Matronics Email Lists :: View topic - Scott Taliwheel for Yak 55M

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Scott Taliwheel for Yak 55M
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Sat Mar 14, 2009 4:36 pm Post subject: Scott Taliwheel for Yak 55M

Has anyone had experience installing a Scott tailwheel on a Yak 55M?  If so, is there any special fabrication I need to be aware of?



Thanks,



Anthony.

  [quote][b]

scott-p(at)texas.net
Guest

Posted: Sat Mar 14, 2009 6:21 pm Post subject: Scott Taliwheel for Yak 55M

Hi Anthony,



I have a Scott 3200 on my 55M. I love it. MUCH superior to the Russian 

tail wheel, especially as regards pushing and pulling and steering 

into/out of the hangar. Plus if an FBO has any tailwheel tires/tubes, 

they have that one.



You will need to fab an adapter plate to adapt the Russian tailwheel 

spring to the Scott bolt pattern. I will be out at my hangar on Monday 

(unfortunately have to work tomorrow, and didn't get this until afte I 

came back for today...) and will shoot you a couple of pictures. It is 

appears to be a pretty straightforward machining job, so it shouldn't be 

a big deal to find a shop that can do it.



Good luck,



Scott Poehlmann

Yak 55M N155YK



Yak 55M wrote:

 	  Quote: 	
		   Has anyone had experience installing a Scott tailwheel on a Yak 55M?  

 If so, is there any special fabrication I need to be aware of?



 Thanks,



 Anthony.

 *

 *

drc(at)wscare.com
Guest

Posted: Sat Mar 14, 2009 9:01 pm Post subject: Scott Taliwheel for Yak 55M

If you could copy me on the pictures also.

Thanks

Herb Coussons

drc(at)wscare.com

On Mar 14, 2009, at 9:19 PM, Scott Poehlmann wrote:

 	  Quote: 	

 Hi Anthony,

 I have a Scott 3200 on my 55M. I love it. MUCH superior to the  

 Russian tail wheel, especially as regards pushing and pulling and  

 steering into/out of the hangar. Plus if an FBO has any tailwheel  

 tires/tubes, they have that one.

 You will need to fab an adapter plate to adapt the Russian tailwheel  

 spring to the Scott bolt pattern. I will be out at my hangar on  

 Monday (unfortunately have to work tomorrow, and didn't get this  

 until afte I came back for today...) and will shoot you a couple of  

 pictures. It is appears to be a pretty straightforward machining  

 job, so it shouldn't be a big deal to find a shop that can do it.

 Good luck,

 Scott Poehlmann

 Yak 55M N155YK

 Yak 55M wrote:

> Has anyone had experience installing a Scott tailwheel on a Yak  

> 55M?  If so, is there any special fabrication I need to be aware of?

>

> Thanks,

>

> Anthony.

> *

> *

warner.wesley(at)gmail.co
Guest

Posted: Sun Mar 15, 2009 7:48 am Post subject: Scott Taliwheel for Yak 55M

Here are some pics of the assembly I had made.  It bolts up underneath

the spring just like the original, using the the original holes,

etc...  I had a bunch made.  I'm not sure if the guy has any left

over.  I could check if you're interested.  I don't recall the cost

exactly, but I know they weren't cheap.



On Sat, Mar 14, 2009 at 8:35 PM, Yak 55M <yak55m(at)gmail.com> wrote:

 	  Quote: 	
		   Has anyone had experience installing a Scott tailwheel on a Yak 55M?  If so,

 is there any special fabrication I need to be aware of?



 Thanks,



 Anthony.

============
	


============

============

============

 	  Quote:

2004-03-22_001.JPG

Description:

Filesize:

194.72 KB

Viewed:

14182 Time(s)

2004-03-22_002.JPG

Description:

Filesize:

207.75 KB

Viewed:

14182 Time(s)

2004-03-22_003.JPG

Description:

Filesize:

204.22 KB

Viewed:

14182 Time(s)

talew(at)bellsouth.net
Guest

Posted: Sun Mar 15, 2009 8:06 am Post subject: Scott Taliwheel for Yak 55M

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Sun Mar 15, 2009 6:09 pm Post subject: Scott Taliwheel for Yak 55M

Hi Wesley,



thanks for the info and photos, this is very helpful.  If there are any leftovers from the original run, I would be very interested in purchasing one.  



Thanks,



Anthony.



 On Sun, Mar 15, 2009 at 8:47 AM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

[quote] Here are some pics of the assembly I had made.  It bolts up underneath

 the spring just like the original, using the the original holes,

 etc...  I had a bunch made.  I'm not sure if the guy has any left

 over.  I could check if you're interested.  I don't recall the cost

 exactly, but I know they weren't cheap.

 

 On Sat, Mar 14, 2009 at 8:35 PM, Yak 55M <yak55m(at)gmail.com (yak55m(at)gmail.com)> wrote:

 > Has anyone had experience installing a Scott tailwheel on a Yak 55M?  If so,

 > is there any special fabrication I need to be aware of?

 >

 > Thanks,

 >

 > Anthony.

 >

 >

 

============

 ============

 ============

 ============

 >

 >

 [b]

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Sun Mar 15, 2009 6:10 pm Post subject: Scott Taliwheel for Yak 55M

Thanks Scott,



that is exactly what I am hoping to use on my airplane.  Photos would be a great help.



Regards,



Anthony.



On Sat, Mar 14, 2009 at 7:19 PM, Scott Poehlmann <scott-p(at)texas.net (scott-p(at)texas.net)> wrote:

 [quote]--> Yak-List message posted by: Scott Poehlmann <scott-p(at)texas.net (scott-p(at)texas.net)>

  

 Hi Anthony,

 

 I have a Scott 3200 on my 55M. I love it. MUCH superior to the Russian tail wheel, especially as regards pushing and pulling and steering into/out of the hangar. Plus if an FBO has any tailwheel tires/tubes, they have that one.

  

 You will need to fab an adapter plate to adapt the Russian tailwheel spring to the Scott bolt pattern. I will be out at my hangar on Monday (unfortunately have to work tomorrow, and didn't get this until afte I came back for today...) and will shoot you a couple of pictures. It is appears to be a pretty straightforward machining job, so it shouldn't be a big deal to find a shop that can do it.

  

 Good luck,

 

 Scott Poehlmann

 Yak 55M N155YK

 

 Yak 55M wrote:

  	  Quote: 	
		   Has anyone had experience installing a Scott tailwheel on a Yak 55M?  If so, is there any special fabrication I need to be aware of?

 

 Thanks,

 

 Anthony.

 *

 

 

 *

 	
 

 ===========

 rget="_blank">http://www.matronics.com/Navigator?Yak-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 [b]

mikspin

Joined: 12 Aug 2007
Posts: 66

Posted: Sun Mar 15, 2009 6:57 pm Post subject: Re: Scott Taliwheel for Yak 55M

Wesley,



Since you had this made, any chance you have some drawings for the piece?



Mike Hastings

warner.wesley(at)gmail.co
Guest

Posted: Sun Mar 15, 2009 8:19 pm Post subject: Scott Taliwheel for Yak 55M

I'll find out tomorrow what/if there are any more available.  The

angle is set so that it is correct if you have gear extenders

installed (I did with Clevelands).  If you don't have the extenders,

it's possible I could sell you the one that I have here.  It has the

original angle (copied from the original tailwheel).  I don't have the

model we did.  It was done at the machinists facility.  If he doesn't

have any more, I can create a new model from the one I have here.



These planes are a little tough for parts.  I had to have aileron

bushings made as well.  The availability wasn't good enough.  If you

need some of those...  I have extra sets.  The easiest way to do a

quick check is to just to try and move your aileron at the tip

vertically.  If you feel any play at all, chances are that they need

replacing.



Wes



On Sun, Mar 15, 2009 at 10:08 PM, Yak 55M <yak55m(at)gmail.com> wrote:

 	  Quote: 	
		   Hi Wesley,



 thanks for the info and photos, this is very helpful.  If there are any

 leftovers from the original run, I would be very interested in purchasing

 one.



 Thanks,

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Sun Mar 15, 2009 9:13 pm Post subject: Scott Taliwheel for Yak 55M

Thanks Wes,

the previous owner installed Grove 500x5 wheels and tires.  I don't think I have gear extenders, from what I can tell the axles are bolted directly to the base of the legs.  What do the extenders look like, and what is their purpose?  I will check my ailerons as you suggested and let you know if I need the bushings.

Regards,

Anthony.

On Sun, Mar 15, 2009 at 9:18 PM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

[quote] --> Yak-List message posted by: Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)>

 I'll find out tomorrow what/if there are any more available.  The

 angle is set so that it is correct if you have gear extenders

 installed (I did with Clevelands).  If you don't have the extenders,

 it's possible I could sell you the one that I have here.  It has the

 original angle (copied from the original tailwheel).  I don't have the

 model we did.  It was done at the machinists facility.  If he doesn't

 have any more, I can create a new model from the one I have here.

 These planes are a little tough for parts.  I had to have aileron

 bushings made as well.  The availability wasn't good enough.  If you

 need some of those...  I have extra sets.  The easiest way to do a

 quick check is to just to try and move your aileron at the tip

 vertically.  If you feel any play at all, chances are that they need

 replacing.

 Wes

 On Sun, Mar 15, 2009 at 10:08 PM, Yak 55M <yak55m(at)gmail.com (yak55m(at)gmail.com)> wrote:

 > Hi Wesley,

 >

 > thanks for the info and photos, this is very helpful.  If there are any

 > leftovers from the original run, I would be very interested in purchasing

 > one.

 >

 > Thanks,

 >

 ========================

 rget="_blank">http://www.matronics.com/Navigator?Yak-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

[b]

warner.wesley(at)gmail.co
Guest

Posted: Wed Mar 18, 2009 12:16 pm Post subject: Scott Taliwheel for Yak 55M

I'm having some issues getting in touch with the the guy I had making

them before.  Hopefully I can see him next week or so.  I thought I

had one of the prototypes here, but I guess it's not.  I should be

able to find that one next week also.



The extenders normally are just some plate material that bolts to the

landing gear holes and lowers the axles by about 3".  Most people

started using them to run the larger Whirlwind prop and still have an

adequate amount of ground clearance.



Wes



On Mon, Mar 16, 2009 at 1:12 AM, Yak 55M <yak55m(at)gmail.com> wrote:

 	  Quote: 	
		   Thanks Wes,



 the previous owner installed Grove 500x5 wheels and tires.  I don't think I

 have gear extenders, from what I can tell the axles are bolted directly to

 the base of the legs.  What do the extenders look like, and what is their

 purpose?  I will check my ailerons as you suggested and let you know if I

 need the bushings.



 Regards,



 Anthony.

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Wed Mar 18, 2009 3:35 pm Post subject: Scott Taliwheel for Yak 55M

Thanks Wes,

that makes sense.  I think I have the extenders, but I will double check.  Any chance you can provide a photo (sorry to be a pest)?  Thanks for the follow up on the adapter plate, anything would help.

Regards,

Anthony.

On Wed, Mar 18, 2009 at 1:13 PM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

 [quote]--> Yak-List message posted by: Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)>

I'm having some issues getting in touch with the the guy I had making

 them before.  Hopefully I can see him next week or so.  I thought I

 had one of the prototypes here, but I guess it's not.  I should be

 able to find that one next week also.

 The extenders normally are just some plate material that bolts to the

 landing gear holes and lowers the axles by about 3".  Most people

 started using them to run the larger Whirlwind prop and still have an

 adequate amount of ground clearance.

 Wes

 On Mon, Mar 16, 2009 at 1:12 AM, Yak 55M <yak55m(at)gmail.com (yak55m(at)gmail.com)> wrote:

 > Thanks Wes,

 >

 > the previous owner installed Grove 500x5 wheels and tires.  I don't think I

 > have gear extenders, from what I can tell the axles are bolted directly to

 > the base of the legs.  What do the extenders look like, and what is their

 > purpose?  I will check my ailerons as you suggested and let you know if I

 > need the bushings.

 >

 > Regards,

 >

 > Anthony.

 ========================

 rget="_blank">http://www.matronics.com/Navigator?Yak-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

[b]

warner.wesley(at)gmail.co
Guest

Posted: Fri Mar 20, 2009 8:28 am Post subject: Scott Taliwheel for Yak 55M

I found the one adapter I have here at home.  It was packed away.  I

have attached a pic of it.  In the picture is a gear extender as well,

so you can get an idea of what they look like.  This particular Scott

adapter is for a plane without the gear extenders.  It will work on

one with them, it's just not perfect.



Wes



On Wed, Mar 18, 2009 at 7:34 PM, Yak 55M <yak55m(at)gmail.com> wrote:

 	  Quote: 	
		   Thanks Wes,



 that makes sense.  I think I have the extenders, but I will double check.

 Any chance you can provide a photo (sorry to be a pest)?  Thanks for the

 follow up on the adapter plate, anything would help.



 Regards,



 Anthony.

 On Wed, Mar 18, 2009 at 1:13 PM, Wesley Warner <warner.wesley(at)gmail.com>

 wrote:

>

> 

>

> I'm having some issues getting in touch with the the guy I had making

> them before.  Hopefully I can see him next week or so.  I thought I

> had one of the prototypes here, but I guess it's not.  I should be

> able to find that one next week also.

>

> The extenders normally are just some plate material that bolts to the

> landing gear holes and lowers the axles by about 3".  Most people

> started using them to run the larger Whirlwind prop and still have an

> adequate amount of ground clearance.

>

> Wes

>

> On Mon, Mar 16, 2009 at 1:12 AM, Yak 55M <yak55m(at)gmail.com> wrote:

> > Thanks Wes,

> >

> > the previous owner installed Grove 500x5 wheels and tires.  I don't

> > think I

> > have gear extenders, from what I can tell the axles are bolted directly

> > to

> > the base of the legs.  What do the extenders look like, and what is

> > their

> > purpose?  I will check my ailerons as you suggested and let you know if

> > I

> > need the bushings.

> >

> > Regards,

> >

> > Anthony.

> ========================

> rget="_blank">http://www.matronics.com/Navigator?Yak-List

> ===========

> http://forums.matronics.com

> ===========

> le, List Admin.

> ="_blank">http://www.matronics.com/contribution

> ===========

>



============
	


============

============

============

 	  Quote:

IMG00007-20090320-1220.jpg

Description:

Filesize:

322.16 KB

Viewed:

14137 Time(s)

IMG00008-20090320-1221.jpg

Description:

Filesize:

355.15 KB

Viewed:

14137 Time(s)

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Mon Mar 23, 2009 3:55 pm Post subject: Scott Taliwheel for Yak 55M

Hi Wes,



I am not sure if you received my previous email, but this is great news.  Are you willing to part with it for a price?  Or is there a way I can get the details to have one made locally?



Regards,



 Anthony. 



On Fri, Mar 20, 2009 at 9:26 AM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

[quote] I found the one adapter I have here at home.  It was packed away.  I

 have attached a pic of it.  In the picture is a gear extender as well,

 so you can get an idea of what they look like.  This particular Scott

 adapter is for a plane without the gear extenders.  It will work on

 one with them, it's just not perfect.

 

 Wes

 



 On Wed, Mar 18, 2009 at 7:34 PM, Yak 55M <yak55m(at)gmail.com (yak55m(at)gmail.com)> wrote:

 > Thanks Wes,

 >

 > that makes sense.  I think I have the extenders, but I will double check.

 > Any chance you can provide a photo (sorry to be a pest)?  Thanks for the

 > follow up on the adapter plate, anything would help.

 >

 > Regards,

 >

 > Anthony.

 >

 >

 > On Wed, Mar 18, 2009 at 1:13 PM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)>

 > wrote:

 >>

 >> --> Yak-List message posted by: Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)>

 >>

 >> I'm having some issues getting in touch with the the guy I had making

 >> them before.  Hopefully I can see him next week or so.  I thought I

 >> had one of the prototypes here, but I guess it's not.  I should be

 >> able to find that one next week also.

 >>

 >> The extenders normally are just some plate material that bolts to the

 >> landing gear holes and lowers the axles by about 3".  Most people

 >> started using them to run the larger Whirlwind prop and still have an

 >> adequate amount of ground clearance.

 >>

 >> Wes

 >>

 >> On Mon, Mar 16, 2009 at 1:12 AM, Yak 55M <yak55m(at)gmail.com (yak55m(at)gmail.com)> wrote:

 >> > Thanks Wes,

 >> >

 >> > the previous owner installed Grove 500x5 wheels and tires.  I don't

 >> > think I

 >> > have gear extenders, from what I can tell the axles are bolted directly

 >> > to

 >> > the base of the legs.  What do the extenders look like, and what is

 >> > their

 >> > purpose?  I will check my ailerons as you suggested and let you know if

 >> > I

 >> > need the bushings.

 >> >

 >> > Regards,

 >> >

 >> > Anthony.

 >>

 >>

 



 	  Quote: 	
		  > ========================

 >> rget="_blank">http://www.matronics.com/Navigator?Yak-List
	


 >> ===========

 >> http://forums.matronics.com

 >> ===========

 >> le, List Admin.

 >> ="_blank">http://www.matronics.com/contribution

 >> ===========

 >>

 >>

 >>

 >

 >

 >

 ============

 ============

 ============

 ============

 >

 >

 [b]

mikspin

Joined: 12 Aug 2007
Posts: 66

Posted: Thu Apr 02, 2009 10:57 am Post subject: Re: Scott Taliwheel for Yak 55M

Wes, 



I never saw a reply post on this, did you say that you had or could get some drawings on the Scott tailwheel adapter that was machined?



Please lemme know,



Mike Hastings

warner.wesley(at)gmail.co
Guest

Posted: Thu Apr 02, 2009 12:04 pm Post subject: Scott Taliwheel for Yak 55M

Mike,

  The guy I was working with was supposed to get back to me.  I just

spoke with him a few minutes ago, and lit a fire.   He made it seem

as though the file was gone because it has been so long.  However,

he's going to look.  He said that if he had the file and the rest of

the parts from the initial run, and I bought them, he would include

the file (if he can find it).  I'll keep you updated.



Wes



On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike(at)gmail.com> wrote:

 	  Quote: 	
		   



 Wes,



 I never saw a reply post on this, did you say that you had or could get some drawings on the Scott tailwheel adapter that was machined?



 Please lemme know,



 Mike Hastings





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 37409#237409

warner.wesley(at)gmail.co
Guest

Posted: Fri Apr 03, 2009 6:02 pm Post subject: Scott Taliwheel for Yak 55M

Ok.  The guy got back to me tonight.  He sent me a pic of the adapters

he has left (7 of them) and is looking for the digital file.  I think

they are complete except for a counter-bore hole and a final

sanding/finishing.  I'm trying to work a deal with him on all 7.  If

it works out, they should be around $150ea with the final

sanding/finishing to be done by the buyer.  They're made of 7075

Aluminum.  They bolt up to the existing tailwheel spring on Yak 55 and

55M's with no modifications.  If anyone is interested, please let me

know so, I can give him the go-ahead or not.

Thanks, Wes

On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner <warner.wesley(at)gmail.com> wrote:

 	  Quote: 	
		   Mike,

  The guy I was working with was supposed to get back to me.  I just

 spoke with him a few minutes ago, and lit a fire.   He made it seem

 as though the file was gone because it has been so long.  However,

 he's going to look.  He said that if he had the file and the rest of

 the parts from the initial run, and I bought them, he would include

 the file (if he can find it).  I'll keep you updated.

 Wes

 On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike(at)gmail.com> wrote:

> 

>

> Wes,

>

> I never saw a reply post on this, did you say that you had or could get some drawings on the Scott tailwheel adapter that was machined?

>

> Please lemme know,

>

> Mike Hastings

>

>

> Read this topic online here:

>

> http://forums.matronics.com/viewtopic.php?p=237409#237409

>

============

============

============

ralle, List Admin.

============

 	  Quote: 	
		  >

>

IMG_0117.JPG

Description:

Filesize:

354.81 KB

Viewed:

14080 Time(s)

yakflyr

Joined: 10 Mar 2009
Posts: 24

Posted: Sat Apr 04, 2009 9:33 am Post subject: Scott Taliwheel for Yak 55M

Hi Wes,

I am interested.

Regards,

Anthony.

On Fri, Apr 3, 2009 at 7:00 PM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

 [quote]Ok.  The guy got back to me tonight.  He sent me a pic of the adapters

 he has left (7 of them) and is looking for the digital file.  I think

 they are complete except for a counter-bore hole and a final

 sanding/finishing.  I'm trying to work a deal with him on all 7.  If

 it works out, they should be around $150ea with the final

 sanding/finishing to be done by the buyer.  They're made of 7075

 Aluminum.  They bolt up to the existing tailwheel spring on Yak 55 and

 55M's with no modifications.  If anyone is interested, please let me

 know so, I can give him the go-ahead or not.

 Thanks, Wes

 On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

 > Mike,

 >  The guy I was working with was supposed to get back to me.  I just

 > spoke with him a few minutes ago, and lit a fire.   He made it seem

 > as though the file was gone because it has been so long.  However,

 > he's going to look.  He said that if he had the file and the rest of

 > the parts from the initial run, and I bought them, he would include

 > the file (if he can find it).  I'll keep you updated.

 >

 > Wes

 >

 > On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike(at)gmail.com (acromike(at)gmail.com)> wrote:

 >> --> Yak-List message posted by: "mikspin" <acromike(at)gmail.com (acromike(at)gmail.com)>

 >>

 >> Wes,

 >>

 >> I never saw a reply post on this, did you say that you had or could get some drawings on the Scott tailwheel adapter that was machined?

 >>

 >> Please lemme know,

 >>

 >> Mike Hastings

 >>

 >>

 >>

 >>

 >> Read this topic online here:

 >>

 >> http://forums.matronics.com/viewtopic.php?p=237409#237409

 >>

 >>

 >>

 >>

 >>

 >>

 >>

============

 ============

 ============

 ralle, List Admin.

 ============

 >>

 >>

 >>

 >>

 >

 [b]

drc(at)wscare.com
Guest

Posted: Sat Apr 04, 2009 10:04 am Post subject: Scott Taliwheel for Yak 55M

Count me in.



Herb Coussons

639-8434

On Apr 3, 2009, at 9:00 PM, Wesley Warner wrote:



 	  Quote: 	
		   Ok.  The guy got back to me tonight.  He sent me a pic of the adapters

 he has left (7 of them) and is looking for the digital file.  I think

 they are complete except for a counter-bore hole and a final

 sanding/finishing.  I'm trying to work a deal with him on all 7.  If

 it works out, they should be around $150ea with the final

 sanding/finishing to be done by the buyer.  They're made of 7075

 Aluminum.  They bolt up to the existing tailwheel spring on Yak 55 and

 55M's with no modifications.  If anyone is interested, please let me

 know so, I can give him the go-ahead or not.



 Thanks, Wes



 On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner  

 <warner.wesley(at)gmail.com> wrote:

> Mike,

>  The guy I was working with was supposed to get back to me.  I just

> spoke with him a few minutes ago, and lit a fire.   He made it seem

> as though the file was gone because it has been so long.  However,

> he's going to look.  He said that if he had the file and the rest of

> the parts from the initial run, and I bought them, he would include

> the file (if he can find it).  I'll keep you updated.

>

> Wes

>

> On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike(at)gmail.com> wrote:

>> 

>>

>> Wes,

>>

>> I never saw a reply post on this, did you say that you had or  

>> could get some drawings on the Scott tailwheel adapter that was  

>> machined?

>>

>> Please lemme know,

>>

>> Mike Hastings

>>

>>

>>

>>

>> Read this topic online here:

>>

>> http://forums.matronics.com/viewtopic.php?p 37409#237409

>>

>>

>>

>>

>>

>>

>>

 ============

 ============

 ============

 ralle, List Admin.

 ============

>>

>>

>>

>>

>

 <IMG_0117.JPG>

bu131(at)swbell.net
Guest

Posted: Sat Apr 04, 2009 5:37 pm Post subject: Scott Taliwheel for Yak 55M

count me in

andres



From: Herb Coussons <drc(at)wscare.com>

To: yak-list(at)matronics.com

Sent: Saturday, April 4, 2009 1:02:56 PM

Subject: Re: Re: Scott Taliwheel for Yak 55M



   <warner.wesley(at)gmail.com (warner.wesley(at)gmail.com)> wrote:

 	  Quote: 	
		  > Mike,

>  The guy I was working with was supposed to get back to me.  I just

> spoke with him a few minutes ago, and lit a fire.   He made it seem

> as though the file was gone because it has been so long.  However,

> he's going to look.  He said that if he had the file and the rest of

> the parts from the initial run, and I bought them, he would include

> the file (if he can find it).  I'll keep you updated.

>

> Wes

>

> On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike(at)gmail.com (acromike(at)gmail.com)> wrote:

>>   you say that you had or  

>> could get some drawings on the Scott tailwheel adapter that was  

>> machined?

>>

>> Please lemme know,

>>

>> Mike Hastings

>>

>>

>>

>>

>> Read this topic online here:

>>

>> http://forums.matronics.com/viewtopic.php?p=237409#237409

>>

>>

>>

>>

>>

>>

>>

 ============

 ============

 ============

 ralle, List Admin.

 ============

>>

>>

>> -->  


	


 [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum