Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Inverted Carbs, was: Great Oil Debate

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
Guy Buchanan



Joined: 16 Jul 2006
Posts: 1204
Location: Ramona, CA

PostPosted: Mon Apr 13, 2009 10:07 am    Post subject: Inverted Carbs, was: Great Oil Debate Reply with quote

At 07:00 AM 4/13/2009, you wrote:
Quote:
Will the Bing carbs work in negative G?

Noel,
I don't think any float bowl system will work in 0 or
negative G. They rely on submersion of the main jet plus open bowl
vents to allow a pressure differential between the venturi and the
bowl. (That's what moves the gas into the venturi.) There are "pumper
carbs" for the 2-strokers that will work in any attitude. These could
probably be modified for the 912, if one didn't want to go to fuel
injection. You might also be able to get an Ellison carb to work on the 912.
Guy Buchanan
San Diego, CA
K-IV 1200 / 582-C / Warp / 300 hrs. and counting


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Guy Buchanan
Deceased K-IV 1200
A glider pilot too.
Back to top
View user's profile Send private message Send e-mail
dave



Joined: 22 Sep 2006
Posts: 1382

PostPosted: Mon Apr 13, 2009 11:51 am    Post subject: Re: Inverted Carbs, was: Great Oil Debate Reply with quote

Guy, 912 not a great neg G engine. Stock Oil system is the issue.
This is why not many convert the Rans S 9 $ S10 to 912s. But stick with a 582 or put in a 670.
http://rotaxaircraft.com/forum/viewtopic.php?f=16&t=63

Lot of power and will work flawless at any atttittude with pumper carbs and neg Gs. Outside loop would kill a 912 quickly. Check the videos http://rotaxaircraft.com/forum/viewtopic.php?f=3&t=29

Most 2 strokes work well with pumper carbs but you should pre mix.
Your oil injection will get air in unless you got a flop tube type of oil injection bottle. Really would be easier to just stay with Pre Mix.
Guy Buchanan wrote:
At 07:00 AM 4/13/2009, you wrote:
Quote:
Will the Bing carbs work in negative G?


Noel,
I don't think any float bowl system will work in 0 or
negative G. They rely on submersion of the main jet plus open bowl
vents to allow a pressure differential between the venturi and the
bowl. (That's what moves the gas into the venturi.) There are "pumper
carbs" for the 2-strokers that will work in any attitude. These could
probably be modified for the 912, if one didn't want to go to fuel
injection. You might also be able to get an Ellison carb to work on the 912.
Guy Buchanan
San Diego, CA
K-IV 1200 / 582-C / Warp / 300 hrs. and counting


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube
Back to top
View user's profile Send private message Visit poster's website
Boilermaker2000



Joined: 14 Apr 2009
Posts: 11
Location: West Lafayette, IN

PostPosted: Tue Apr 14, 2009 3:41 pm    Post subject: Re: Inverted Carbs, was: Great Oil Debate Reply with quote

How about fuel injection like the 600 E-TEC! I'm totally in love with this engine. Do you think that we could see some "homebuilders" modifying snowmobile engines for aircraft again? Or, do you think BPM has had enough success with the aircraft engines that they would be looking into releasing a 2-Stroke E-TEC UL engine? That would be awesome!

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group