 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Speedy11(at)aol.com
Guest
|
 Posted: Sat Jun 06, 2009 3:06 pm Post subject: [RV-8] Digest Number 1216 |
 |
|
Glenn,
I did the same as Gary Daubert - I used a Dremel type tool with diamond cutters. You can spend $15 for each diamond cutter at Sears or buy 6 for $9 at Harbour Freight. They both worked equally well and cut the plexi with no problem.
Stan Sutterfield
| Quote: | we just finished lining up and clecoing the canopy frame to the fuse and getting ready to start trimming the canopy. we set it on the frame and it appears to be about 2 inches too big at the molding flange so a lot of trimming is going to be called for. we have been looking a t trimming options, the die grinder as vans recommends even tho that would take a while due to limited air capacity in the hanger, and a rotozip with a 90 degree attachment and cutting disc.. anyboy got any suggestions??
plus, somebody in rv land probably has a detailed description of the process and maybe a video...as you know, vans instructions are a little lacking in specifics.i.e. dont use a saw and be careful. it sure would help to be able to look at it.
we gotta get with it...engine is on the way..it should be here by the end of june..
appreciate all the help...thanks..Bell
|
Stay connected and tighten your budget with a great mobile device for under $50. Take a Peek!
[quote][b]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
 |
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 25704
Location: Livermore CA USA
|
| Posted: Sat Jun 06, 2009 3:22 pm Post subject: [RV-8] Digest Number 1216 |
|
|
It took me two tries on the RV-8 canopy because of a huge crack near the back. On the second try, I used a Rotozip with a 90 deg cutoff wheel. Sweet ticket! Way better than the pneumatic cutoff wheel I used on the first try. I documented my process pretty well on my Kitlog web site. Links are provided below.
Have a look here:
Page 1:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75161&row=60
Page 2:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75277&row=59
Page 3:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75278&row=58
and here:
Page 1:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75162&row=55
Page 2:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75279&row=54
Page 3:
http://www.mykitlog.com/users/display_log.php?user=dralle&project=638&category 973&log=75280&row=53
Matt Dralle
RV-8 #82880 N998RV
Digging The Wings Out...
At 04:03 PM 6/6/2009 Saturday, Speedy11(at)aol.com wrote:
| Quote: | Glenn,
I did the same as Gary Daubert - I used a Dremel type tool with diamond cutters. You can spend $15 for each diamond cutter at Sears or buy 6 for $9 at Harbour Freight. They both worked equally well and cut the plexi with no problem.
Stan Sutterfield
we just finished lining up and clecoing the canopy frame to the fuse and getting ready to start trimming the canopy. we set it on the frame and it appears to be about 2 inches too big at the molding flange so a lot of trimming is going to be called for. we have been looking a t trimming options, the die grinder as vans recommends even tho that would take a while due to limited air capacity in the hanger, and a rotozip with a 90 degree attachment and cutting disc.. anyboy got any suggestions??
plus, somebody in rv land probably has a detailed description of the process and maybe a video...as you know, vans instructions are a little lacking in specifics.i.e. dont use a saw and be careful. it sure would help to be able to look at it.
we gotta get with it...engine is on the way..it should be here by the end of june..
appreciate all the help...thanks..Bell
|
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle(at)matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
