Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Build area size?

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

john.marzulli(at)gmail.co
Guest

Posted: Sat Jan 31, 2009 7:12 pm Post subject: Build area size?

This sort of mail normally gets sent before a project gets started but...



It looks like we have to move out of our current rental. Finding a house with a garage has been a pain.



We found a place we like, but the garage was measured at only 188"x125".

 

Has anyone worked on a 701 this late in the project with that small a space?



I even used SketchUp to try to visualize the space...



Any feedback would be helpful.

Thanks and DO NOT ARCHIVE!

 John Marzulli



http://www.GenevieveMarzulli.org/

http://marzulli.smugmug.com/

http://701Builder.blogspot.com/

 http://www.JohnMarzulli.net/

potential_garage.jpg

Description:

Filesize:

124.81 KB

Viewed:

494 Time(s)

rwehba(at)yahoo.com
Guest

Posted: Sun Feb 01, 2009 5:08 am Post subject: Build area size?

if you are buying , and have room , you can do as i did for a shop , talked to one of the companys that put up those carports you see everywhere. told them what i needed and they priced it ,,great price. as i am in the construction trade, could not have done it myself any cheaper.  poured a slab and they put it up in 6-1/2 hours.  it is a 15'x30' x 9' tall closed eaves with a 3' walk in door and a 9'wide7'tall roll up garage door if you need a picture email me and i'll send ya some.



ronnie wehba



--- On Sat, 1/31/09, John Marzulli <john.marzulli(at)gmail.com> wrote:

  	  Quote: 	
		  From: John Marzulli <john.marzulli(at)gmail.com>

Subject: Build area size?

To: zenith701801-list(at)matronics.com

Date: Saturday, January 31, 2009, 9:00 PM



 This sort of mail normally gets sent before a project gets started but...



It looks like we have to move out of our current rental. Finding a house with a garage has been a pain.



We found a place we like, but the garage was measured at only 188"x125".



Has anyone worked on a 701 this late in the project with that small a space?



I even used SketchUp to try to visualize the space...



Any feedback would be helpful.

Thanks and DO NOT ARCHIVE!

John Marzulli



http://www.GenevieveMarzulli.org/

http://marzulli.smugmug.com/

http://701Builder.blogspot.com/

http://www.JohnMarzulli.net/



	


         [quote][b]

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Sun Feb 01, 2009 6:16 am Post subject: Build area size?

Hey John, sorry to hear about your impending move.  To answer your question, you could probably do your build in that small of a space but I would think that you will find it very frustrating.  It doesn't leave a lot of room and you will be constantly tripping over your work.  I'm in a 20'x30' garage and I'm still tripping over myself sometimes.



Maybe your space would work better if you could find off site storage for some af your completed components.  Another suggestion is to move the whole project offsite.  You might be able to find some workspace at another location resonably priced.  I know that this adds significantly to the price of the project but you appear to be pretty far along on your blog so the rental would not likely be for very long.  Things to think about at least.



Best of luck with you build and your move.



Doug MacDonald

CH-701 Scratch Builder

NW Ontario, Canada



Do Not Archive

--- On Sat, 1/31/09, John Marzulli <john.marzulli(at)gmail.com> wrote:



 	  Quote: 	
		   

 It looks like we have to move out of our current rental.

 Finding a house

 with a garage has been a pain.

 

 We found a place we like, but the garage was measured at

 only 188"x125".

 

 Has anyone worked on a 701 this late in the project with

 that small a space?

 

 Any feedback would be helpful.

challgren(at)mac.com
Guest

Posted: Sun Feb 01, 2009 9:53 am Post subject: Build area size?

Ron:



I am facing the same problem about a garage/hangar.  Modifying a current stand alone garage on my property would be over $5 grand.  I would appreciate your emailing me a picture of your solution to the hangar problem.

Stan

701/3300



On Feb 1, 2009, at 5:55 , ron wehba wrote:

[quote]if you are buying , and have room , you can do as i did for a shop , talked to one of the companys that put up those carports you see everywhere. told them what i needed and they priced it ,,great price. as i am in the construction trade, could not have done it myself any cheaper.  poured a slab and they put it up in 6-1/2 hours.  it is a 15'x30' x 9' tall closed eaves with a 3' walk in door and a 9'wide7'tall roll up garage door if you need a picture email me and i'll send ya some.



ronnie wehba



--- On Sat, 1/31/09, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:

  	  Quote: 	
		  From: John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)>

Subject: Build area size?

To: zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com)

Date: Saturday, January 31, 2009, 9:00 PM



 This sort of mail normally gets sent before a project gets started but...

	
 	  Quote: 	
		  

	
[b]

raymondj(at)frontiernet.n
Guest

Posted: Sun Feb 01, 2009 10:31 am Post subject: Build area size?

I have my 801 rudder and stab/elevator kit on a shelf hanging less than 1ft 

down from the ceiling over a workbench.  Similar shelves will store many of 

my parts as the build progresses.  Anything you can store in another part of 

the house will help, but make a list so you can look up where you put 

things.  Don't ask me why I recommend this. :^)



HTH

Raymond Julian

Kettle River, MN



"Hope for the best,

but prepare for the worst."

---

craig(at)craigandjean.com
Guest

Posted: Sun Feb 01, 2009 10:31 am Post subject: Build area size?

Is there enough vertical space to hang the wings from the ceiling?  

   

Store the tail under the bed.  

   

601’s have been built in shipping containers and there is/was a 701 builder on the list working in a tent at 6000 ft in Colorado.  

   

Of course real builders build in their living rooms and one used his shiny new Jabiru 3300 as a glass-topped coffee table.  

   

-- Craig  

     

From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of John Marzulli

 Sent: Saturday, January 31, 2009 8:00 PM

 To: zenith701801-list(at)matronics.com

 Subject: Build area size?  

  

   

This sort of mail normally gets sent before a project gets started but...

 

 It looks like we have to move out of our current rental. Finding a house with a garage has been a pain.

 

 We found a place we like, but the garage was measured at only 188"x125".

 

 Has anyone worked on a 701 this late in the project with that small a space?

 

 I even used SketchUp to try to visualize the space...

 

 Any feedback would be helpful.

 

 

 Thanks and DO NOT ARCHIVE!

  John Marzulli

 

 http://www.GenevieveMarzulli.org/

 http://marzulli.smugmug.com/

 http://701Builder.blogspot.com/

 http://www.JohnMarzulli.net/  

       [quote][b]

ch701builder(at)yahoo.com
Guest

Posted: Sun Feb 01, 2009 11:54 am Post subject: Build area size?

HI John,

I am building out of a Cover-It shelter (12'x30'). I do have a separate place to keep other objects as I build them, but I have designed a way to hang the wings on the ceiling-rafters after I have built them.



just browse through the pictures and find the shelter, Craig was talking about.



http://picasaweb.google.com/ch701builder/SN4765#



I have also seen a person build a 601 is a smaller "tent" than mine.



If there is a will, there is a way!!



Good luck, and may you find the best solution. It does get frustrating stumbling over everything, but do what you can, and hang in there.



Keith

N 38.9940

W 105.1305

Alt. 9,100' (not 6000', the air isn't thin enough at that altitude)



From: Craig Payne <craig(at)craigandjean.com>

To: zenith701801-list(at)matronics.com

Sent: Sunday, February 1, 2009 11:24:23 AM

Subject: RE: Build area size?



                

Is there enough vertical space to hang the wings from the ceiling?   

     

Store the tail under the bed.   

     

601¢s have been built in shipping containers and there is/was a 701 builder on the list working in a tent at 6000 ft in Colorado.   

     

Of course real builders build in their living rooms and one used his shiny new Jabiru 3300 as a glass-topped coffee table.   

     

-- Craig   

       

From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of John Marzulli

 Sent: Saturday, January 31, 2009 8:00 PM

 To: zenith701801-list(at)matronics.com

 Subject: Build area size?   

  

     

This sort of mail normally gets sent before a project gets started but...

 

 It looks like we have to move out of our current rental. Finding a house with a garage has been a pain.

 

 We found a place we like, but the garage was measured at only 188"x125".

 

 Has anyone worked on a 701 this late in the project with that small a space?

 

 I even used SketchUp to try to visualize the space...

 

 Any feedback would be helpful.

 

 

 Thanks and DO NOT ARCHIVE!

  John Marzulli

 

 http://www.GenevieveMarzulli.org/

 http://marzulli.smugmug.com/

 http://701Builder.blogspot.com/

 http://www.JohnMarzulli.net/   

       [quote]"_blank" href="http://www.matronics.com/Navigator?Zenith701801-List">http --> http://www.matronics.com/con================


[b]

rwehba(at)yahoo.com
Guest

Posted: Mon Feb 02, 2009 4:04 am Post subject: Build area size?

i'll get some pics later today, my camera is at my office. 



ronnie wehba



--- On Sun, 2/1/09, Stanley Challgren <challgren(at)mac.com> wrote:

  	  Quote: 	
		  From: Stanley Challgren <challgren(at)mac.com>

Subject: Re: Build area size?

To: zenith701801-list(at)matronics.com

Date: Sunday, February 1, 2009, 11:47 AM



 Ron: 



 I am facing the same problem about a garage/hangar.  Modifying a current stand alone garage on my property would be over $5 grand.  I would appreciate your emailing me a picture of your solution to the hangar problem.

 



 Stan

 701/3300

 



 

  On Feb 1, 2009, at 5:55 , ron wehba wrote:

  	  Quote: 	
		      if you are buying , and have room , you can do as i did for a shop , talked to one of the companys that put up those carports you see everywhere. told them what i needed and they priced it ,,great price. as i am in the construction trade, could not have done it myself any cheaper.  poured a slab and they put it up in 6-1/2 hours.  it is a 15'x30' x 9' tall closed eaves with a 3' walk in door and a 9'wide7'tall roll up garage door if you need a picture email me and i'll send ya some.



ronnie wehba



--- On Sat, 1/31/09, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:

  	  Quote: 	
		  From: John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)>

Subject: Build area size?

To: zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com)

Date: Saturday, January 31, 2009, 9:00 PM



 This sort of mail normally gets sent before a project gets started but...

	
 	  Quote: 	
		  

	


	


	


         [quote][b]

jf3sb

Joined: 02 Dec 2007
Posts: 20
Location: Olathe, KS

Posted: Tue Feb 10, 2009 9:06 pm Post subject: Re: Build area size?

I was building in a 14' x 24' garage for awhile and got along pretty well.  Built all the airfoils including the wings in there, including storage of everything except the first wing, which got moved into the house.  You can get pretty creative with shelf space and storing stuff above the rafters, hoisted under the ceiling, etc.  Don't let tight quarters stop you from building.



John Flavin

Olathe, KS

john.marzulli(at)gmail.co
Guest

Posted: Tue Feb 10, 2009 10:46 pm Post subject: Build area size?

A friend is willing to let me store my wings in their garage, which will make things easier in the new place. The trick will be getting the engine on. 

 John Marzulli



http://www.GenevieveMarzulli.org/

http://marzulli.smugmug.com/

http://701Builder.blogspot.com/

 http://www.JohnMarzulli.net/



 On Tue, Feb 10, 2009 at 9:06 PM, jf3sb <jf3sb(at)yahoo.com (jf3sb(at)yahoo.com)> wrote:

 [quote]--> Zenith701801-List message posted by: "jf3sb" <jf3sb(at)yahoo.com (jf3sb(at)yahoo.com)>

 

I was building in a 14' x 24' garage for awhile and got along pretty well.  Built all the airfoils including the wings in there, including storage of everything except the first wing, which got moved into the house.  You can get pretty creative with shelf space and storing stuff above the rafters, hoisted under the ceiling, etc.  Don't let tight quarters stop you from building.

 

John Flavin

Olathe, KS





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=229677#229677

  utilities such as List Un/Subscription,

 ://www.matronics.com/Navigator?Zenith701801-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List

 ref="http://forums.matronics.com/" target="_blank">http://forums.matronics.com

 p;                  -Matt Dralle, List Admin.

 =====



[b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum