Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

How many push pull contol cables (cabin heat type)

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Mike Whisky



Joined: 05 Jun 2006
Posts: 336
Location: Switzerland

PostPosted: Tue Feb 17, 2009 11:29 am    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

I took the time to really get my workshop cleaned up and while working through my "to be used" parts I came across a 4th push pull cable (cabin heat type). I will have two for cabin heat (rear & front) one for alternative air for the airbox. So why is there a forth since it came with the kit?

Am I missing something here?

Michael


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-10 builder (flying)
#511
Back to top
View user's profile Send private message Visit poster's website
rene(at)felker.com
Guest





PostPosted: Tue Feb 17, 2009 11:39 am    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Carb heat for o-540's ?

Rene' Felker
RV-10 N423CF Flying
801-721-6080
--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
orchidman



Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE

PostPosted: Tue Feb 17, 2009 11:45 am    Post subject: Re: How many push pull contol cables (cabin heat type) Reply with quote

I have it also. If you installed the air cut off door in the front of the air box, then you would use it.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying)
Back to top
View user's profile Send private message
Mike Whisky



Joined: 05 Jun 2006
Posts: 336
Location: Switzerland

PostPosted: Tue Feb 17, 2009 11:49 am    Post subject: Re: How many push pull contol cables (cabin heat type) Reply with quote

Ok great thanks guys, that will come as a spare one since I have an IO-540.

Cheers
Michael


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-10 builder (flying)
#511
Back to top
View user's profile Send private message Visit poster's website
rene(at)felker.com
Guest





PostPosted: Tue Feb 17, 2009 12:18 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Also, I used mine for air control to the "new" oil cooler I just put in.

Rene' Felker
RV-10 N423CF Flying
801-721-6080

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Tue Feb 17, 2009 1:39 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Any pictures of the "new oil cooler" installation please Rene?

Regards

Patrick Pulis
RV-10 #40299 VH-XPP
Adelaide, South Australia


From: Rene Felker <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 18 February, 2009 6:45:04 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)

--> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>

Also, I used mine for air control to the "new" oil cooler I just put in.

Rene' Felker
RV-10 N423CF Flying
801-721-6080

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Tue Feb 17, 2009 1:50 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

I don’t have any pictures, but the new cooler is the one Alex sells and I put a butterfly valve on the back of the baffling in order to control the airflow.  I can’t remember who I bought the butterfly valve from…..I will have to look that up at home.

Rene' Felker
RV-10 N423CF Flying

801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
Sent: Tuesday, February 17, 2009 2:36 PM
To: rv10-list(at)matronics.com
Subject: Re: Re: How many push pull contol cables (cabin heat type)



Any pictures of the "new oil cooler" installation please Rene?



Regards



Patrick Pulis

RV-10 #40299 VH-XPP

Adelaide, South Australia



From: Rene Felker <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 18 February, 2009 6:45:04 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)

--> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>

Also, I used mine for air control to the "new" oil cooler I just put in.

Rene' Felker
RV-10 N423CF Flying
801-721-6080

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Tue Feb 17, 2009 3:34 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Rene, how much was the cooler and did you need to replace both the Vans supplied oil cooler and the mounting box?

Any chance of a contact for Alex please.

Regards


Patrick Pulis

RV-10 #40299 VH-XPP

Adelaide, South Australia

Do Not Archive

From: Rene Felker <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 18 February, 2009 8:19:36 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)


I don’t have any pictures, but the new cooler is the one Alex sells and I put a butterfly valve on the back of the baffling in order to control the airflow. I can’t remember who I bought the butterfly valve from…..I will have to look that up at home.

Rene' Felker
RV-10 N423CF Flying

801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
Sent: Tuesday, February 17, 2009 2:36 PM
To: rv10-list(at)matronics.com
Subject: Re: Re: How many push pull contol cables (cabin heat type)



Any pictures of the "new oil cooler" installation please Rene?



Regards

 

Patrick Pulis

RV-10 #40299  VH-XPP

Adelaide, South Australia

 

From: Rene Felker <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 18 February, 2009 6:45:04 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)

--> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>

Also, I used mine for air control to the "new" oil cooler I just put in.

Rene' Felker
RV-10 N423CF Flying
801-721-6080

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Tue Feb 17, 2009 9:05 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Got the oil cooler here

http://www.aviationtechproducts.com/html/engine__parts.html

$427

I have not flown with it yet, so I don’t know if it will help my oil heat problem. In the summer I have to restrict climbs due to oil heat……we will see this year.

Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….

http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html

Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Tue Feb 17, 2009 10:03 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Many thanks Rene.

Regards

Pat

Do Not Archive


From: Rene <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 18 February, 2009 3:33:56 PM
Subject: RE: Re: How many push pull contol cables (cabin heat type)


Got the oil cooler here

http://www.aviationtechproducts.com/html/engine__parts.html

$427

I have not flown with it yet, so I don’t know if it will help my oil heat problem. In the summer I have to restrict climbs due to oil heat……we will see this year.

Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….
 
http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html

Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Wed Feb 18, 2009 5:56 am    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

That oil cooler gives probably about 15-20 degrees cooler oil compared to the standard Van's cooler. I would consider that a must have if you are in a hot environment. If you are between heat and cold, then you might want to go with the valve so you can let your oil warm up when it's cold. It works really well. When open, it doesn't look like it will restrict airflow much at all, but closing it will let your oil warm up when it's cold. For those who don't put in the carb heat/alternate air door, you can use the cable that comes with the FWF kit to work this valve.

do not archive

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694



On Feb 18, 2009, at 12:03 AM, Rene wrote:
[quote]Got the oil cooler here

http://www.aviationtechproducts.com/html/engine__parts.html

$427

I have not flown with it yet, so I don’t know if it will help my oil heat problem. In the summer I have to restrict climbs due to oil heat……we will see this year.

Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….

http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html

Rene'
801-721-6080

[b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Wed Feb 18, 2009 1:41 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Many thanks Jesse.

Regards

Pat
South Oz

Do Not Archive


From: Jesse Saint <jesse(at)saintaviation.com>
To: rv10-list(at)matronics.com
Sent: Thursday, 19 February, 2009 12:25:01 AM
Subject: Re: Re: How many push pull contol cables (cabin heat type)

That oil cooler gives probably about 15-20 degrees cooler oil compared to the standard Van's cooler. I would consider that a must have if you are in a hot environment. If you are between heat and cold, then you might want to go with the valve so you can let your oil warm up when it's cold.  It works really well. When open, it doesn't look like it will restrict airflow much at all, but closing it will let your oil warm up when it's cold. For those who don't put in the carb heat/alternate air door, you can use the cable that comes with the FWF kit to work this valve.

do not archive

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694

On Feb 18, 2009, at 12:03 AM, Rene wrote:
Quote:
Got the oil cooler here

http://www.aviationtechproducts.com/html/engine__parts.html

$427

I have not flown with it yet, so I don’t know if it will help my oil heat problem. In the summer I have to restrict climbs due to oil heat……we will see this year.

  Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….

http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html

Rene'
801-721-6080

hhtt========================
target=_blank rel=nofollow>http://www.matronics.com/contribution
===========



Make Yahoo!7 your homepage and win a trip to the Quiksilver Pro. [url=http://au.rd.yahoo.com/homepage/mailtagline/*http://au.docs.yahoo.com/homepageset/?p1=other&p2=au&p3=tagline]Find out more[/url]. [quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Sun Feb 22, 2009 12:11 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Here is a picture of the new cooler….looks just like the old cooler and the air controller….



Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



New-oil-Cooler.gif
 Description:
 Filesize:  168.4 KB
 Viewed:  5826 Time(s)

New-oil-Cooler.gif


Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Sun Feb 22, 2009 1:34 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?

Regards

Pat


From: Rene <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Monday, 23 February, 2009 6:39:47 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)


Here is a picture of the new cooler….looks just like the old cooler and the air controller….
 


Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rene(at)felker.com
Guest





PostPosted: Sun Feb 22, 2009 2:14 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Yep, it is the same form factor, just has more fins inside.  I will not know until this summer how much it helped the oil temp.

It only took about 10 minutes to change it out.  If anyone wants a stock cooler cheap….I got one.

Rene' Felker
RV-10 N423CF Flying

801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
Sent: Sunday, February 22, 2009 2:26 PM
To: rv10-list(at)matronics.com
Subject: Re: Re: How many push pull contol cables (cabin heat type)



Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?



Regards



Pat



From: Rene <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Monday, 23 February, 2009 6:39:47 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)
Here is a picture of the new cooler….looks just like the old cooler and the air controller….



Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Sun Feb 22, 2009 3:45 pm    Post subject: How many push pull contol cables (cabin heat type) Reply with quote

Thanks Rene'

Do Not Archive


From: Rene Felker <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Monday, 23 February, 2009 8:43:02 AM
Subject: RE: Re: How many push pull contol cables (cabin heat type)


Yep, it is the same form factor, just has more fins inside. I will not know until this summer how much it helped the oil temp.

It only took about 10 minutes to change it out. If anyone wants a stock cooler cheap….I got one.

Rene' Felker
RV-10 N423CF Flying

801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
Sent: Sunday, February 22, 2009 2:26 PM
To: rv10-list(at)matronics.com
Subject: Re: Re: How many push pull contol cables (cabin heat type)



Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?



Regards



Pat



From: Rene <rene(at)felker.com>
To: rv10-list(at)matronics.com
Sent: Monday, 23 February, 2009 6:39:47 AM
Subject: RE: RV10-List: Re: How many push pull contol cables (cabin heat type)
Here is a picture of the new cooler….looks just like the old cooler and the air controller….



Rene'
801-721-6080


--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group