Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

D100 compass
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

naumuk(at)alltel.net
Guest

Posted: Sat Nov 01, 2008 5:56 am Post subject: D100 compass

All-

     For those of you who have a  flying Dynon D-100 EFIS w/remote compass, roughly where did you mount the remote  compass module?

     Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair  95%

   [quote][b]

gfmjr_20(at)HOTMAIL.COM
Guest

Posted: Sat Nov 01, 2008 12:25 pm Post subject: D100 compass

Bill--

  I made a small bracket for mine and mounted it on the floor behind the passenger seat. Been working fine for 240 hours. 



George May

601XL 912s



From: naumuk(at)alltel.net

To: zenith-list(at)matronics.com

Subject: D100 compass

Date: Sat C 1 Nov 2008 09:55:20 -0400



          All-

     For those of you who have a  flying Dynon D-100 EFIS w/remote compass C roughly where did you mount the remote  compass module?

     Thanks.

 Bill Naumuk

Townville C Pa.

HDS 601MG/Corvair  95%

    	  Quote: 	
		  



ww.matronics.com/contribution

 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List

onics.com
	


	
Stay up to date on your PC C the Web C and ymsnnkwxp1020093185mrt/direct/01/' target='_new'>See Now  [quote][b]

tshankland(at)sbcglobal.n
Guest

Posted: Sat Nov 01, 2008 1:33 pm Post subject: D100 compass

I put mine in the back of the baggage compartment. This way it its easy to get to and I have the temperature sensor connected to the outside. One item you need to keep in mine if you actually put baggage in there make sure nothing with a strong magnet, like an electric razor ends up on your remote compass.

 Tim Shankland

 

 Bill Naumuk wrote: [quote]            All-

       For those of you who have a flying Dynon D-100 EFIS w/remote compass, roughly where did you mount the remote compass module?

       Thanks.

   Bill Naumuk

 Townville, Pa.

 HDS 601MG/Corvair 95%

    	  Quote: 	
		  



	
 [b]

naumuk(at)alltel.net
Guest

Posted: Sat Nov 01, 2008 3:33 pm Post subject: D100 compass

George-

     With the battery and ELT on a shelf on  the passenger side, I don't have any more room. However, I'm sure a shelf on the  pilot side would work just as well.

      Thanks.

                                                Bill

 [quote]   ---

naumuk(at)alltel.net
Guest

Posted: Sat Nov 01, 2008 3:38 pm Post subject: D100 compass

Tim-

     Aft of the seats somewhere seems  to be the place of choice.

     Thanks.

                                                                     Bill

 [quote]   ---

arno7452(at)bellsouth.net
Guest

Posted: Sat Nov 01, 2008 4:22 pm Post subject: D100 compass

Mine is also mounted on the back wall of the  baggage area.  Easy to access and sync the relative angle between the  remote and the D-100.

 Ken

 CH701 912ULS N701LK

  

  

  

 [quote]   ---

naumuk(at)alltel.net
Guest

Posted: Sat Nov 01, 2008 4:57 pm Post subject: D100 compass

Thanks, Ken. 

 As said before, behind the seats seems to be the  place.

                                                                 Bill

 [quote]   ---

sanyu(at)wanadoo.fr
Guest

Posted: Sun Nov 02, 2008 3:23 am Post subject: D100 compass

hello  i am from france'stoll  701/912)

 i am intrested in ther mount for the unit  

 is there a posibilitee to send a picture  ?

 thank you

 www.lafermeaquatique 

decorte  johnny

  

  

 [quote]   ---

dredmoody(at)cox.net
Guest

Posted: Sun Nov 02, 2008 4:33 am Post subject: D100 compass

Isn't the big ole flap motor in that  area?

  

 ED

   [quote][b]

lgingell

Joined: 10 Jan 2006
Posts: 50
Location: Lake California Airpark 68CA

Posted: Sun Nov 02, 2008 7:38 am Post subject: Re: D100 compass

Aft of the left seat, riveted to the floor is far enough away from the flap motor not to be affected.  This leaves room for the AP servos in the centre and the behind the right seat.

_________________
Zodiac XL/Jab 3300
http://lancegingell.com

sanyu(at)wanadoo.fr
Guest

Posted: Sun Nov 02, 2008 7:57 am Post subject: D100 compass

i do not have a flap motot my flaps are manual

regards

www.lafermeaquatique

decorte johnny

---

naumuk(at)alltel.net
Guest

Posted: Sun Nov 02, 2008 8:33 am Post subject: D100 compass

Dred+All-

     Unlike the XL, the HDS doesn't  have a hatch near the tail. Everything's all buttoned up and I'm not going to  tear the fuse top skins off or try crawling back to the tail. 

     One of the listers who has 200+  hours on his system installed his unit behind the passenger seat. The tray I  built for the passenger side is occupied with the battery and ELT. At the same  time I built the passenger side tray I built one for the pilot's side,  originally intending to mount a tool box on it. I decided against it and tore it  off, because the only thing gaining weight faster than I am is my project.  Pictures attached for the guy from France who wanted to see some  installations.

     Luckily, I haven't visited the  scrap yard recently so my pilot's side tray was still around. I just stuck it in  position for the picture- I'll cut it down to fit the compass unit.

     One question for all D-100  owners- how did you determine if the base unit and the compass are  mounted within plus or minus 1 degree of each other? I assume this is in  the roll axis.

                                                                                                                                                                                    Bill

 [quote]   ---

Pilot_side_tray.jpg

Description:

Filesize:

46.21 KB

Viewed:

598 Time(s)

Passenger_side_tray.jpg

Description:

Filesize:

41.59 KB

Viewed:

603 Time(s)

naumuk(at)alltel.net
Guest

Posted: Sun Nov 02, 2008 8:34 am Post subject: D100 compass

All-

    Well, one nice thing about the HDS is you don't have to worry about a 

flap motor!

                                                                    Bill

---

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Sun Nov 02, 2008 8:37 am Post subject: Re: D100 compass

I built my mount for the remote compass yesterday. I"m mounting well back in the fuselage aft of the large access panel.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

craig(at)craigandjean.com
Guest

Posted: Sun Nov 02, 2008 8:46 am Post subject: D100 compass

“how did you determine if the base unit and the compass are mounted within plus or minus 1 degree of each other?”  

   

Use a digital level.  

   

-- Craig  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Bill Naumuk

 Sent: Sunday, November 02, 2008 9:33 AM

 To: zenith-list(at)matronics.com

 Subject: Re: D100 compass  

  

  

     

Dred+All-  

    

    Unlike the XL, the HDS doesn't have a hatch near the tail. Everything's all buttoned up and I'm not going to tear the fuse top skins off or try crawling back to the tail.   

    

    One of the listers who has 200+ hours on his system installed his unit behind the passenger seat. The tray I built for the passenger side is occupied with the battery and ELT. At the same time I built the passenger side tray I built one for the pilot's side, originally intending to mount a tool box on it. I decided against it and tore it off, because the only thing gaining weight faster than I am is my project. Pictures attached for the guy from France who wanted to see some installations.  

    

    Luckily, I haven't visited the scrap yard recently so my pilot's side tray was still around. I just stuck it in position for the picture- I'll cut it down to fit the compass unit.  

    

    One question for all D-100 owners- how did you determine if the base unit and the compass are mounted within plus or minus 1 degree of each other? I assume this is in the roll axis.  

    

                                                                                                                                                                         Bill  

  [quote]    

----- Original Message -----   

    

From: Edward Moody II (dredmoody(at)cox.net)   

    

To: zenith-list(at)matronics.com (zenith-list(at)matronics.com)   

    

Sent: Sunday, November 02, 2008 7:29 AM  

    

Subject: Re: Zenith-List: D100 compass  

    

   

    

Isn't the big ole flap motor in that area?  

    

   

    

ED  

   	  Quote: 	
		    href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com 	
[b]

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Sun Nov 02, 2008 8:54 am Post subject: Re: D100 compass

 	  craig(at)craigandjean.com wrote: 	
		  â€œhow did you determine if the base unit and the compass are mounted within plus or minus 1 degree of each other?â€  

   

Use a digital level.  

	




I did the same. Assuming that the plane is built to specs the panel and the Dynon box will be level when installed.



The mount I built for rear fuselage installation had to correct for the 3 degree tilt of that area.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Afterfxllc(at)aol.com
Guest

Posted: Wed Nov 05, 2008 8:58 am Post subject: D100 compass

AOL Search: Your one stop for directions, recipes and all other Holiday needs. [url=http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from-aol-search/?ncid=emlcntussear00000001 ]Search Now[/url].

100_3631.JPG

Description:

Filesize:

122.14 KB

Viewed:

650 Time(s)

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Wed Nov 05, 2008 9:27 am Post subject: Re: D100 compass

 	  Afterfxllc(at)aol.com wrote: 	
		  	




Was there supposed to be text with your photo? If so it didn't show up.



That said doesn't not mounting the remote compass remotely sort of negate the idea of having a remote compass. They provide that long wire for a reason.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Afterfxllc(at)aol.com
Guest

Posted: Wed Nov 05, 2008 10:32 am Post subject: D100 compass

This is my 3rd panel built this way and they work perfect. Why route it in  some far off location if you don't have to. But what do I know.

  

 Jeff



AOL Search: Your one stop for directions, recipes and all other Holiday needs. [url=http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from-aol-search/?ncid=emlcntussear00000001 ]Search Now[/url].

  [quote][b]

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Wed Nov 05, 2008 12:08 pm Post subject: Re: D100 compass

That's great that it works for you but, quoting from the installation manual...



 	  Quote: 	
		  Keep the EDC-D10A away from any source of magnetic fields (such as electrical equipment and current-carrying wires) and ferrous material. 	




And if your intallation is anything like any other I've seen there are a metric buttload of "electrical equipment and current-carrying wires" where yours is mounted.



But what do they know, they just built it.

 	  Afterfxllc(at)aol.com wrote: 	
		  This is my 3rd panel built this way and they work perfect. Why route it in  some far off location if you don't have to. But what do I know.

  

 Jeff



	
[/quote]

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum