 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Ron Lendon
Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI
|
 Posted: Tue Dec 02, 2008 7:09 pm Post subject: 6-B-3 Rivet spacing on bottom skin |
 |
|
I am scratch building and wanted to confirm my best guess on the rivet spacing on the bottom skin. It looks like the perimeter (longeron) edges spacing could remain a constant of 9.5mm.
The other question is are the dimensions from front to back 235, 225, 245, 270 rivet centerlines? The next dimension 560 is the cutout edge and not the rivet centerline. The we have 400, 400, 400, 340 which appear to be on the rivet centerlines.
I want to layout the entire bottom skin rivet holes and cutouts but am a little unclear of the actual dimensions shown on the print. If I make all the dimensions to the rivet hole centerlines then the 560 cutout will be more like 540, probably not a show stopper just don't want to make a mistake.
The date on the print is 8/05
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/ |
|
| Back to top |
|
 |
jaybannist(at)cs.com
Guest
|
| Posted: Wed Dec 03, 2008 4:04 am Post subject: 6-B-3 Rivet spacing on bottom skin |
|
|
Ron,
My reading of the drawing is that the 560 dimension is the cutout, not the rivet centerline.
Jay in Dallas
Do not archive
--
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
|
|
| Back to top |
|
|
Ron Lendon
Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI
|
| Posted: Wed Dec 03, 2008 4:23 am Post subject: Re: 6-B-3 Rivet spacing on bottom skin |
|
|
That's my reading also. However if I stack all the dimensions +10mm for the rear rivet line spacing I get the total dimension of the length of the bottom skin. 235+225+245+270+560+400+400+400+340+10=1385
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/ |
|
| Back to top |
|
|
Ron Lendon
Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI
|
| Posted: Wed Dec 03, 2008 10:47 am Post subject: Re: 6-B-3 Rivet spacing on bottom skin |
|
|
Just talked to Roger and I will be making the access hole 540mm rather than 560mm. Now all the numbers line up front to back.
Also going to use 9mm edge spacing for the longeron rivet lines.
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
