Matronics Email Lists :: View topic - Sump Drain valve for 680F

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Sump Drain valve for 680F

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

rcdettmer(at)charter.net
Guest

Posted: Sat May 23, 2009 1:06 pm Post subject: Sump Drain valve for 680F

The last time I drained fuel from the center tank sump, the valve did not close completely and fuel continued to drip overboard.  After opening and closing several times, the dripping stopped.  I have not opened the valve since, for fear of it sticking open again.  Has anybody experienced this situation..??  I was unable to identify the valve in my parts manual.  Is it the same in all Commanders..??  I may need a replacement valve.  Anyone have one..??  Thanks.  

   

Randy Dettmer, AIA  

680F / N6253X  

   

[img]cid:image001.gif(at)01C9DBAE.47B07970[/img]  

   

Dettmer Architecture  

663 Hill Street  

San Luis Obispo, CA   93405  

805 541 4864 / Fax 805 541 4865  

www.dettmerarchitecture.com

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6419 Time(s)

moe-rosspistons(at)hotmai
Guest

Posted: Sat May 23, 2009 2:20 pm Post subject: Sump Drain valve for 680F

Randy,

  

 This valve (the twist valve that you  access through the small door under the wing) looks suspiciously like the Eelco  valve that I used to shut off the fuel in my D Altered 57 Chevy. Drag Car  equipped with early Hilborn Injectors in about 1972.  Meaning that it  was military surplus.  Most likely the valve needs to  be removed and new "o" rings installed.

 You are correct that the valve is not  listed in the Commander parts book, which is a very good  thing..........................

  

 Regards.

  

 Moe

 N680RR

 Proud Holder of The Golden Pedal  Award

 



   From: Randy Dettmer, AIA (rcdettmer(at)charter.net) 

 Sent: Saturday, May 23, 2009 1:57 PM

 To: commander-list(at)matronics.com (commander-list(at)matronics.com)  

 Subject: Sump Drain valve for 680F

 



  

The last time I drained fuel from  the center tank sump, the valve did not close completely and fuel continued to  drip overboard.  After opening and closing several times, the dripping  stopped.  I have not opened the valve since, for fear of it sticking open  again.  Has anybody experienced this situation..??  I was unable to  identify the valve in my parts manual.  Is it the same in all  Commanders..??  I may need a replacement valve.  Anyone have  one..??  Thanks. 

  

Randy Dettmer,  AIA 

680F /  N6253X 

  

[img]cid:A2013AAB5C0C4AB6B7350C9AE7B6E8A8(at)moemills1[/img] 

  

Dettmer  Architecture 

663  Hill Street 

San  Luis Obispo,  CA  93405 

805  541 4864 / Fax 805 541 4865 

www.dettmerarchitecture.com

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6419 Time(s)

rcdettmer(at)charter.net
Guest

Posted: Sun May 24, 2009 6:38 am Post subject: Sump Drain valve for 680F

Hi Moe,  

Thanks for the response.  I think the challenge will be to get the valve removed and the fuel line capped without spraying gas all over the place.  And then re-installing it.  Any suggestions, short of de-fueling the tank..??  

   

Randy  

     

[img]cid:image001.gif(at)01C9DC42.8B904550[/img]  

   

Dettmer Architecture  

663 Hill Street  

San Luis Obispo, CA  93405  

805 541 4864 / Fax 805 541 4865  

www.dettmerarchitecture.com  

  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe-rosspistons

 Sent: Saturday, May 23, 2009 3:15 PM

 To: commander-list(at)matronics.com

 Subject: Re: Sump Drain valve for 680F  

  

     

[b]Randy,[/b]  

    

   

    

[b]This valve (the twist valve that you access through the small door under the wing) looks suspiciously like the Eelco valve that I used to shut off the fuel in my D Altered 57 Chevy. Drag Car equipped with early Hilborn Injectors in about 1972.  Meaning that it was military surplus.  Most likely the valve needs to be removed and new "o" rings installed.[/b]  

    

[b]You are correct that the valve is not listed in the Commander parts book, which is a very good thing..........................[/b]  

    

   

    

[b]Regards.[/b]  

    

   

    

[b]Moe[/b]  

    

[b]N680RR[/b]  

    

[b]Proud Holder of The Golden Pedal Award[/b]  

    

   

        

From: Randy Dettmer, AIA (rcdettmer(at)charter.net)   

    

Sent: Saturday, May 23, 2009 1:57 PM  

    

To: commander-list(at)matronics.com (commander-list(at)matronics.com)   

    

Subject: Sump Drain valve for 680F  

  

  

    

   

  

The last time I drained fuel from the center tank sump, the valve did not close completely and fuel continued to drip overboard.  After opening and closing several times, the dripping stopped.  I have not opened the valve since, for fear of it sticking open again.  Has anybody experienced this situation..??  I was unable to identify the valve in my parts manual.  Is it the same in all Commanders..??  I may need a replacement valve.  Anyone have one..??  Thanks.  

   

Randy Dettmer, AIA  

680F / N6253X  

   

[img]cid:image001.gif(at)01C9DC42.8B904550[/img]  

   

Dettmer Architecture  

663 Hill Street  

San Luis Obispo, CA   93405  

805 541 4864 / Fax 805 541 4865  

www.dettmerarchitecture.com

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6417 Time(s)

scottmain

Joined: 14 Nov 2007
Posts: 29
Location: fort lauderdale, florida

Posted: Sun May 24, 2009 6:43 am Post subject: Sump Drain valve for 680F

That sump is the low spot in the system. get a bunch of gerry cans and  drain it dry. I know........someone stole all my gas one night. wasn't a drop  left.

  

  In a message dated 5/24/2009 10:39:30 A.M. Eastern Daylight Time,  rcdettmer(at)charter.net writes:

  	  Quote: 	
		        

Hi    Moe,   

Thanks for the    response.  I think the challenge will be to get the valve removed and the    fuel line capped without spraying gas all over the place.  And then    re-installing it.  Any suggestions, short of de-fueling the    tank..??   

    

Randy   

       

   

    

Dettmer    Architecture   

663    Hill Street   

San    Luis Obispo,    CA  93405   

805    541 4864 / Fax 805 541 4865   

www.dettmerarchitecture.com

   

             

   

From:    owner-commander-list-server(at)matronics.com    [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe-rosspistons

Sent: Saturday, May 23, 2009 3:15    PM

To:    commander-list(at)matronics.com

Subject: Re: Sump Drain    valve for 680F

   

       

[b]Randy,[/b]

      

 

      

[b]This valve (the twist valve that    you access through the small door under the wing) looks suspiciously like the    Eelco valve that I used to shut off the fuel in my D Altered 57 Chevy. Drag    Car equipped with early Hilborn Injectors in about 1972.  Meaning    that it was military surplus.  Most likely the valve needs to    be removed and new "o" rings    installed.[/b]

      

[b]You are correct that the valve    is not listed in the Commander parts book, which is a very good    thing..........................[/b]

      

 

      

[b]Regards.[/b]

      

 

      

[b]Moe[/b]

      

[b]N680RR[/b]

      

[b]Proud Holder of The Golden Pedal    Award[/b]

      

 

            

From: Randy    Dettmer, AIA (rcdettmer(at)charter.net) 

      

Sent:    Saturday, May 23, 2009 1:57 PM

      

To: commander-list(at)matronics.com (commander-list(at)matronics.com)    

      

Subject:    Sump Drain valve for    680F

      

 

   

The last time I drained fuel from    the center tank sump, the valve did not close completely and fuel continued to    drip overboard.  After opening and closing several times, the dripping    stopped.  I have not opened the valve since, for fear of it sticking open    again.  Has anybody experienced this situation..??  I was unable to    identify the valve in my parts manual.  Is it the same in all    Commanders..??  I may need a replacement valve.  Anyone have    one..??  Thanks.   

    

Randy Dettmer,    AIA   

680F /    N6253X   

    

   

    

Dettmer    Architecture   

663    Hill Street   

San    Luis Obispo,    CA  93405   

805    541 4864 / Fax 805 541 4865   

www.dettmerarchitecture.com   

 

	


 Recession-proof vacation ideas.  2">

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6417 Time(s)

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6417 Time(s)

tfisher(at)commandergroup
Guest

Posted: Sun May 24, 2009 7:28 am Post subject: Sump Drain valve for 680F

Drain the tank, you don't want to fool around with  combustibles under your loved possession.

 Tom

 C-GISS

 [quote]   ---

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6417 Time(s)

rcdettmer(at)charter.net
Guest

Posted: Sun May 24, 2009 8:06 am Post subject: Sump Drain valve for 680F

Thanks guys.  Good reason to go for a flight to burn up most of the fuel from the center tank before draining in to jugs.  Randy.  

     

[img]cid:image001.gif(at)01C9DC4E.E125CB00[/img]  

   

Dettmer Architecture  

663 Hill Street  

San Luis Obispo, CA  93405  

805 541 4864 / Fax 805 541 4865  

www.dettmerarchitecture.com  

  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom Fisher

 Sent: Sunday, May 24, 2009 8:28 AM

 To: commander-list(at)matronics.com

 Subject: Re: Sump Drain valve for 680F  

  

     

Drain the tank, you don't want to fool around with combustibles under your loved possession.  

    

Tom  

    

C-GISS  

  [quote]    

---

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6417 Time(s)

yourtcfg(at)aol.com
Guest

Posted: Mon May 25, 2009 8:45 pm Post subject: Sump Drain valve for 680F

I have removed several with the airplane fueled, you need to be careful, well organized and fast!!  jb

   	  Quote: 	
		  	


 

 

 --

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6414 Time(s)

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6414 Time(s)

kamala(at)MSN.COM
Guest

Posted: Tue May 26, 2009 6:30 am Post subject: Sump Drain valve for 680F

I have replaced the drain valves in 70QT w/ the easy and rebuildable cessna drains.  they work very well.  Ck w/ gary Kromer at commander aero for parts and paper work. gmc

  To: commander-list(at)matronics.com

Subject: Re: Sump Drain valve for 680F

Date: Tue C 26 May 2009 00:42:17 -0400

From: yourtcfg(at)aol.com

I have removed several with the airplane fueled C you need to be careful C well organized and fast!!  jb

  	  Quote: 	

--

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6412 Time(s)

image001.gif

Description:

Filesize:

2.9 KB

Viewed:

6412 Time(s)

BobsV35B(at)aol.com
Guest

Posted: Sat May 30, 2009 6:38 pm Post subject: Sump Drain valve for 680F

Good Evening Randy,

  

 Just be sure to properly ground the fuel tank to the receptacle into which  the fuel is being drained. There have been many airplanes and aircraft repair  stations burned to the ground during defueling operations. If you use plastic  containers, be extra careful and run a bare copper wire from inside the fuel  tank on down into the fuel in the accepting container. Ya can't be too  careful!

  

 Happy Skies,

  

 Old Bob

 Piper PA-20

 Downers Grove, Illinois

  

  In a message dated 5/24/2009 11:07:29 A.M. Central Daylight Time,  rcdettmer(at)charter.net writes:

  	  Quote: 	
		     

Thanks guys.     Good reason to go for a flight to burn up most of the fuel from the center    tank before draining in to jugs.     Randy. 	


 A Good Credit Score is 700 or Above. See yours in just 2 easy steps!

yourtcfg(at)aol.com
Guest

Posted: Sun May 31, 2009 8:17 am Post subject: Sump Drain valve for 680F

DE-FUEL ONLY OUTSIDE THE HANGAR, NEVER, NEVER INSIDE!!!!  jb

   	  Quote: 	
		  Ya can't be too careful! 	


 

 

 --

rsrandazzo(at)precisionma
Guest

Posted: Sun May 31, 2009 9:09 am Post subject: Sump Drain valve for 680F

Depends on the goal, I suppose.  J  

   

Do not archive  

   

   

     

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of yourtcfg(at)aol.com

 Sent: Sunday, May 31, 2009 9:17 AM

 To: commander-list(at)matronics.com

 Subject: Re: Sump Drain valve for 680F  

  

   

DE-FUEL ONLY OUTSIDE THE HANGAR, NEVER, NEVER INSIDE!!!!  jb  

Ya can't be too careful!  



 

 

 --

nico(at)cybersuperstore.c
Guest

Posted: Sun May 31, 2009 2:58 pm Post subject: Sump Drain valve for 680F

You mean like instantly selling the hangar and plane to the  insurance company?

   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Robert S.  Randazzo

Sent: Sunday, May 31, 2009 10:08 AM

To:  commander-list(at)matronics.com

Subject: RE: Sump Drain  valve for 680F

Depends  on the goal, I suppose.  J 

Do  not archive 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of  yourtcfg(at)aol.com

Sent: Sunday, May 31, 2009 9:17 AM

To:  commander-list(at)matronics.com

Subject: Re: Sump Drain  valve for 680F

DE-FUEL ONLY OUTSIDE THE HANGAR, NEVER, NEVER  INSIDE!!!!  jb 

Ya can't be too careful! 

-----Original  Message-----

From: BobsV35B(at)aol.com

To:  commander-list(at)matronics.com

Sent: Sat, 30 May 2009 7:36 pm

Subject: Re:  Sump Drain valve for 680F   

Good  Evening Randy,

Just be  sure to properly ground the fuel tank to the receptacle into which the fuel is  being drained. There have been many airplanes and aircraft repair stations  burned to the ground during defueling operations. If you use plastic containers,  be extra careful and run a bare copper wire from inside the fuel tank on down  into the fuel in the accepting container. Ya can't be too  careful!

Happy  Skies,

Old  Bob

Piper  PA-20

Downers  Grove, Illinois

In a  message dated 5/24/2009 11:07:29 A.M. Central Daylight Time, rcdettmer(at)charter.net (rcdettmer(at)charter.net)  writes:

  	  Quote: 	

Thanks    guys.  Good reason to go for a flight to burn up most of the fuel from    the center tank before draining in to jugs.     Randy.

 	  Quote: 	

Wanna  slim down for summer? Go to America  Takes it Off to learn how. 

 	  Quote: 	

0 	  Quote: 	

1 	  Quote: 	

2 	  Quote: 	

3 	  Quote: 	

4 	  Quote: 	

5 	  Quote: 	

6 	  Quote: 	

7 	  Quote: 	

8 	  Quote: 	

9 	  Quote: 	

0 	  Quote: 	

1 	  Quote: 	

2

 	  Quote: 	

3   [quote][b]

steve2(at)sover.net
Guest

Posted: Mon Jun 01, 2009 11:59 am Post subject: Sump Drain valve for 680F

Neat opportunity to see just how much fuel the ship  might REALLY hold when you refill.

  

 Our 500B took 150 gallons to fill a completely  defueled 156 gallon system once, and 150 gallons another time parked in the  opposite direction at the same pump.

  

 Either we're getting chubby gallons, or maybe we  don't really hold 156.

  

 I guess some folks like the simplicity of all the  tanks draining into one, but I sure sometimes miss having fuel squirreled away  in other tanks on a long drive home.

  

 Steve

 [quote]   ---

tfisher(at)commandergroup
Guest

Posted: Mon Jun 01, 2009 3:08 pm Post subject: Sump Drain valve for 680F

I would take the opportunity of an empty fuel system to  clamp a clear hose to the center tank drain, hook the other end of the hose to  the side/top of the fuselage and add 10 US gallons at a time.  At each 10  USG increment verify the indication on the fuel gauge as well as mark the clear  hose.

 Once all of the above is completed you have a calibrated  fuel gauge as well as a calibration hose so when the fuel is down below dippable  range on the wing you still can verify the exact quantity of fuel in the center  tank using the hose, in a sense dipping the tank.

 So if you are from the school that does not trust  electrical fuel gauges then you can still measure (dip) the center  tank.

  

 Tom,

 the swimmer.

  

 [quote]   ---

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum