Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

D-100 Shield

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

naumuk(at)windstream.net
Guest

Posted: Sat Mar 14, 2009 5:07 pm Post subject: D-100 Shield

All-

     Where does the shield for the  D-100 computer and remote compass 9 pin connectors terminate? Also, someone  refered to the Dynon user's site. What's the address?

     Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair  95%

   [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Ron Lendon

Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

Posted: Sat Mar 14, 2009 6:36 pm Post subject: Re: D-100 Shield

http://www.dynonavionics.com/docs/support_documentation.html



http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/

naumuk(at)windstream.net
Guest

Posted: Sat Mar 14, 2009 6:47 pm Post subject: D-100 Shield

Sabrina-

    According to page 3-3 of the Dynon manual, they're supposed to go "To 

the short black/white cable emanating from the DB25". From past practice I 

would have soldered the shield to the DB25 case, but I suppose the ground 

block will do just as well.

                                                                             

            Bill

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

craig(at)craigandjean.com
Guest

Posted: Sat Mar 14, 2009 9:01 pm Post subject: D-100 Shield

If it is the actual shield (foil or braided wire tube surrounding the wire bundle) as opposed to a ground wire then it should be connected to the metal shell of the D connector at one end (probably the D-100) (assuming the metal shell on the D-100 is connected to ground. If not connect it to the ground pin at the D-100 end.  

   

I think I mentioned the user’s group. I was referring to the user’s forum on the Dynon web site.  

   

-- Craig  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Bill Naumuk

 Sent: Saturday, March 14, 2009 7:07 PM

 To: zenith list

 Subject: D-100 Shield  

  

  

     

All-  

    

    Where does the shield for the D-100 computer and remote compass 9 pin connectors terminate? Also, someone refered to the Dynon user's site. What's the address?  

    

    Thanks.  

    

Bill Naumuk

 Townville, Pa.

 HDS 601MG/Corvair 95%  

   	  Quote: 	
		    http://www.matronics.com/Navigator?Zenith-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

       [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

naumuk(at)windstream.net
Guest

Posted: Sun Mar 15, 2009 7:05 am Post subject: D-100 Shield

Craig+Ron-

     Ron provided the link and I  found the exact same question posted by an RV6er. I have to do some more  navigation to find the answer, but have to break for a hardware store run before  they close. Thanks, guys. A200 and G196 connected and powered up.

                                                                                          Bill

                                                Do not archive

 [quote]   ---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum