Matronics Email Lists :: View topic - Emailing: Kitfox shock cord tools

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Emailing: Kitfox shock cord tools

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

larry huntley

Joined: 19 Jul 2008
Posts: 149

Posted: Fri Mar 20, 2009 7:42 am Post subject: Emailing: Kitfox shock cord tools

Hi Folks,   Here are the shock cord tool pix and  instructions.

   The red handle tool is a (K&D??) tool from NAPA for pulling  spark plug leads. The hook with a handle is homade from 1/4" steel round from  the hardware store. It has a bit more hook than it seems in the photo. I have  changed at least a dozen cords witht hese tools 



   I reach in the cabin and hook the  first loop of the cord.thread it down to Mary,she pushes it back up. I pull hard  as I can and send it back down.she sends it back and I hold TIGHT with the KD  tool. The important thing is that you hold tight . Don't let anything slip back.  Do it with the KD. send the end back down. She pulls as hard as she can and you  hold while she sends it back up. You pull like heck and grab whith the  tool.Repeat,repeat. Sometimes I grab the cord with the KD and PUSH down to her  and hold. Last step is to push the hook down through to her and she hooks the  end loop on it. If you have done well you will pull up more cord than you  actually need and hook it over the knob. You will have taken a lot less than 10  minutes.

   Remember,don't let any slip back.If you do  you may have to unwrap the whole cord and start over again. I have often thought  for the few dollars for the KD tool,it might make it easier if you had two. One  to pull up with and one to push down with.

   Good luck and have fun.

 `                                                   Regards,   Larry Huntley, 4-1200  SoobEA-81

  

The message is ready to be sent  with the following file or link attachments:

Kitfox shock cord  tools



Note: To protect against computer viruses, e-mail programs may  Check your  e-mail security settings to determine how attachments are handled.

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Kitfox_shock_cord_tools.jpg

Description:

Filesize:

29.25 KB

Viewed:

3921 Time(s)

_________________
Larry Huntley,Dundee,NY
Kitfox 4-1200 N234EE
EA81,AMAX Redrive Warp 3 blade

patreilly43(at)hotmail.co
Guest

Posted: Fri Mar 20, 2009 8:27 am Post subject: Emailing: Kitfox shock cord tools

Larry C Thanks for the pictures. I have that exact sparkplug puller tool in my tool box. I am surprised you can hold the shockcord that tight with that tool. If I ever need to redo mine I will use your method.

 do not archive

 Pat Reilly

 Mod 3 582 Rebuild

 Rokford CIL

 

  From: asq(at)roadrunner.com

To: kitfox-list(at)matronics.com

Subject: Kitfox-List: Emailing: Kitfox shock cord tools

Date: Fri C 20 Mar 2009 11:39:33 -0400



    Hi Folks C    Here are the shock cord tool pix and instructions.

   The red handle tool is a (K&D??) tool from NAPA for pulling spark plug leads. The hook with a handle is homade from 1/4" steel round from the hardware store. It has a bit more hook than it seems in the photo. I have changed at least a dozen cords witht hese tools 



   I reach in the cabin and hook the first loop of the cord.thread it down to Mary Cshe pushes it back up. I pull hard as I can and send it back down.she sends it back and I hold TIGHT with the KD tool. The important thing is that you hold tight . Don't let anything slip back. Do it with the KD. send the end back down. She pulls as hard as she can and you hold while she sends it back up. You pull like heck and grab whith the tool.Repeat Crepeat. Sometimes I grab the cord with the KD and PUSH down to her and hold. Last step is to push the hook down through to her and she hooks the end loop on it. If you have done well you will pull up more cord than you actually need and hook it over the knob. You will have taken a lot less than 10 minutes.

   Remember Cdon't let any slip back.If you do you may have to unwrap the whole cord and start over again. I have often thought for the few dollars for the KD tool Cit might make it easier if you had two. One to pull up with and one to push down with.

   Good luck and have fun.

 `                                                Regards C   Larry Huntley C 4-1200 SoobEA-81

  

The message is ready to be sent with the following file or link attachments:

Kitfox shock cord tools



Note: To protect against computer viruses C e-mail programs may Check your e-mail security settings to determine how attachments are handled.  [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

dave

Joined: 22 Sep 2006
Posts: 1382

Posted: Sun Mar 22, 2009 4:17 am Post subject: Re: Emailing: Kitfox shock cord tools

Larry , I converted a Kitfox IV from floats to Bungee gear yesterday. 

I gotta agree , bungess are so easy to do with out visegrips,pliers, tiewraps and all the nonsense I read about.   Great tough gear too and lighter on the wallet and airplane than the newer gears out there  



http://rotaxaircraft.com/forum/viewtopic.php?f=8&t=87



no more than 5 minutes to do both bungees  so  easy -----

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube

larry huntley

Joined: 19 Jul 2008
Posts: 149

Posted: Sun Mar 22, 2009 4:39 am Post subject: Emailing: Kitfox shock cord tools

Dave, What is your address?  I will be driving across on the QEW in a couple 

of days. Will probably be short on time ,but who knows. Sure would like to 

see your gear.    Larry Huntley,Dundee,NY



---

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Larry Huntley,Dundee,NY
Kitfox 4-1200 N234EE
EA81,AMAX Redrive Warp 3 blade

dave

Joined: 22 Sep 2006
Posts: 1382

Posted: Sun Mar 22, 2009 5:04 am Post subject: Re: Emailing: Kitfox shock cord tools

Larry I am about 90 minutes from Hamilton. 



You can type in where you  at at here 

http://maps.google.com/maps?source=ig&hl=en&rlz=&=&q=15123%20nine%20mile%20road&um=1&ie=UTF-8&sa=N&tab=wl



And drive right in. Let me know what day and time range so I  can make sure i here.  If you flying check ahead all 3 runways are usable but a few wet spots in places still.  If you got King fox tires  - heck land anywhere.



You coming to buy a CD  -- how to put on those evil bungees in 5 minutes  LOL ?

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

kingfox.JPG

Description:

cfisher.com Kingfox Tires -- doing it the mud - get off that pavement with your bushplanes. LOL

Filesize:

47.29 KB

Viewed:

3879 Time(s)

larry huntley

Joined: 19 Jul 2008
Posts: 149

Posted: Mon Mar 23, 2009 5:16 pm Post subject: Emailing: Kitfox shock cord tools

Dave, You have a phone # in case I do get nearby. Leaving in the AM. 

Larry

---

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Larry Huntley,Dundee,NY
Kitfox 4-1200 N234EE
EA81,AMAX Redrive Warp 3 blade

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum