Matronics Email Lists :: View topic - Vans Manifold pressure fitting replacement

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Vans Manifold pressure fitting replacement

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

egohr1

Joined: 17 Jan 2006
Posts: 38
Location: Oklahoma City

Posted: Fri Jan 16, 2009 4:15 am Post subject: Vans Manifold pressure fitting replacement

FYI.  

McMaster carr part number 5058K243   	ALUMINUM SINGLE-BARBED TUBE FITTINGS, ADAPTER FOR 1/4" TUBE ID X 10-32 UNF MALE, BLUE



This will replace the nylon fitting sent with vans FWF kit for connection to a AFS or other system.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
eric gohr
EGOHR86@alumni.carnegiemellon.edu

indigoonlatigo(at)msn.com
Guest

Posted: Mon Jan 19, 2009 10:52 am Post subject: Vans Manifold pressure fitting replacement

What is wrong with the nylon one van's sends?? Doesn't work with AFS or is it just the material it is made of.

  

 John G



 	  Quote: 	
		   Subject: Vans Manifold pressure fitting replacement

 From: EGOHR86(at)alumni.carnegiemellon.edu

 Date: Fri C 16 Jan 2009 04:15:22 -0800

 To: rv10-list(at)matronics.com

 

 --> RV10-List message posted by: "egohr1" <EGOHR86(at)alumni.carnegiemellon.edu>

 

 FYI. 

 McMaster carr part number 5058K243 ALUMINUM SINGLE-BARBED TUBE FITTINGS C ADAPTER FOR 1/4" TUBE ID X 10-32 UNF MALE C BLUE

 

 This will replace the nylon fitting sent with vans FWF kit for connection to a AFS or other system.

 

 --------

 eric gohr

 EGOHR86(at)alumni.carnegiemellon.edu

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=225053#225053

 

 [b]&gt==

 

 

 


	


  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

ricksked(at)embarqmail.co
Guest

Posted: Mon Jan 19, 2009 11:11 am Post subject: Vans Manifold pressure fitting replacement

Hose barb on the. Afs sensor is 1/4 inch vans is 1/8

Sent via BlackBerry by AT&T

From:  John Gonzalez 

Date: Mon, 19 Jan 2009 10:51:37 -0800

To: RV 10 group<rv10-list(at)matronics.com>

Subject: RE: RV10-List: Vans Manifold pressure fitting replacement

 What is wrong with the nylon one van's sends?? Doesn't work with AFS or is = it just the material it is made of.

 &nbsp=3B

 John G



&gt=3B Subject: RV10-List: Vans Manifold pressure fitting rep= lacement

&gt=3B From: EGOHR86(at)alumni.carnegiemellon.edu

&gt=3B Date: = Fri=2C 16 Jan 2009 04:15:22 -0800

&gt=3B To: rv10-list(at)matronics.com

= &gt=3B 

&gt=3B --&gt=3B RV10-List message posted by: "egohr1" &lt=3BEGOH= R86(at)alumni.carnegiemellon.edu&gt=3B

&gt=3B 

&gt=3B FYI. 

&gt=3B Mc= Master carr part number 5058K243 ALUMINUM SINGLE-BARBED TUBE FITTINGS=2C AD= APTER FOR 1/4" TUBE ID X 10-32 UNF MALE=2C BLUE

&gt=3B 

&gt=3B This w= ill replace the nylon fitting sent with vans FWF kit for connection to a AF= S or other system.

&gt=3B 

&gt=3B --------

&gt=3B eric gohr

&gt= =3B EGOHR86(at)alumni.carnegiemellon.edu

&gt=3B 

&gt=3B 

&gt=3B 

&= gt=3B 

&gt=3B Read this topic online here:

&gt=3B 

&gt=3B http://f= orums.matronics.com/viewtopic.php?p=3D225053#225053

&gt=3B 

&gt=3B &gt= =3D=3D

&gt=3B 

&gt=3B 

&gt=3B 



 =  	  Quote: 	
		    _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D _-=3D          - The RV10-List Email Forum - _-=3D Use the Matronics List Features Navigator to browse _-=3D the many List utilities such as List Un/Subscription, _-=3D Archive Search & Download, 7-Day Browse, Chat, FAQ, _-=3D Photoshare, and much much more: _-=3D _-=3D   --> http://www.matronics.com/Navigator?RV10-List _-=3D _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D _-=3D               - MATRONICS WEB FORUMS - _-=3D Same great content also available via the Web Forums! _-=3D _-=3D   --> http://forums.matronics.com _-=3D _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D _-=3D             - List Contribution Web Site - _-=3D  Thank you for your generous support! _-=3D                              -Matt Dralle, List Admin. _-=3D   --> http://www.matronics.com/contribution _-=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

indigoonlatigo(at)MSN.COM
Guest

Posted: Mon Jan 19, 2009 11:35 am Post subject: Vans Manifold pressure fitting replacement

Thanks C I'll order this now and I should need it in a few days. Really appreciate it!!!



 John



   

 To: rv10-list(at)matronics.com

Subject: Re: Vans Manifold pressure fitting replacement

From: ricksked(at)embarqmail.com

Date: Mon C 19 Jan 2009 19:09:27 +0000



  .ExternalClass .EC_hmmessage P {;} .ExternalClass body.EC_hmmessage {font-size:10pt=3B font-family:Verdana;}  Hose barb on the. Afs sensor is 1/4 inch vans is 1/8

 Sent via BlackBerry by AT&T

   From: John Gonzalez 

Date: Mon C 19 Jan 2009 10:51:37 -0800

To: RV 10 group<rv10-list(at)matronics.com>

Subject: RE: Vans Manifold pressure fitting replacement

 



What is wrong with the nylon one van's sends?? Doesn't work with AFS or is = it just the material it is made of.

 =3B

John G



 	  Quote: 	
		  =3B Subject: Vans Manifold pressure fitting rep= lacement

=3B From: EGOHR86(at)alumni.carnegiemellon.edu

=3B Date: = Fri=2C 16 Jan 2009 04:15:22 -0800

=3B To: rv10-list(at)matronics.com

= >=3B 
	


 	  Quote: 	
		  =3B -->=3B RV10-List message posted by: "egohr1" <=3BEGOH= R86(at)alumni.carnegiemellon.edu>=3B

=3B 

=3B FYI. 

=3B Mc= Master carr part number 5058K243 ALUMINUM SINGLE-BARBED TUBE FITTINGS=2C AD= APTER FOR 1/4" TUBE ID X 10-32 UNF MALE=2C BLUE

=3B 

=3B This w= ill replace the nylon fitting sent with vans FWF kit for connection to a AF= S or other system.

=3B 

=3B --------

=3B eric gohr

= =3B EGOHR86(at)alumni.carnegiemellon.edu

=3B 

=3B 

=3B 

&= gt=3B 
	


 	  Quote: 	
		  =3B Read this topic online here:

=3B 

=3B http://f= orums.matronics.com/viewtopic.php?p=3D225053#225053

=3B 

=3B 

= =3D=3D

=3B 

=3B 

=3B 


	


=  	  Quote: 	
		  [b] 	
¦·›~‰í² CÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž8^E]t.+-f¢”Z+ºe CzØ^1«k¢xœ°¸¬´Wš¶êÞ°Ö¯Š¢»hnº0±ëazf§È¸¬¶ëb–+bzË.r¬.+-RÒ¹»®*mŠ‰ÀÈb½äžj·!Œ'–†ì6²º0±à¡jÑ(at)(at)øh¶‹!j·šÙ®r®r¨æ¡çá¶Úÿ 0™«k¢xœ±Ê&üÖ¯Š¢´U×Bâ²Øm¶ŸÿÃ &jÚèž' Cr‰¿5«â«huÐ¸¬·öŒ4N4€’X(at)E9 I&¦z Þj×(ž×§µ©l¡«ÚŠV›•ëâjØ^YæÅ¢»¦±¨kyøm¶Ÿÿ~ŠîšÉš¶º'‰Ë¢hm¶Ÿÿ~ŠîšÉš¶º'‰Ë¢oÚ.+- ‰í®&î¶*'YæÒŠ×“…©äÊ‹Ÿ¢¼¨º¸êèºË.¦š+´Æ´:Ú–W‹ŠË(at)vh§jÞ~m§ÿðÃ š¶º'‰Ë¢oÜ¢{k‰»Š‰á¶Úÿ 0™«k¢xœ±Ê&ýÊ'¶¸›ºØ¨Ÿö¿o÷èžßéïÛ¡Ü¿†Ù¥  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum