Matronics Email Lists :: View topic - Kitfox 4 flaperon rigging

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Kitfox 4 flaperon rigging

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

thesupe(at)hotmail.com
Guest

Posted: Fri Sep 19, 2008 8:36 pm Post subject: Kitfox 4 flaperon rigging

Hi all C well I've been trying to get my flaperons adjusted on the plane C and can't find the procedure in my manual.  I did a search on the archives and that wasn't much help either.  I even have the article by Mark Budak in the Kitfox Skystar Journal 'All about flaperon rigging and new tailwheel springs' and that isn't much help either.  None of what I've read walks you through the process from start to finish.  Can anyone help?  All of the controls were in when I got the plane C but they are not set correctly.  Thanks C  Jim Chuk  Kitfox 4 b;         - The K; _nbsp;                           -Matt Dw.matronics.com/contribution" target=_blank>http://www.matronics.com/cont================



See how Windows Mobile brings your life together—at home C work C oirect/01/' target='_new'>See Now

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Kitfox_4_build_pics_038.jpg

Description:

Filesize:

278.1 KB

Viewed:

380 Time(s)

MDKitfox(at)aol.com
Guest

Posted: Fri Sep 19, 2008 8:54 pm Post subject: Kitfox 4 flaperon rigging

Jim,



I have the flaperon rigging procedures for a model V if that will help.  They're at my hangar and I can email them tomorrow if that helps.  Let me know if you're interested.

Rick Weiss

Series V Speedster, 912S Power, SkyStar S/N 1

MDKitfox(at)aol.com (MDKitfox(at)aol.com)





On Sep 20, 2008, at 12:35 AM, Jim_and_Lucy Chuk wrote:

 	  Quote: 	
		  Hi all, well I've been trying to get my flaperons adjusted on the plane, and can't find the procedure in my manual.  I did a search on the archives and that wasn't much help either.  I even have the article by Mark Budak in the Kitfox Skystar Journal 'All about flaperon rigging and new tailwheel springs' and that isn't much help either.  None of what I've read walks you through the process from start to finish.  Can anyone help?  All of the controls were in when I got the plane, but they are not set correctly.  Thanks,  Jim Chuk  Kitfox 4 b;         - The K; 

_nbsp;                           -Matt Dw.matronics.com/contribution" target=_blank>http://www.matronics.com/cont================



[url=http://www.matronics.com/Navigator?Kitfox-List][/url]

See how Windows Mobile brings your life together—at home, work, oirect/01/' target='_new'>See Now = <Kitfox 4 build pics 038.jpg>

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Tom Jones

Joined: 12 Mar 2006
Posts: 752
Location: Ellensburg, WA

Posted: Sat Sep 20, 2008 4:35 pm Post subject: Re: Kitfox 4 flaperon rigging

Jim, the flaperon rigging instructions in the manual are in the wing section, pages W-E-1 through W-E-8.  Did you find them?

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Tom Jones
Classic IV
503 Rotax, 72 inch Two blade Warp
Ellensburg, WA

akflyer

Joined: 07 May 2007
Posts: 574
Location: Soldotna AK

Posted: Sat Sep 20, 2008 4:46 pm Post subject: Re: Kitfox 4 flaperon rigging

I just rigged a set on a model I and had troubles chasing it from one flaperon to the other... I ended up clamping a piece of aluminum angle to the flaperon just outboard of the strut attach point, then taped a paint stir stick to under the leading edge (it was the perfect width for what the book called out.  With BOTH flaperons set for level it was a simple task to adjust the two linkage rods on the mixer with the mixer leveled, then center the stick with the heim joint.  Took me about 10 minutes to have it all buttoned up after I immobilized both flaperons at 0 degrees.

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
DO NOT ARCHIVE
Leonard Perry aka SNAKE
Soldotna AK
Avid "C" / Mk IV
582 (147 hrs and counting on the rebuild)
IVO IFA
Full Lotus 1450
#1 snake oil salesman since 1-22-2009

I would rather die trying to live, than to live trying not to die....

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum