Matronics Email Lists :: View topic - What did you do today?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

What did you do today?
Goto page 1, 2, 3, 4 Next

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

carlossa52(at)gmail.com
Guest

Posted: Wed May 27, 2009 5:53 pm Post subject: What did you do today?

'Evening, all

After almost a month working 12-16 h day ( and weekends ), I am starting to have a bit of down time.



Yesterday I bent the 4 extrusion 6V11-5. It took quite a bit of muscle and patience (both in short supply), but they came out quite nice.

 (6V11-5 can be seen here, very bottom, left:

http://www.zenithair.com/zodiac/data/6-v-0.pdf )



I also made the holes for the gear slides on the bottom skin - pretty unnerving, given the gazillion hours it took me to polish it (hey, gazillion made it to the dictionary !).

 

And this evening I placed the skin on top of the (upside down) skeleton, and everything fits beautifully! 

It's gratifying, after spending so many hours on it...

Tomorrow, if I muster enough courage, there will be some drilling going on!

 

Slowly but surely (emphasis on "slowly", working on the "surely").



PS: fly-in at St. Lazare on June 14 http://www.eaa266.org/assets/pics/100th_anniv_of_flight_poster.pdf

 http://gc.kls2.com/airport/CST3

http://www.ourairports.com/airports/CA-CST3/



Carlos

CH601-HD, plans

 

  [quote][b]

purplemoon99(at)bellsouth
Guest

Posted: Wed May 27, 2009 6:11 pm Post subject: What did you do today?

Larry Webber

Joined: 05 Jun 2008
Posts: 63
Location: West Kingston Rhode Island

Posted: Wed May 27, 2009 7:05 pm Post subject: What did you do today?

itested and mounted my 12 plate oil cooler



 Larry



  



[quote] From: purplemoon99(at)bellsouth.net

 To: zenith-list(at)matronics.com; zenith-list(at)matronics.com

 Subject: Re: Zenith-List: What did you do today?

 Date: Thu C 28 May 2009 02:10:06 +0000

 

 

 

Insert movie times and more without leaving Hotmail®. See how.   	  Quote: 	
		  [b]

_________________
how do you eat an elephant ? one bite at a time

naumuk(at)windstream.net
Guest

Posted: Thu May 28, 2009 6:23 am Post subject: What did you do today?

Larry-

     Did you have it boiled out at a  radiator shop or is it new? It's amazing the crud that came out of my folded fin  even though it was pristine on the outside. Remember, the oil cooler is post oil  filter in the loop and anything that gets dislodged goes straight to the  bearings, etc. Considering how small a cooler is, the cost should me  minimal. In my case, the guy at the radiator shop didn't even charge  me. REALLY cheap peace of mind.

                                                                 Bill 

 [quote]   ---

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Thu May 28, 2009 8:33 am Post subject: Re: What did you do today?

Got the seat cushions layers glued together. Actually I started this Monday and ran out of glue. Had to head back to Home Depot's aviation department for more glue and finished with a quick trip to the airport yesterday. I'm going to let them sit so the bend in the cardboard backing takes a little better then off they go to the upholstery shop for covering.



They are quite comfy.



This photo is pre glueing and trimming.

seats1.jpg

Description:

Filesize:

123.61 KB

Viewed:

18238 Time(s)

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Rickey B.

Joined: 22 Mar 2008
Posts: 70

Posted: Thu May 28, 2009 8:38 am Post subject: What did you do today?

Hey, Gig...You mean you are not going to do the sewing

yourself?????  Where the sense of adventure??!!



		Do NOT archive.

Got the seat cushions layers glued together. Actually I started this

Monday and ran out of glue. Had to head back to Home Depot's aviation

department for more glue and finished with a quick trip to the airport

yesterday. I'm going to let them sit so the bend in the cardboard

backing takes a little better then off they go to the upholstery shop

for covering.



They are quite comfy.

Larry Webber

Joined: 05 Jun 2008
Posts: 63
Location: West Kingston Rhode Island

Posted: Thu May 28, 2009 10:53 am Post subject: What did you do today?

Bill  being as frugal as i am  i used a boat bilge pump set in a solution of ATF

 and acetone ran tubing in one side and out to return to solution. pump was operated by a 12 volt car battery  C let run about an hour then ran a clean solution until i was 

 satisfied cooked in oven (my own not my wifes kitchen oven) and ran once again

 I showed   mark from Clarks Corvair at CC#14 and he was impressed even the outside looked new

 Larry Webber 601xl corvair chugger



  

  From: naumuk(at)windstream.net

To: zenith-list(at)matronics.com

Subject: Re: What did you do today?

Date: Thu C 28 May 2009 10:18:41 -0400



  .ExternalClass .EC_hmmessage P {padding-right:0px;padding-left:0px;padding-bottom:0px;padding-top:0px;} .ExternalClass BODY.EC_hmmessage {font-size:10pt;font-family:Verdana;}   Larry-

     Did you have it boiled out at a radiator shop or is it new? It's amazing the crud that came out of my folded fin even though it was pristine on the outside. Remember C the oil cooler is post oil filter in the loop and anything that gets dislodged goes straight to the bearings C etc. Considering how small a cooler is C the cost should me minimal. In my case C the guy at the radiator shop didn't even charge me. REALLY cheap peace of mind.

                                                             Bill 

 [quote] ---

_________________
how do you eat an elephant ? one bite at a time

cookwithgas

Joined: 06 Nov 2007
Posts: 159

Posted: Thu May 28, 2009 1:54 pm Post subject: Re: What did you do today?

Moving my airplane factory to Texas.

Moving Shop.JPG

Description:

Filesize:

83.97 KB

Viewed:

18218 Time(s)

Ron Lendon

Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

Posted: Thu May 28, 2009 4:33 pm Post subject: Re: What did you do today?

 	  cookwithgas wrote: 	
		  Moving my airplane factory to Texas. 	




Hey Scott,



Does that mean there will be another scratch built airplane?  One with a drawl perhaps?

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/

z601(at)anemicaardvark.co
Guest

Posted: Thu May 28, 2009 4:41 pm Post subject: What did you do today?

On Thursday 28 May 2009 16:54, cookwithgas wrote:

 	  Quote: 	
		   



 Moving my airplane factory to Texas.


	


Texas is a big place. What part of Texas are you moving to, if one may ask? 

I'm in far west Texas, about 100 miles north of the Big Bend.

-- 

-- 

=============================================

                Do not archive.

=============================================

                Jim B Belcher

    BS, MS Physics, Math, Computer Science

                  A&P/IA

     Retired aerospace technical manager

=============================================

cookwithgas

Joined: 06 Nov 2007
Posts: 159

Posted: Thu May 28, 2009 4:42 pm Post subject: Re: What did you do today?

Ron:



That truck has 99% of the wing parts for a scratch-built Bearhawk riding below in those side bins between the axles.  I wrapped everything up in this blue foam sheet stuff my pool installer was supposed to put between the liner and the pool walls but didn't.  I saved it in the attic for four years and it came in real handy to wrap the spars and ribs.  It also has my TIG welder that will be hooked up soon so I can continue welding on the steel parts to finish the wings.  



Thanks for noticing! 



Scott Laughlin

Waxahachie, Texas

601XL/Corvair

130 hours

jlatimer1(at)cox.net
Guest

Posted: Thu May 28, 2009 4:43 pm Post subject: What did you do today?

On Monday (Labor Day), my grandson and I drove to Palm Springs CA to attend the Memorial Day Ceremony at the Palm Springs Air Museum.  After the ceremony, we drove to Chino CA and spent the night.



On Tuesday we visited both the Yanks Museum and Planes of Fame Museum eating at Flo's Cafe on the airport.  Can't believe all of the Warbirds on one airport.  Also got a tour of the all the restoration projects in the shop by one of the volunteers at Yanks.  Too many airplanes too little time.  After the museums closed we drove to San Diego.



Wednesday morning we toured the USS Midway in San Diego Harbor and then onto the San Diego Air Museum in Balboa Park.  We took a side trip to the Museum of Natural History.  Grandson took over 400 photos and hopefully we made some memories together.



Really didn't accomplish much on project.  Oh well.



Jerry

naumuk(at)windstream.net
Guest

Posted: Fri May 29, 2009 4:48 am Post subject: What did you do today?

Larry-

     Sounds like you did good. My main point  was, don't be fooled by what the outside looks like. Did you have a batch of  crud come out?

                                                            Bill

 [quote]   ---

Larry Webber

Joined: 05 Jun 2008
Posts: 63
Location: West Kingston Rhode Island

Posted: Fri May 29, 2009 5:11 pm Post subject: What did you do today?

Bill in word   yes



 Larry



  



  From: naumuk(at)windstream.net

To: zenith-list(at)matronics.com

Subject: Re: What did you do today?

Date: Fri C 29 May 2009 08:44:42 -0400



  .ExternalClass .EC_hmmessage P {padding-right:0px;padding-left:0px;padding-bottom:0px;padding-top:0px;} .ExternalClass BODY.EC_hmmessage {font-size:10pt;font-family:Verdana;}   Larry-

     Sounds like you did good. My main point was C don't be fooled by what the outside looks like. Did you have a batch of crud come out?

                                                         Bill

 [quote] ---

_________________
how do you eat an elephant ? one bite at a time

mitch(at)HODGES.INFO
Guest

Posted: Sun Jun 07, 2009 5:07 pm Post subject: What did you do today?

Guess it should be what did I do this week?



I just got back from enjoying a few days in the TN mountains exercising a

gift given to my by my angel of a wife! I took a full basic aerobatics

course at http://www.aceaerobaticschool.com/.  6 hours of flight time and an

equal amount of ground school over two days, one-on-one with the instructor,

Catherine Cavagnaro.  Catherine was trained by, and was partners with, the

late Bill Kershner who wrote the book (literally) on aerobatic flight.

Bill's C152 Aerobat "Orville" is on display in the Smithsonian Udvar-Hazy

Center right under the wing of the Concorde.  We flew its twin "Wilbur".



What a fantastic experience and I  know I'll be a better pilot for it.

Catherine is a real pro, and patient, even with a ham-fisted, straight and

level guy like me.  Definitely got me back in the building mode!



Mitch Hodges

601HDS (working on the wings)

http://www.hodges.aero

PatrickW

Joined: 27 Oct 2006
Posts: 380
Location: Fort Worth, Texas

Posted: Mon Jun 08, 2009 8:05 am Post subject: Re: What did you do today?

Took apart a $15 dwyer gauge, printed a new instrument face for it with my inkjet printer, put it back together, and now it's a $400 "Lift Reserve Indicator".  



- Pat

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Mon Jun 08, 2009 8:49 am Post subject: Re: What did you do today?

I pulled off the spinner and replaced the J-nuts I had on the front prop bulkhead with nut plates.  MUCH better.



I also started the wiring process between the Dynon, the trim servos and the buttons on the stick.



Which other than some clean up and quick ties is the last of the wiring until the wings go on.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Rickey B.

Joined: 22 Mar 2008
Posts: 70

Posted: Mon Jun 08, 2009 8:53 am Post subject: What did you do today?

Go Pat!!!!

Took apart a $15 dwyer gauge, printed a new instrument face for it with

my inkjet printer, put it back together, and now it's a $400 "Lift

Reserve Indicator".  



- Pat



		Do NOT archive

eddies

Joined: 20 Jun 2006
Posts: 40
Location: Australia

Posted: Mon Jun 08, 2009 3:27 pm Post subject: Re: What did you do today?

My wife and I did a beautiful 3 hour flight from our local airport in Cessnock Australia with 2 friends in a Jabiru. Just paste the link below into your web browser.



http://picasaweb.google.com/lh/sredir?uname=annems123&target=ALBUM&id=5344395194501819457&authkey=Gv1sRgCMf_pI-9pebMfw&feat=email 



Cheers

Eddie Seve

Zenith 601XL

Jab 3300 

160 hours

sdthatcher

Joined: 13 Mar 2008
Posts: 91
Location: Port Saint Lucie

Posted: Tue Jun 09, 2009 5:26 am Post subject: What did you do today?

Those were beautiful pictures Eddie!  Thanks.



Scott Thatcher

601XL w/ 27 Hours

N601EL w WW Corvair



<<My wife and I did a beautiful 3 hour flight from our local airport in 

Cessnock

<<Australia with 2 friends in a Jabiru. Just paste the link below into your 

web

<<browser.



http://picasaweb.google.com/lh/sredir?uname=annems123&target=ALBUM&id=5344395194501819457&authkey=Gv1sRgCMf_pI-9pebMfw&feat=email



<Cheers

<Eddie Seve

<Zenith 601XL

<Jab 3300

<160 hours

_________________
Scott Thatcher, Port Saint Lucie, FL
601XL with Corvair, Registered as E-LSA
N601EL, EAA203 140 hours and not flying currently.

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours Goto page 1, 2, 3, 4 Next
Page 1 of 4

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum