 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
AirMike
Joined: 27 Feb 2007
Posts: 514
Location: Nevada
|
 Posted: Sat Oct 25, 2008 12:17 pm Post subject: Elevating the fuse to put it up on it's gear |
 |
|
How high must the fuselage be elevated to put the gear on?
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
See you OSH '18
Q/B - sold. |
|
| Back to top |
|
 |
planesmith(at)hotmail.com
Guest
|
| Posted: Sun Oct 26, 2008 8:20 pm Post subject: Elevating the fuse to put it up on it's gear |
|
|
Just went through this two weeks ago. I didn't measure it at the time but in measuring it now C the center section between the two main gear needs to be about 30 to 32" above the ground.
Vern Smith (#324 finishing?)
do not archive
[quote] Subject: Elevating the fuse to put it up on it's gear
From: Mikeabel(at)Pacbell.net
Date: Sat C 25 Oct 2008 13:17:07 -0700
To: rv10-list(at)matronics.com
--> RV10-List message posted by: "AirMike" <Mikeabel(at)Pacbell.net>
How high must the fuselage be elevated to put the gear on?
--------
OSH '08 or Bust (busted) be there in "09
Q/B Kit - wiring and FWF
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=210262#210262
=======
Want to read Hotmail messages in Outlook? The Wordsmiths show you how. Learn Now
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
orchidman
Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE
|
| Posted: Mon Oct 27, 2008 3:52 am Post subject: Re: Elevating the fuse to put it up on it's gear |
|
|
| planesmith(at)hotmail.com wrote: | Just went through this two weeks ago. I didn't measure it at the time but in measuring it now C the? center section between the two main gear needs to be about 30 to 32" above the ground.
Vern Smith (#324 finishing?)
do not archive?
|
Vern,
How did you support the fuselage while you were installing the 2 main gear. Right now, I am supporting the center section at the wing mounting bolt holes with a 2x4 both in front and aft of the mount point. It looks like the aft board will be in the way.
Gary
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying) |
|
| Back to top |
|
|
planesmith(at)hotmail.com
Guest
|
| Posted: Mon Oct 27, 2008 7:44 am Post subject: Elevating the fuse to put it up on it's gear |
|
|
Hi Gary C
I have some large dense foam blocks and placed them directly under the center section carry through spar. This allowed the weigh to be distributed over the the full width of the center section spar and structure.
Vern
do not archive
> Subject: Re: Elevating the fuse to put it up on it's gear
| Quote: | From: gary(at)wingscc.com
Date: Mon C 27 Oct 2008 04:52:03 -0700
To: rv10-list(at)matronics.com
--> RV10-List message posted by: "orchidman" <gary(at)wingscc.com>
planesmith(at)hotmail.com wrote:
> Just went through this two weeks ago. I didn't measure it at the time but in measuring it now C the? center section between the two main gear needs to be about 30 to 32" above the ground.
>
> Vern Smith (#324 finishing?)
> do not archive?
>
Vern C
How did you support the fuselage while you were installing the 2 main gear. Right now C I am supporting the center section at the wing mounting bolt holes with a 2x4 both in front and aft of the mount point. It looks like the aft board will be in the way.
Gary
--------
Gary Blankenbiller
RV10 - # 40674
Instrument Panel C Fiberglass - SB
(N2GB registered)
|
Stay organized with simple drag and drop from Windows Live Hotmail. Try it [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
