Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

disassemble c-box question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
kitfox555(at)sbcglobal.ne
Guest





PostPosted: Sun Jan 18, 2009 6:17 pm    Post subject: disassemble c-box question Reply with quote

I needed to disassemble the c-box on my 582 to change the seal in the back. I got all the bolts out, took a piece of wood and a hammer. taped on the outer case and it only come about 3/8 ' open and will not come off . Has anyone had this happen to them Box has about 70 hrs on it everyone I have asked said it is suppose to just come right off what can be holding it up? IS there a trick to it? It works fine, just leak small drops out the back by the donut. (Don't like oil leaks) thanks for any input

Jerry Evans
KitfoxII
Magalia Calif.
N582'er'
kitfox 555


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



IMG_0297.JPG
 Description:
 Filesize:  1.84 MB
 Viewed:  303 Time(s)

IMG_0297.JPG


Back to top
chris(at)southernskies.ne
Guest





PostPosted: Mon Jan 19, 2009 4:36 am    Post subject: disassemble c-box question Reply with quote

Jerry-

There is a bolt inside one of the gears that you have to remove first before it will come apart. To get access to the bolt you take the front cover off. It is an allen bolt, I want to say 6 or 8 mm not sure on this. This bolts holds the smaller gear onto the shaft. Once you remove the bolt you can slide the gear off and seperate the rear of the gearbox.

Hope this helps.

Chris Bowles
KF 5
Time: 06:17:56 PM PST US
From: jerry evans <kitfox555(at)sbcglobal.net>
Subject: disassemble c-box question

I needed to disassemble the c-box on my 582 to change the seal in the back.
I got all the bolts out, took a piece of wood and a hammer. taped on the o
uter case and it only come about 3/8 ' open and will not come off . Has any
one had this happen to them-- Box has about 70 hrs on it- everyone I
have asked said it is suppose to just come right off- what can be holding
it up? IS there a trick to it?- It works fine, just leak small drops out
the back by the donut. (Don't like oil leaks) thanks for any input
Jerry Evans
KitfoxII
Magalia Calif.
N582'er'
kitfox 555


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
akflyer



Joined: 07 May 2007
Posts: 574
Location: Soldotna AK

PostPosted: Mon Jan 19, 2009 8:53 am    Post subject: Re: disassemble c-box question Reply with quote

http://www.800-airwolf.com/pdffiles/ARTICLES/part%2055.PDF

This takes you through it. When I pulled mine apart, I had to do just a little more than "tap" it.... I gave it a good "timex" tap and the front cover popped off. I think from you description that you are having issues getting the front cover off?


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
DO NOT ARCHIVE
Leonard Perry aka SNAKE
Soldotna AK
Avid "C" / Mk IV
582 (147 hrs and counting on the rebuild)
IVO IFA
Full Lotus 1450
#1 snake oil salesman since 1-22-2009

I would rather die trying to live, than to live trying not to die....
Back to top
View user's profile Send private message Send e-mail
jridgway



Joined: 12 Dec 2008
Posts: 64

PostPosted: Mon Jan 19, 2009 6:40 pm    Post subject: Re: disassemble c-box question Reply with quote

Get the CPS 582 DVD set. OUTSTANDING and takes you step by step through it all.
Jack


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group