft. 



--

dlm46007(at)cox.net
Guest

Posted: Sun Aug 24, 2008 4:18 pm Post subject: Brake Linings

Check http://www.airsuppliers.com/shop/search.asp for 66-11200. 



--

tintopranch

Joined: 29 Jun 2007
Posts: 12

Posted: Mon Aug 25, 2008 11:30 am Post subject: Re: Brake Linings

AircraftSpruce price is for each lining and you will need 4 at $16, I just purchased them...will purchase from Van's in the future, I just needed them faster than Van's could ship.

_________________
MARK SUTHERLAND
RV-10 40292
Flying since June 07

coop85(at)cableone.net
Guest

Posted: Mon Aug 25, 2008 2:53 pm Post subject: Brake Linings

Yep, I got the e-mail from AS&S and the price is per each lining, $16.95 x 4

- ouch, Van's is getting the order for sure.  Rapco has the right part

number in their catalog so they appear to make them, hopefully AS&S will

start carrying them soon but right now they are still showing unavailable.



Marcus



--

dlm46007(at)cox.net
Guest

Posted: Mon Aug 25, 2008 3:12 pm Post subject: Brake Linings

If you are looking for a deal, I ordered 8 pads and 20 rivets from air

suppliers in Texas. Each Cleveland pad was $13.08 and rivets were $.16 each.

Fedex ground was $12.61. total $122.05. Because it is a part that goes on

certified aircraft you have the FAA/PMA premium.  



--

dlm46007(at)cox.net
Guest

Posted: Mon Aug 25, 2008 3:16 pm Post subject: Brake Linings

I am told that Vans sells the Grove brand and a set of four linings is $33. 



--

dlm46007(at)cox.net
Guest

Posted: Mon Aug 25, 2008 3:32 pm Post subject: Brake Linings

I just called Vans and confirmed that they do not sell Grove for the 10 but

do sell Cleveland 66-11200 , a set of 4 for $33. I ordered two sets. That is

a deal.



--

jcumins(at)jcis.net
Guest

Posted: Mon Aug 25, 2008 3:34 pm Post subject: Brake Linings

Sacramento Skyranch has 66-11200 for $16.64  and they do carry the

RA66-11200 but do nut publish there price on line.  



There a great place to get parts and reasonable too.



John G. Cumins

President

 

JC'S Interactive Systems

2499 B1 Martin Rd

Fairfield Ca 94533

707-425-7100

707-425-7576 Fax

 

Your Total Technology Solution Provider



--

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Mon Aug 25, 2008 6:16 pm Post subject: Brake Linings

I will do my best to NOT shop at Sacto SkyRanch ever again.   Went in there to buy some West System Epoxy Resin and was told they don't stock stuff for them Experimental planes!   See ya!

 Don McDonald

 #40636

 SB done today



--- On Mon, 8/25/08, John Cumins <jcumins(at)jcis.net> wrote:



 [quote]From: John Cumins <jcumins(at)jcis.net>

Subject: RE: Brake Linings

To: rv10-list(at)matronics.com

Date: Monday, August 25, 2008, 4:31 PM



[quote]--> RV10-List message posted by: "John Cumins" <jcumins(at)jcis.net>  Sacramento Skyranch has 66-11200 for $16.64  and they do carry the RA66-11200 but do nut publish there price on line.    There a great place to get parts and reasonable too.    John G. Cumins President   JC'S Interactive Systems 2499 B1 Martin Rd Fairfield Ca 94533 707-425-7100 707-425-7576 Fax   Your Total Technology Solution Provider  --

_________________
Don A. McDonald
40636

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum