toaster73(at)embarqmail.c Guest
|
Posted: Mon Feb 23, 2009 9:12 am Post subject: E-bus and sd-8 alternator connections Z-13/8 Q |
|
|
Bob,
I am laying out my RV-10 wiring based on the Z-13/8 Q. My battery is behind the bagage area as is my master contactor. Z-13/8 Q shows the SD-8 going to the battery side of the contactor. My battery bus will be next to the battery and I will run the e-bus supply wire from there foward to the panel.
Question: Instead of running another wire all the way back to the master contactor from the SD-8 could I just run from the SD-8 to the E-bus which is under the panel?
With this arrangment I would activate e-buss when needed and then sd-8, otherwise sd-8 would be dormant and only supply power when e-buss is activated.
Thanks
Chris Lucas
RV-10
#40072
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|