 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
aslsa.rng(at)gmail.com
Guest
|
 Posted: Mon Jul 13, 2009 1:03 pm Post subject: Another alternative engine |
 |
|
Flew over to Selby's, a local ultralight strip on a horse farm, this morning in the trike and met a fellow who has a Moto Guzzi engine on a Pinnochio (Bleriot look alike if you stand back a few feet. He has a Moto Guzzi engine mated to a Rotax E box. The project has been stalled because he can't get the engine to run at idle and off idle with the prop on it. Runs fine without the prop, runs fine above 4000 RPM. Anyone tried this engine on a Kolb, or anything else for that matter. Steve tells me they're popular in Europe, but they use a different gearbox.
Rick Girard
do not archive
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
519.65 KB |
| Viewed: |
4263 Time(s) |
|
|
|
| Back to top |
|
 |
slyck(at)frontiernet.net
Guest
|
| Posted: Mon Jul 13, 2009 1:24 pm Post subject: Another alternative engine |
|
|
centrifugal clutch
BB
On 13, Jul 2009, at 5:00 PM, Richard Girard wrote:
| Quote: | Flew over to Selby's, a local ultralight strip on a horse farm,
this morning in the trike and met a fellow who has a Moto Guzzi
engine on a Pinnochio (Bleriot look alike if you stand back a few
feet. He has a Moto Guzzi engine mated to a Rotax E box. The
project has been stalled because he can't get the engine to run at
idle and off idle with the prop on it. Runs fine without the prop,
runs fine above 4000 RPM. Anyone tried this engine on a Kolb, or
anything else for that matter. Steve tells me they're popular in
Europe, but they use a different gearbox.
Rick Girard
do not archive<Guzzi engine with E drive 2.jpg>
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
aslsa.rng(at)gmail.com
Guest
|
| Posted: Mon Jul 13, 2009 2:52 pm Post subject: Another alternative engine |
|
|
Bob, That was my first suggestion, but if you put a clutch in, the starter won't work.
Rick
do not archive
On Mon, Jul 13, 2009 at 4:23 PM, robert bean <slyck(at)frontiernet.net (slyck(at)frontiernet.net)> wrote:
[quote]--> Kolb-List message posted by: robert bean <slyck(at)frontiernet.net (slyck(at)frontiernet.net)>
centrifugal clutch
BB
On 13, Jul 2009, at 5:00 PM, Richard Girard wrote:
| Quote: | Flew over to Selby's, a local ultralight strip on a horse farm, this morning in the trike and met a fellow who has a Moto Guzzi engine on a Pinnochio (Bleriot look alike if you stand back a few feet. He has a Moto Guzzi engine mated to a Rotax E box. The project has been stalled because he can't get the engine to run at idle and off idle with the prop on it. Runs fine without the prop, runs fine above 4000 RPM. Anyone tried this engine on a Kolb, or anything else for that matter. Steve tells me they're popular in Europe, but they use a different gearbox.
Rick Girard
do not archive<Guzzi engine with E drive 2.jpg>
|
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Jason Omelchuck
Joined: 07 May 2009
Posts: 120
Location: Portland Oregon
|
| Posted: Tue Jul 14, 2009 12:13 pm Post subject: Re: Another alternative engine |
|
|
Try putting a 10# flywheel on it that is directly attached to the engine (in-between the engine and rubber donut). Make sure that most of the weight is on the outer ring of the flywheel.
The BMW R100 smoothed out considerably at low RPM with a heavier flywheel.
| aslsa.rng(at)gmail.com wrote: | Flew over to Selby's, a local ultralight strip on a horse farm, this morning in the trike and met a fellow who has a Moto Guzzi engine on a Pinnochio (Bleriot look alike if you stand back a few feet. He has a Moto Guzzi engine mated to a Rotax E box. The project has been stalled because he can't get the engine to run at idle and off idle with the prop on it. Runs fine without the prop, runs fine above 4000 RPM. Anyone tried this engine on a Kolb, or anything else for that matter. Steve tells me they're popular in Europe, but they use a different gearbox.
Rick Girard
do not archive |
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
