Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

flap alignment

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

garythomas8708(at)yahoo.c
Guest

Posted: Sun Jan 18, 2009 5:50 am Post subject: flap alignment

Thanks to all for the advice on what to do with flaps that are out of alignment. I called Zenith and they confirmed that the easiest way to fix it was to create a new piece of nylon on the end rib of one of the two flaps.



I did this by stretching the width of one slot in the required direction until the flaps were both aligned, and then used that as a template to create the new nylon that also lines up with the original rivet holes.  All it cost me was a new piece of nylon.



I would be inclined to recommend this as the way to go.  Like most people, I took great care to get my torque tube straight (I laid it on a bench to be sure the two arms were lined up) and then get my holes in the right place, etc.  With the whole thing put together, the thought of twisting my body around all those cables to re-drill the tube filled me with dread. 



Gary

601XL, been almost done for a while now

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum