Matronics Email Lists :: View topic - Rotax carburetor heat for sale

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rotax carburetor heat for sale

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

sonar1@cox.net

Joined: 02 Oct 2007
Posts: 55
Location: Santa Barbara, Ca

Posted: Wed Dec 24, 2008 1:29 pm Post subject: Rotax carburetor heat for sale

Had a forced landing in a cotton field. Thought it was carb ice, so I automatically ordered the carb heat kit from Lockwood.

Turns out that the problem was a totally clogged fuel filter (little black and clear plastic fibers).

It's a nice looking unit which circulates hot water around the carbs

Have decided I don't need it - perhaps someone in a more humid climate could use it?

Paid $295. Will sell for $220 plus $10 shipping.

Fred Sanford   Ca.  N9701

Do not archive

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

mcolbeck

Joined: 31 Dec 2006
Posts: 13
Location: Cochrane, Alberta

Posted: Wed Dec 24, 2008 1:41 pm Post subject: Re: Rotax carburetor heat for sale

I will take it. I have a ring mount and the $1200 heater box does not fit on a ring mount 912S.

I am up in Alberta Canada. How do you want the money? Email me offline and i can arrange. I use paypal but other means can be arranged.

Thanks

mark"at" mcm-inc.com

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
CH701 Builder and new flyer
Rudder, HS, and Elevator completed
Left wing Complete
50% complete on Right Wing
99% Complete on Fuselage
Engine installed almost ready to fire
Instrument panel and electrical Complete

lrm(at)skyhawg.com
Guest

Posted: Wed Dec 24, 2008 6:12 pm Post subject: Rotax carburetor heat for sale

Why is your filter clogged?  I had a gyro once or twice and the fuel 

filters kept stopping up.  What it was, was little pieces of foam 

breaking loose from that "anti-blow up foam" RAF used.  They used all 

the little pieces to fill in the voids.  You should check out why it was 

stopped up.  There is a reason and it isn't good.  Don't just use a band 

aid, fix it.  Take care, Larry N1345L



sonar1(at)cox.net wrote:

 	  Quote: 	
		   

 

 Had a forced landing in a cotton field. Thought it was carb ice, so I automatically ordered the carb heat kit from Lockwood.

 Turns out that the problem was a totally clogged fuel filter (little black and clear plastic fibers).

 It's a nice looking unit which circulates hot water around the carbs

 Have decided I don't need it - perhaps someone in a more humid climate could use it?

 Paid $295. Will sell for $220 plus $10 shipping.

 Fred Sanford   Ca.  N9701

 Do not archive

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p 20981#220981

 

 

 

 

 

 

 

 

 

 

 

 

 ------------------------------------------------------------------------

 

 

 Checked by AVG - http://www.avg.com

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

sonar1@cox.net

Joined: 02 Oct 2007
Posts: 55
Location: Santa Barbara, Ca

Posted: Wed Dec 24, 2008 10:09 pm Post subject: Re: Rotax carburetor heat for sale

IRM:

I had just gotten fuel at Colinga, Ca. in some ferocious winds - 25-40 knots on landing.  Don't know if I can blame the fuel or not. The engine started missing about 20 minutes later, and just kept getting worse.

When I cracked the filter open (the small plastic cone filters from ACS) there were obvious hairs everywhere.  Put in a new similar filter and flew it 20 minutes to Los Banos and drained all of the fuel. Fueled up and installed another similar filter, and flew it 2.5 hours home. Will be installing a larger fuel filter.

Still don't know the source of the fibers. They melt when I heat them. The fuel getting to the filter had to go through the screen of my ACS gascolator and down 1 foot of hose to get to the filter. There were no obvious fibers on the screen. A real mystery.........Fred

do not archive

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Thu Dec 25, 2008 6:13 pm Post subject: Re: Rotax carburetor heat for sale

Hi Mark,



Why does the heater box not fit with the ring mount?  Is the problem with the ring mount, or Zenith's firewall mount?  I have a 912 with a box and planned to put it in with the ring mount.  Do you think the box could be modified?



Thanks,



Tommy Walker in Alabama

 	  mcolbeck wrote: 	
		  I will take it. I have a ring mount and the $1200 heater box does not fit on a ring mount 912S.

I am up in Alberta Canada. How do you want the money? Email me offline and i can arrange. I use paypal but other means can be arranged.

Thanks

mark"at" mcm-inc.com

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
Tommy Walker
N25A - Anniston, AL

craig(at)craigandjean.com
Guest

Posted: Thu Dec 25, 2008 11:19 pm Post subject: Rotax carburetor heat for sale

You do know that in the old Skyshop FWF with the bedmount that they modified

the air box. They sliced the center section out and rotated it to make the

hot and cold air inlets vertical. Presumably they did this to make the

airbox fit in a 701.



Pictures attached, hopefully.



-- Craig



--

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

air_box.jpg

Description:

Filesize:

33.06 KB

Viewed:

542 Time(s)

airbox2.jpg

Description:

Filesize:

60.79 KB

Viewed:

520 Time(s)

mcolbeck

Joined: 31 Dec 2006
Posts: 13
Location: Cochrane, Alberta

Posted: Fri Dec 26, 2008 2:44 pm Post subject: Re: Rotax carburetor heat for sale

Tommy I should re state that. It is the Zenith FWF mount that attaches to the ring mount. The two upper arms do not allow for the heater box to sit down and align with the carbs. I don't think there is any way to modify it to fit.

If anyone knows a mod to make it work? With the bed mount the upper arms are at sharper angle and allow for the installation.

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Fri Dec 26, 2008 5:19 pm Post subject: Re: Rotax carburetor heat for sale

Mike did you take a look at the pictures Craig uploaded about modifying the air box?  I wonder if that would work in getting it to fit?



Tommy

Do Not Archive



 	  mcolbeck wrote: 	
		  Tommy I should re state that. It is the Zenith FWF mount that attaches to the ring mount. The two upper arms do not allow for the heater box to sit down and align with the carbs. I don't think there is any way to modify it to fit.

If anyone knows a mod to make it work? With the bed mount the upper arms are at sharper angle and allow for the installation.

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
Tommy Walker
N25A - Anniston, AL

mcolbeck

Joined: 31 Dec 2006
Posts: 13
Location: Cochrane, Alberta

Posted: Sat Dec 27, 2008 5:12 am Post subject: Re: Rotax carburetor heat for sale

I'm going to take another look at the air box to be sure it cant be modified.

.

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum