 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
patreilly43(at)hotmail.co
Guest
|
 Posted: Mon Mar 02, 2009 2:42 pm Post subject: Ski Size |
 |
|
Lynn Matteson, Looking at snowboards to convert to skis. What length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
[quote][b]
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
 |
Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
| Posted: Mon Mar 02, 2009 5:21 pm Post subject: Ski Size |
|
|
Hi Pat-
Mine are about 600 sq inches each. I measured a Cub that turned out
to be 768 sq in for the pair, and another pair for a
Cub...Federals...that measured 1008 sq in for the pair. So mine are a
bit oversize, but work very well in 12-14" of snow. Narrow skis seem
to work better in hard snow, and wider are better for lighter snow,
it seems.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 2, 2009, at 5:41 PM, Pat Reilly wrote:
| Quote: | Lynn Matteson, Looking at snowboards to convert to skis. What
length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
============================================================ _-
============================================================ _-
contribution_-
============================================================
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
| Back to top |
|
|
CDNCH701
Joined: 26 Feb 2009
Posts: 11
Location: Winnipeg, MB Canada
|
| Posted: Mon Mar 02, 2009 6:39 pm Post subject: Ski Size |
|
|
Hey Lynn and Pat this link is from a 701 builder with some home built skis
on Yahoo, and here are a couple of messages... this is what he had to say:
"hi all took some time but the new skis are installed and tested
perfectly this past weekend. performed very well on the snow which b/c
of the recent thaw surface was very dense and hard. i can pull the
plane with one finger on prop on top of this stuff. because of the
cant in the main gear the outer edge of the ski is lower then i would
like but still performed very well on the grass.all skis are 15" wide
mains are 48" long and nw is 36" top speed was down about 5mph and is
noticable less responsive to full throttle up. A mushy 4ooo rpm to
5200 in flight, the engine responds like normal but the asi is a
little slower to catch up. climbout was still impressive as ever.
total weight of all hardware is 60 lbs. so not so good for passenger
carrying but at least spent 2hours sipping around doing t & g's with
the bunch of hanger buddies only able to watch from the snowbanks.
will post some pics soon but will look like carbon copies of the ones
listed at zenith."
"just uploaded some photos. mains are 14 x 48 x 1/8 alum sheet with a
3.5" incline. 2- 1 x 2" rails on 12" centers stitch welded with a 15 "
wide sheet of 1/8 uhmw popriveted to bottoms. an bolts for mounting
hardware and clips. rest of the cable, bungii and hardware is local
building material. the nw pivot is a shouldered bushing machined to
size witha 5/16 x 2 an bolt and locknut. the "s" brace is a just in
case support. I can remove the ski without touching the nw axle. tail
wheels are hockey pucks board and oilite bushings pressed into."
http://groups.yahoo.com/group/701builders/photos/album/995817052/pic/list
Let me know if you can access this link, there are some pics there of the
skis...
R.D.(Ron) Leclerc
CH701 Plans(Scrap) Builder #7-6699
Porsche Power Geared Redrive
Winnipeg, MB Canada
infow(at)mts.net
3/2/2009 7:56:49 PM
Hi Pat-
Mine are about 600 sq inches each. I measured a Cub that turned
out to be 768 sq in for the pair, and another pair for a
Cub...Federals...that measured 1008 sq in for the pair. So mine
are a bit oversize, but work very well in 12-14" of snow. Narrow
skis seem to work better in hard snow, and wider are better for
lighter snow, it seems.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 2, 2009, at 5:41 PM, Pat Reilly wrote:
Lynn Matteson, Looking at snowboards to convert to skis. What
length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
============================================================
_-
============================================================
_- contribution_-
============================================================
= - The Kitfox-List Email Forum -
http://www.matronics.com/Navigator?Kitfox-List
= - MATRONICS WEB FORUMS -
your generous support!
->
http://www.matronics.com/contribution
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
nail13zg(at)centurytel.ne
Guest
|
| Posted: Mon Mar 02, 2009 6:54 pm Post subject: Ski Size |
|
|
Ron,
How 'bout posting your pictures to the matronics/kitfox list
Trey Moran
---
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
patreilly43(at)hotmail.co
Guest
|
|
| Back to top |
|
|
CDNCH701
Joined: 26 Feb 2009
Posts: 11
Location: Winnipeg, MB Canada
|
| Posted: Mon Mar 02, 2009 7:24 pm Post subject: Ski Size |
|
|
Let me know if this works...
Ron
Ron, I couldn't open the photos.
do not archive
Pat Reilly
Mod 3 582 Rebuild
Rockford, IL
From: infow(at)mts.net
To: kitfox-list(at)matronics.com
Date: Mon, 2 Mar 2009 20:38:26 -0600
Subject: Re: Ski Size
--> Kitfox-List message posted by: "R.D.(Ron) Leclerc"
Hey Lynn and Pat this link is from a 701 builder with some
home built skis on Yahoo, and here are a couple of
messages... this is what he had to say:
"hi all took some time but the new skis are installed and
tested perfectly this past weekend. performed very well on
the snow which b/c of the recent thaw surface was very dense
and hard. i can pull the plane with one finger on prop on top
of this stuff. because of the cant in the main gear the outer
edge of the ski is lower then i would like but still
performed very well on the grass.all skis are 15" wide mains
are 48" long and nw is 36" top speed was down about 5mph and
is noticable less responsive to full throttle up. A mushy
4ooo rpm to 5200 in flight, the engine responds like normal
but the asi is a little slower to catch up. climbout was
still impressive as ever. total weight of all hardware is 60
lbs. so not so good for passenger carrying but at least spent
2hours sipping around doing t & g's with the bunch of hanger
buddies only able to watch from the snowbanks. will post some
pics soon but will look like carbon copies of the ones listed
at zenith."
"just uploaded some photos. mains are 14 x 48 x 1/8 alum
sheet with a 3.5" incline. 2- 1 x 2" rails on 12" centers
stitch welded with a 15 " wide sheet of 1/8 uhmw popriveted
to bottoms. an bolts for mounting hardware and clips. rest of
the cable, bungii and hardware is local building material.
the nw pivot is a shouldered bushing machined to size witha
5/16 x 2 an bolt and locknut. the "s" brace is a just in case
support. I can remove the ski without touching the nw axle.
tail wheels are hockey pucks board and oilite bushings
pressed into."
http://groups.yahoo.com/group/701builders/photos/album/995817052/pic/l
ist
Let me know if you can access this link, there are some pics
there of the skis... R.D.(Ron) Leclerc CH701 Plans(Scrap)
Builder #7-6699 Porsche Power Geared Redrive Winnipeg, MB
Canada infow(at)mts.net 3/2/2009 7:56:49 PM
--> Kitfox-List message posted by: Lynn Matteson
Hi Pat-
Mine are about 600 sq inches each. I measured a Cub that
turned out to be 768 sq in for the pair, and another pair for
a Cub...Federals...that measured 1008 sq in for the pair. So
mine are a bit oversize, but work very well in 12-14" of
snow. Narrow skis seem to work better in hard snow, and wider
are better for lighter snow, it seems.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 2, 2009, at 5:41 PM, Pat Reilly wrote:
Lynn Matteson, Looking at snowboards to convert to skis. What
length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
===================================
_-
==========
contribution_-
===================================
= - The Kitfox-List Email Forum -
http://www.matronics.com/Navigator?Kitfox-List
= - MATRONICS WEB FORUMS -
your generous support!
->
http://ww Archive Search & Download, 7-Day Browse, Chat, FAQ,
===
_-
= - The Kitfox-List Email:-( Features Navigator to Archive Search & Download, 7-Day
> http://www.matronics.:-( -
MATRONICS WEB FORUMS -->
-
List Contribution:-( http://www.matronics.com/contribution _-
============================================================
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
| Description: |
|
| Filesize: |
72.79 KB |
| Viewed: |
10428 Time(s) |
|
| Description: |
|
| Filesize: |
29.67 KB |
| Viewed: |
10428 Time(s) |
|
| Description: |
|
| Filesize: |
38.1 KB |
| Viewed: |
10428 Time(s) |
|
|
|
| Back to top |
|
|
Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
| Posted: Tue Mar 03, 2009 5:47 am Post subject: Ski Size |
|
|
The photos and text came through loud and clear, Ron, and thanks.
His skis are similar to my old ones, in that they let the tire
penetrate (in my opinion) too far, and he has the "cheese slicer"
effect going for (against) him. I can't imagine this arrangement
weighing 60 lbs, either, but it DOES include a nosewheel ski, which I
don't have the equivalent of for my tailwheel....haven't found the
need for it yet.
No need for skis around here...Lower Michigan....as the ground is
clear of snow, but it's 3 degrees F. above zero, clear as a bell and
wind-less, and I'm gonna go fly some lakes!
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 2, 2009, at 10:23 PM, R.D.(Ron) Leclerc wrote:
| Quote: | Let me know if this works...
Ron
<kau03y1ven8r4w7ebnlt>
<76a4ovan2d8qbizff2h3>
<38fieofllxwituveings>
Ron, I couldn't open the photos.
do not archive
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
| Back to top |
|
|
patreilly43(at)hotmail.co
Guest
|
|
| Back to top |
|
|
akflyer
Joined: 07 May 2007
Posts: 574
Location: Soldotna AK
|
| Posted: Tue Mar 03, 2009 9:58 am Post subject: Re: Ski Size |
|
|
[quote="patreilly43(at)hotmail.co"]Lynn Matteson, Looking at snowboards to convert to skis. What length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
ohh caa caa... here we go again lol... What are the average snow depths? mine have 780 sq. in. and I would not want any less for the snow I fly off of most of the time. I had them in knee deep powder and they performed great. Only sunk in about 4 inches or so. Now to make a tail ski and I will be golden.
Snakeman
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
DO NOT ARCHIVE
Leonard Perry aka SNAKE
Soldotna AK
Avid "C" / Mk IV
582 (147 hrs and counting on the rebuild)
IVO IFA
Full Lotus 1450
#1 snake oil salesman since 1-22-2009
I would rather die trying to live, than to live trying not to die.... |
|
| Back to top |
|
|
Float Flyr
Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland
|
| Posted: Tue Mar 03, 2009 1:10 pm Post subject: Ski Size |
|
|
Lynn:
We had 11C ~ 51F temps here today. Ceiling was minimal with several rain
showers. We lost over a foot of snow today but more to go yet.
Noel
--
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats |
|
| Back to top |
|
|
Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
| Posted: Tue Mar 03, 2009 2:02 pm Post subject: Ski Size |
|
|
I don't think those are carpet.....they look like paver blocks to me,
Pat. Look closer and you'll see that where the diamond pattern is,
there is no ski attached to the hanging brackets. And these aren't
Ron's skis....he was just posting the link.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
do not archive
On Mar 3, 2009, at 10:01 AM, patrick reilly wrote:
| Quote: | Ron, Yes, photos are great. It looks like you put carpeet on the
tops of the skis. There is a diamond pattern on thetop of the ski.
What is that?
do not archive
Pat Reilly
Mod 3 582 Rebuild
Rockford, IL
From: infow(at)mts.net
To: kitfox-list(at)matronics.com
Date: Mon, 2 Mar 2009 21:23:37 -0600
Subject: RE: Ski Size
Let me know if this works...
Ron
<kau03y1ven8r4w7ebnlt>
<76a4ovan2d8qbizff2h3>
<38fieofllxwituveings>
Ron, I couldn't open the photos.
do not archive
Pat Reilly
Mod 3 582 Rebuild
Rockford, IL
From: infow(at)mts.net
To: kitfox-list(at)matronics.com
Date: Mon, 2 Mar 2009 20:38:26 -0600
Subject: Re: Ski Size
Hey Lynn and Pat this link is from a 701 builder with some
home built skis on Yahoo, and here are a couple of
messages... this is what he had to say:
"hi all took some time but the new skis are installed and
tested perfectly this past weekend. performed very well on
the snow which b/c of the recent thaw surface was very dense
and hard. i can pull the plane with one finger on prop on top
of this stuff. because of the cant in the main gear the outer
edge of the ski is lower then i would like but still
performed very well on the grass.all skis are 15" wide mains
are 48" long and nw is 36" top speed was down about 5mph and
is noticable less responsive to full throttle up. A mushy
4ooo rpm to 5200 in flight, the engine responds like normal
but the asi is a little slower to catch up. climbout was
still impressive as ever. total weight of all hardware is 60
lbs. so not so good for passenger carrying but at least spent
2hours sipping around doing t & g's with the bunch of hanger
buddies only able to watch from the snowbanks. will post some
pics soon but will look like carbon copies of the ones listed
at zenith."
"just uploaded some photos. mains are 14 x 48 x 1/8 alum
sheet with a 3.5" incline. 2- 1 x 2" rails on 12" centers
stitch welded with a 15 " wide sheet of 1/8 uhmw popriveted
to bottoms. an bolts for mounting hardware and clips. rest of
the cable, bungii and hardware is local building material.
the nw pivot is a shouldered bushing machined to size witha
5/16 x 2 an bolt and locknut. the "s" brace is a just in case
support. I can remove the ski without touching the nw axle.
tail wheels are hockey pucks board and oilite bushings
pressed into."
http://groups.yahoo.com/group/701builders/photos/album/
995817052/pic/l
ist
Let me know if you can access this link, there are some pics
there of the skis... R.D.(Ron) Leclerc CH701 Plans(Scrap)
Builder #7-6699 Porsche Power Geared Redrive Winnipeg, MB
Canada infow(at)mts.net 3/2/2009 7:56:49 PM
Hi Pat-
Mine are about 600 sq inches each. I measured a Cub that
turned out to be 768 sq in for the pair, and another pair for
a Cub...Federals...that measured 1008 sq in for the pair. So
mine are a bit oversize, but work very well in 12-14" of
snow. Narrow skis seem to work better in hard snow, and wider
are better for lighter snow, it seems.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 605 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 2, 2009, at 5:41 PM, Pat Reilly wrote:
Lynn Matteson, Looking at snowboards to convert to skis. What
length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford,IL
==========
_-
==========
contribution_-
==========
= - The Kitfox-List Email Forum -
http://www.matronics.com/Navigator?Kitfox-List
= - MATRONICS WEB FORUMS -
your generous support!
->
http://ww Archive Search & Download, 7-Day Browse, Chat, FAQ,
===
_-
= - The Kitfox-List Email
Features Navigator to Archive Search & Download, 7-Day
> http://www.matronics.
-
MATRONICS WEB FORUMS -->
-
List Contribution
==========
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
| Back to top |
|
|
patreilly43(at)hotmail.co
Guest
|
| Posted: Tue Mar 03, 2009 2:34 pm Post subject: Ski Size |
|
|
Len C We don't have knee deep powder. Never! As a matter of fact we don't have powder period. I'm shooting for 600 sq " per ski. But thanks for info.
Pat Reilly
Mod 3 582 Rebuild
Rockford C IL
| Quote: | Subject: Re: Ski Size
From: akflyer_2000(at)yahoo.com
Date: Tue C 3 Mar 2009 09:58:48 -0800
To: kitfox-list(at)matronics.com
--> Kitfox-List message posted by: "akflyer" <akflyer_2000(at)yahoo.com>
[quote="patreilly43(at)hotmail.co"]Lynn Matteson C Looking at snowboards to convert to skis. What length and sq ' or " footprint do I need?
Pat Reilly
Mod 3 582 Rebuild
Rockford CIL
> [b]
ohh caa caa... here we go again lol... What are the average snow depths? mine have 780 sq. in. and I would not want any less for the snow I fly off of most of the time. I had them in knee deep powder and they performed great. Only sunk in about 4 inches or so. Now to make a tail ski and I will be golden.
Snakeman
--------
DO NOT ARCHIVE
Leonard Perry aka SNAKE
Soldotna AK
Avid "C" / Mk IV
582 IVO IFA
Full Lotus 1260
#1 snake oil salesman since 1-22-2009
hander outer of humorless darwin awards
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=232974#232974
&=======================
|
&g============
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
patreilly43(at)hotmail.co
Guest
|
|
| Back to top |
|
|
Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
| Posted: Tue Mar 03, 2009 3:46 pm Post subject: Ski Size |
|
|
When I was digging into ski sizes, it *seemed* that all the skis that
I measured were built under the assumption of about 1-2 pounds of
airplane weight per square inch of ski. That's a wild --- guess, but
again, deep powdery snow requires more flotation/area, and hard-
packed snow needs less area, at least from what I've been able to
gather.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 610 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 3, 2009, at 5:33 PM, patrick reilly wrote:
| Quote: | Len, We don't have knee deep powder. Never! As a matter of fact we
don't have powder period. I'm shooting for 600 sq " per ski. But
thanks for info.
Pat Reilly
Mod 3 582 Rebuild
Rockford, IL
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
| Back to top |
|
|
patreilly43(at)hotmail.co
Guest
|
| Posted: Wed Mar 04, 2009 6:42 am Post subject: Ski Size |
|
|
Lynn C Don't know if you are a skier C but that applies to downhill skiing also. Powder skies are much wider than carving skies.
do not archive
Pat Reilly
Mod 3 582 Rebuild
Rockford C IL
| Quote: | From: lynnmatt(at)jps.net
Subject: Re: Kitfox-List: Re: Ski Size
Date: Tue C 3 Mar 2009 18:45:33 -0500
To: kitfox-list(at)matronics.com
--> Kitfox-List message posted by: Lynn Matteson <lynnmatt(at)jps.net>
When I was digging into ski sizes C it *seemed* that all the skis that
I measured were built under the assumption of about 1-2 pounds of
airplane weight per square inch of ski. That's a wild --- guess C but
again C deep powdery snow requires more flotation/area C and hard-
packed snow needs less area C at least from what I've been able to
gather.
Lynn Matteson
Kitfox IV Speedster C taildragger
Jabiru 2200 C #2062 C 610 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
On Mar 3 C 2009 C at 5:33 PM C patrick reilly wrote:
> Len C We don't have knee deep powder. Never! As a matter of fact we
> don't have powder period. I'm shooting for 600 sq " per ski. But
> thanks for info.
>
> Pat Reilly
> Mod 3 582 Rebuil= Archive Search & Download C 7-Day Browse C Chat C FAQ C
&g====
|
[quote]
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
| Posted: Wed Mar 04, 2009 11:42 am Post subject: Ski Size |
|
|
I haven't skied in 20 years, and haven't kept up with that sport, but
what you say sounds right.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 610 hrs
Sensenich 62x46
Electroair direct-fire ignition system
Status: flying
do not archive
On Mar 4, 2009, at 9:40 AM, patrick reilly wrote:
| Quote: | Lynn, Don't know if you are a skier, but that applies to downhill
skiing also. Powder skies are much wider than carving skies.
do not archive
Pat Reilly
Mod 3 582 Rebuild
Rockford, IL
> From: lynnmatt(at)jps.net
> Subject: Re: Re: Ski Size
> Date: Tue, 3 Mar 2009 18:45:33 -0500
> To: kitfox-list(at)matronics.com
>
>
>
> When I was digging into ski sizes, it *seemed* that all the skis
that
> I measured were built under the assumption of about 1-2 pounds of
> airplane weight per square inch of ski. That's a wild --- guess, but
> again, deep powdery snow requires more flotation/area, and hard-
> packed snow needs less area, at least from what I've been able to
> gather.
>
> Lynn Matteson
> Kitfox IV Speedster, taildragger
> Jabiru 2200, #2062, 610 hrs
> Sensenich 62x46
> Electroair direct-fire ignition system
> Status: flying
>
>
>
>
> On Mar 3, 2009, at 5:33 PM, patrick reilly wrote:
>
> > Len, We don't have knee deep powder. Never! As a matter of fact we
> > don't have powder period. I'm shooting for 600 sq " per ski. But
> > thanks for info.
> >
> > Pat Reilly
> > Mod 3 582 Rebuil= Archive Search & Download, 7-Day Browse,
Chat, FAQ,
&g====
>
>
>
============================================================ _-
============================================================ _-
contribution_-
============================================================
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
| Back to top |
|
|
dashwood
Joined: 24 Jan 2009
Posts: 73
Location: sw ontario canada
|
| Posted: Wed Mar 04, 2009 7:13 pm Post subject: Re: Ski Size |
|
|
hello lynn: its odd that you guys are talking about my skis. i got some of my inspiration from looking at the picture posts of yours. The originals idea came from robert nelson in the zenair .com posts of skis. http://www.zenithair.com/stolch701/7-photo81.html library #81...His are of the blue 701 at the top and about 2/3 down the list. I emailed him for info and he supplied me with some spec and more pics. .some others on the site show a guy standing on his skies so i got some relative sizes from that. I was just winging it as to the sizes. I just now did some calculations and came up with just under 2lb /sq in at full load. The pictures are just after traversing a 6' deep snowdrift. The plane sank about 8" but was able to hold the nw higher with rpm and backstick. I walked back through the same drift and sank past my knees. My size 12'vs couldnt hold up the 200lb hulk.there is a fair amout to cheese slicing and the wheels protrude about 2". the home field is grass with many short hops to pavement so i wanted both.
yes the other pic is of the nw ski under construction detailing the machined pivot separate from the nw axle....including pavers in the hanger
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
Last edited by dashwood on Sun Dec 06, 2009 7:56 pm; edited 1 time in total |
|
| Back to top |
|
|
ruebd(at)skymail.csus.edu
Guest
|
| Posted: Thu Mar 05, 2009 8:30 am Post subject: Ski Size |
|
|
Everyone knows size matters!
--
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
