|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
emrath(at)comcast.net Guest
|
Posted: Thu Mar 12, 2009 6:04 am Post subject: AeroElectric-List Digest: 9 Msgs - 03/11/09 |
|
|
I appreciate the replies from David and Bill. Yes this is the XM antenna
and there is no magnet in my version of this antenna. There are two small
holes for mounting but a 4-40 cross threads in the hole after a turn to 1.5
turns. So what I need must be metric about the same size as a 4-40 in dia.
but with different TPI. I am not concerned with using this is a "buddy's"
plane at this time, but it would not be too hard to modify the mounting
later as I can get to my glare shield underside rather easy to unscrew these
little buggers.
Marty
Time: 01:58:48 PM PST US
From: "Emrath" <emrath(at)comcast.net>
Subject: Garmin weather antenna
I have a Garmin Weather antenna for my GPSMAP 496 which I would like to
mount on top of my panel. There are two threaded holes in the back of the
antenna to be able to bolt this to the 'dash'. Does anyone know what size
screws are required to do this, I cannot seem to find any reference in my
materials about this.
Marty
________________________________ Message 6
_____________________________________
Time: 02:37:16 PM PST US
From: "David LLoyd" <skywagon(at)charter.net>
Subject: Re: Garmin weather antenna
Marty,
Do you know if your weather antenna is the model that has the ring magnet on
the bottom...?
If so, you may not want to mount it to the panel top if you have a compass
near by.
Also, you may not want to permanently mount it in case you want to take the
antenna with you to hook up to another Garmin in a buddy's plane. There is a
procedure for removing the magnet if it is not desired. Some of
us have mounted the antenna high up and out of the way in the front window
frame area using an "L" shaped bracket. The 2 screws holding it can be
quickly removed in the case where you want to use the antenna in another
aircraft.
.....2 cents of comment....
David
________________________________ Message 8
_____________________________________
Time: 07:11:26 PM PST US
From: "Bill Hibbing" <n744bh(at)bellsouth.net>
Subject: Re: Garmin weather antenna
I have a 396 and if the antenna you're talking about is for the XM weather
I'm pretty sure that the screws are 4-40. What I did to make it easy to
remove the antenna was cut the head off the screw and then sharpen it up a
little. I then drilled holes in the top of the glareshield using the
mounted screws to mark the spot to drill and set the antenna with screws
attached into the holes. I've been using it this way for a couple of years
now and have never had a problem of the antenna coming off the glareshield
in turbulence. Oh yeah, I used as small a drill as possible so that the fit
was fairly snug.
Bill
Glasair SIIS-FT
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
ftyoder(at)yoderbuilt.com Guest
|
Posted: Thu Mar 12, 2009 8:57 am Post subject: AeroElectric-List Digest: 9 Msgs - 03/11/09 |
|
|
I just use a little hook and loop stuff. ( Velcro )
Tim
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|