Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

isolation circuit

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

jamesneely

Joined: 24 Mar 2009
Posts: 6

Posted: Tue Mar 24, 2009 11:17 am Post subject: isolation circuit

I have a flightline fl-760 and the manual says that both mikes go hot on transmit.  That doesn't seem a like a great idea, particularly in a noisy cockpit.  They mention an optional isolation relay board, but apparently they never did produce it, so I have to make up my own.  

The problem is that while I can solder just fine, I suck at designing circuits.  Has anyone made one of these boards, or has a schematic that I can work from?  or any source for buying such beast?

thanx,

James

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Mar 25, 2009 10:57 am Post subject: isolation circuit

At 02:17 PM 3/24/2009, you wrote:

 	  Quote: 	
		  



I have a flightline fl-760 and the manual says that both mikes go 

hot on transmit.  That doesn't seem a like a great idea, 

particularly in a noisy cockpit.  They mention an optional isolation 

relay board, but apparently they never did produce it, so I have to 

make up my own.

The problem is that while I can solder just fine, I suck at 

designing circuits.  Has anyone made one of these boards, or has a 

schematic that I can work from?  or any source for buying such beast?


	


   Are you using the hot-mic intercom feature . . . or

   is it just a comm transceiver?

        Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jamesneely

Joined: 24 Mar 2009
Posts: 6

Posted: Wed Mar 25, 2009 11:47 am Post subject: Re: isolation circuit

I'm using the vox feature.  works great on the bench.  I'm not sure you can turn that feature off in this radio.

Would it work if I just put a relay in to disconnect the copilot mike on transmit..breaks the connection from the copilot mike to pin #3?  And at the same time grounds pin #7 (the transmit PTT)?



There will only be one PTT[/list]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

FL-760-Wiring-Diagram.jpg

Description:

Filesize:

258.65 KB

Viewed:

11894 Time(s)

jamesneely

Joined: 24 Mar 2009
Posts: 6

Posted: Wed Mar 25, 2009 11:57 am Post subject: isolation circuit

I'm using the vox intercom feature.  That part seems to work great, so I'd like to use it.

James



2009/3/25 Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)>

 [quote]--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> 

 

 At 02:17 PM 3/24/2009, you wrote:

  	  Quote: 	
		   --> AeroElectric-List message posted by: "jamesneely" <neelyjame(at)gmail.com (neelyjame(at)gmail.com)>

 

 I have a flightline fl-760 and the manual says that both mikes go hot on transmit.  That doesn't seem a like a great idea, particularly in a noisy cockpit.  They mention an optional isolation relay board, but apparently they never did produce it, so I have to make up my own.

  The problem is that while I can solder just fine, I suck at designing circuits.  Has anyone made one of these boards, or has a schematic that I can work from?  or any source for buying such beast?

 	
 



   Are you using the hot-mic intercom feature . . . or

   is it just a comm transceiver?

 

 

        Bob . . .

 

        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------



 

 

 

 ===========

  -

 ric-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ===========

 MS -

 k">http://forums.matronics.com

 ===========

 e -

           -Matt Dralle, List Admin.

 t="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 



[b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Mar 25, 2009 5:17 pm Post subject: isolation circuit

At 02:47 PM 3/25/2009, you wrote:

 	  Quote: 	
		  



I'm using the vox feature.  works great on the bench.  I'm not sure 

you can turn that feature off in this radio.

Would it work if I just put a relay in to disconnect the copilot 

mike on transmit..breaks the connection from the copilot mike to pin 

#3?  And at the same time grounds pin #7 (the transmit PTT)?



There will only be one PTT[/list]


	


   That would work. Check out

   this relay:



http://www.radioshack.com/product/index.jsp?productId 62483

        Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jamesneely

Joined: 24 Mar 2009
Posts: 6

Posted: Wed Mar 25, 2009 6:57 pm Post subject: Re: isolation circuit

Thanks Bob, but I'm not having any luck with that product ID.  Which relay is it?  There's a dpdt miniature  part #275-249

James

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Mar 25, 2009 11:28 pm Post subject: isolation circuit

At 09:57 PM 3/25/2009, you wrote:

 	  Quote: 	
		  



Thanks Bob, but I'm not having any luck with that product ID.  Which 

relay is it?  There's a dpdt miniature  part #275-249

James




	


   Hmmmm . . . I guess I don't know where you are located.

   That website link was to a Radio Shack part. The relay

   is a sealed, low power 12v, dpdt device. Do you have

   access to a Radio Shack store?



   The part suggested is a Tyco part. Here's the data

   sheet:



http://relays.tycoelectronics.com/datasheets/OMI-2P.pdf



    If you don't have access to Radio Shack then any

    other small signal relay will do (2A or

    less contacts).

        Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jamesneely

Joined: 24 Mar 2009
Posts: 6

Posted: Thu Mar 26, 2009 3:16 am Post subject: Re: isolation circuit

When I tried the link it didn't get me to that part, but it looks like that's the one I found one their site.  Given the info on the data sheet, I think my problem is solved.  Thanks to you, and all the others that chimed in.

We have "the Source" here in the frozen north, a subsidiary of Radio Shack.  I'll have no trouble getting what I need.



Thanx again,

James

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum