Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Parts for sale

Matronics Email Lists Forum Index -> M14PEngines-List

View previous topic :: View next topic

Author Message

doug(at)ripleyair.com
Guest

Posted: Thu Jul 17, 2008 10:06 am Post subject: Parts for sale

I have the following M-14 parts available for  sale.  Please email off-list for photos and details:

  

 Stainless exhaust, complete with heat muff, great  condition

 V-3500 prop, time unkown, operating fine when  removed

 Filtered air box with carb heat door

 Aluminum cowling with ring for M-14, the rest fits  Lockheed AL-60, great condition

 Air start tank

 Oil cooler

  

 All of these parts were removed from flying AL-60,  engine will be used for Pitts and I will not be using these parts.

  

 Doug Ripley

  

  

   [quote][b]

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Fri Mar 13, 2009 12:06 pm Post subject: Re: Parts for sale

Hi



How much did you want for the carb heat box, and where are you located, I am in eastern Canada



Henry

_________________
Currently building a Murphy Moose - any help would be appreciated.

doug(at)ripleyair.com
Guest

Posted: Sat Mar 14, 2009 3:47 am Post subject: Parts for sale

I'll take $50 for it, you pay shipping.



I'm in the Atlanta area.  Any chance you're going to Sun-N-Fun?



Doug

404-403-9208

www.ripleyair.com



---

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Sat Mar 14, 2009 4:03 pm Post subject: Re: Parts for sale

Hi Doug



That sounds fine , I'll be in touch



Henry

_________________
Currently building a Murphy Moose - any help would be appreciated.

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Sun Mar 29, 2009 6:40 pm Post subject: Re: Parts for sale

Hi Doug



I'm ready for the filtered air box how do you want to get paid just let me Know.



My address is P.O. Box 318, 149 Water St Botwood NL AOH 1EO Canada



Cheers Henry



Buy the way the manifold drain lines work perfectly.



Henry

_________________
Currently building a Murphy Moose - any help would be appreciated.

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Mon Mar 30, 2009 5:15 pm Post subject: Re: Parts for sale

Hi Doug



Small world , I had bought a aluminum cowl from Dan Horton, he is great to deal with. That will be fine, send the part and I'll send you the check what ever is best for you. I could even wire you the money if you want.



Thanks again



Henry



 Moose 294

_________________
Currently building a Murphy Moose - any help would be appreciated.

eddiemoranii(at)yahoo.com
Guest

Posted: Tue Mar 31, 2009 1:04 pm Post subject: Parts for sale

Henry, Hi.....  Exciting to hear of another Moose being built.



I have a set of smoked bubble windows.



Eddie Moran.



--- On Mon, 3/30/09, HBaker <henry.baker(at)nf.sympatico.ca> wrote:

[quote]

From: HBaker <henry.baker(at)nf.sympatico.ca>

Subject: Re: Parts for sale

To: m14pengines-list(at)matronics.com

Date: Monday, March 30, 2009, 9:15 PM



--> M14PEngines-List message posted by: "HBaker" <[url=/mc/compose?to=henry.baker(at)nf.sympatico.ca]henry.baker(at)nf.sympatico.ca[/url]>



Hi Doug



Small world , I had bought a aluminum cowl from Dan Horton, he is great to deal with. That will be fine, send the part and  I'll send you the check what ever is best for you. I could even wire you the money if you want.



Thanks again



Henry



 Moose 294



--------

Currently building a Murphy Moose - any help would be appreciated.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=236964#236964



vigator?M14PEngines-List"  target="_blank">http://www.matronics.com/Navigator?M14PEngines-List<  --> 

         [quote][b]

cattoni(at)glastar.ca
Guest

Posted: Tue Mar 31, 2009 1:53 pm Post subject: Parts for sale

Hi  Eddie,

  

 I am an other  Moose builder. A friend of mine and I are working together . We are in  Kelowna BC , Day after tomorrow, we start with the engine installation  .

 It is nice to  know, that other builders are around for help . Murphy is not the best source  for information's anymore .

  

 Would you  mind, giving me your mail address , so that I could contact you of the web ?  That would be awesome . Where are you living ?

 Are you  already flying ? If yes, what engine - propeller combination did you go with  ?

 We are right  at the state to choose the propeller . We got a westernized M14PF , that is the  one which is supposed to put 400 HP out.

  

 I would love  to hear from you,

  

 Have a great  day,

  

 With  Regards,

  

 Peter

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 [quote]   

   --

dstroud(at)xplornet.com
Guest

Posted: Tue Mar 31, 2009 2:41 pm Post subject: Parts for sale

Peter....can you offer advice on the fuel debubbler ? Is  it just a stock thing on a certified

 Yak or Nanchang and not used on the homebuilt end of  things ? Thanks...

  

 David Stroud     Ottawa,  Canada

Christavia C-FDWS

Fairchild 51 replica

under  construction  C-FYXV

 [quote]   ---

cattoni(at)glastar.ca
Guest

Posted: Tue Mar 31, 2009 3:42 pm Post subject: Parts for sale

Hi  David,

  

 I am sorry,  can not help you there .

 Regards,  Peter

 [quote]   

   --

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Tue Mar 31, 2009 5:45 pm Post subject: Re: Parts for sale

Hi Guys 



If It  wasn't  for the guys  who put the pics on the website, Go fly a Moose I would have been lost , as I am from Newfoundland Canada and there isn't any other moose projects  I can go look at,  and we all know  that a  picture is worth a thousand words!!  I Have started 3 years ago and feel like I Know you all personally, Well at least Your Moose projects! Maybe we can get some updates or more moose projects. 

 Ed I have already installed the windows, but I will keep you in mind.

Thanks ever so much!



Henry

_________________
Currently building a Murphy Moose - any help would be appreciated.

doug(at)ripleyair.com
Guest

Posted: Wed Apr 01, 2009 3:59 am Post subject: Parts for sale

I have a fiberglass headliner and side panel set for the Moose, un-used and 

not yet fitted.  We decided not to use it in Rick's Turbine Moose.  Anyone 

interested please contact me off list.



Thanks!

Doug Ripley



---

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Fri May 01, 2009 12:36 pm Post subject: Re: Parts for sale

Hi Doug

Just mark the package  "aircraft parts " when you send it , and put a value of 20 bucks on it . My telephone # is 709 257 3749



Thanks again

_________________
Currently building a Murphy Moose - any help would be appreciated.

cattoni(at)glastar.ca
Guest

Posted: Fri May 01, 2009 5:56 pm Post subject: Parts for sale

Hi all,



I building a Murphy Moose together with a friend of mine. We just hang

the engine to the firewall M14PF . We got an oil tank , from a  Sukoi I

believe. But he realized soon, that this one will not fit behind our

engine mount. So I guess we have to get one made up for us.



It would be very helpful, if we could get some ideas, dos and don'ts

,especially of the oil tank installation and generally ,of all  firewall

forward installations .   Some pictures would be helpful, and we are

grateful for any advice we can get .

All help is appreciated .

TIA



Peter Cattoni   Kelowna BC Canada

--

westcoastkitplanes(at)gma
Guest

Posted: Fri May 01, 2009 6:58 pm Post subject: Parts for sale

Hi Peter,



I know Murphy used to have metal oil tanks, but I saw an oil tank made from aluminum on their web site (that is when they showed some of the accessories you could buy).



Jeff

 On Fri, May 1, 2009 at 6:56 PM, Peter Cattoni <cattoni(at)glastar.ca (cattoni(at)glastar.ca)> wrote:

[quote] --> M14PEngines-List message posted by: "Peter Cattoni" <cattoni(at)glastar.ca (cattoni(at)glastar.ca)>

 

 Hi all,

 

 I building a Murphy Moose together with a friend of mine. We just hang

 the engine to the firewall M14PF . We got an oil tank , from a  Sukoi I

 believe. But he realized soon, that this one will not fit behind our

 engine mount. So I guess we have to get one made up for us.

 

 It would be very helpful, if we could get some ideas, dos and don'ts

 ,especially of the oil tank installation and generally ,of all  firewall

 forward installations .   Some pictures would be helpful, and we are

 grateful for any advice we can get .

 All help is appreciated .

 TIA

 

 Peter Cattoni   Kelowna BC Canada

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 --

eddiemoranii(at)yahoo.com
Guest

Posted: Sat May 02, 2009 6:12 am Post subject: Parts for sale

Peter, I used a used header tank from an offshore racing boat.  I bought it on ebay.  Remember, the oil tank on your Moose does not need to provide oil while inverted.



Eddie Moran



--- On Fri, 5/1/09, Peter Cattoni <cattoni(at)glastar.ca> wrote:

[quote]

From: Peter Cattoni <cattoni(at)glastar.ca>

Subject: RE: Re: Parts for sale

To: m14pengines-list(at)matronics.com

Date: Friday, May 1, 2009, 9:56 PM



--> M14PEngines-List message posted by: "Peter Cattoni" <[url=/mc/compose?to=cattoni(at)glastar.ca]cattoni(at)glastar.ca[/url]>



Hi all,



I building a Murphy Moose together with  a friend of mine. We just hang

the engine to the firewall M14PF . We got an oil tank , from a  Sukoi I

believe. But he realized soon, that this one will not fit behind our

engine mount. So I guess we have to get one made up for us.



It would be very helpful, if we could get some ideas, dos and don'ts

,especially of the oil tank installation and generally ,of all  firewall

forward installations .   Some pictures would be helpful, and we are

grateful for any advice we can get .

All help is appreciated .

TIA



Peter Cattoni   Kelowna BC Canada

--

dsavarese0812(at)bellsout
Guest

Posted: Sat May 02, 2009 6:37 am Post subject: Parts for sale

Given the fact that it doesn't need to be an oil tank with  inverted capability, I wonder if the oil tank used on a CJ would work?   It's a bit narrower than the round tank used on the 50 or 52 and sort of an egg  shape with the smaller end of the "egg" at the bottom of the tank.  Check  with Doug Sapp for dimensions.

 Dennis

 [quote]   ---

eddiemoranii(at)yahoo.com
Guest

Posted: Sat May 02, 2009 9:34 am Post subject: Parts for sale

Peter, look at this web site.  It gives you the idea of tanks that can be used.  Lightweight tanks for racing.  Some are dry sump tanks, some are overflow H2O tanks.  



http://www.petersonfluidsys.com/tanks.html



Eddie



--- On Fri, 5/1/09, Peter Cattoni <cattoni(at)glastar.ca> wrote:

[quote]

From: Peter Cattoni <cattoni(at)glastar.ca>

Subject: RE: Re: Parts for sale

To: m14pengines-list(at)matronics.com

Date: Friday, May 1, 2009, 9:56 PM



--> M14PEngines-List message posted by: "Peter Cattoni" <[url=/mc/compose?to=cattoni(at)glastar.ca]cattoni(at)glastar.ca[/url]>



Hi all,



I building a Murphy  Moose together with a friend of mine. We just hang

the engine to the firewall M14PF . We got an oil tank , from a  Sukoi I

believe. But he realized soon, that this one will not fit behind our

engine mount. So I guess we have to get one made up for us.



It would be very helpful, if we could get some ideas, dos and don'ts

,especially of the oil tank installation and generally ,of all  firewall

forward installations .   Some pictures would be helpful, and we are

grateful for any advice we can get .

All help is appreciated .

TIA



Peter Cattoni   Kelowna BC Canada

--

HBaker

Joined: 16 Nov 2008
Posts: 119

Posted: Sat May 02, 2009 1:14 pm Post subject: Re: Parts for sale

Peter 

I have sent you a pic of my oil tank, just remember that I mounted my tank a little high, so I could have better access to the dipstick when the cowl goes on, the top brackets should have been bolted in the horizontal channel, so  I  had to make doublers for all the brackets. If you need any more pics let me know.



Henry

_________________
Currently building a Murphy Moose - any help would be appreciated.

cattoni(at)glastar.ca
Guest

Posted: Sat May 02, 2009 3:42 pm Post subject: Parts for sale

Hi Henry,



That is great stuff, thank you a lot !

Would you have the dimensions of the tank handy ? Did you have it made

for you ? You do not have the specifications for it .



I hope I do not ask to many questions. But it would be really helpful ,

if we had a few more details, so that I can go to our welder, and have

one made up for us.



Yes I agree, the attachment flanges would go nicely on the re

enforcement brackets on the fire wall.



For now, thank you so much,



Peter

--

Display posts from previous:

	Matronics Email Lists Forum Index -> M14PEngines-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum