Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Flap Skins Too Short?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 25203
Location: Livermore CA USA

PostPosted: Sun Jul 19, 2009 3:58 pm    Post subject: Flap Skins Too Short? Reply with quote

Dear Listers,

Please see the attached photo taken from the underside of my RV-8. I was going to cut the bottom flap skin to match the diagonal of the fuselage skin per the "View E-E Flaps Fairing" on DGW 80. But, it appears that the aft portion of the flap skin was cut too short by the QB builders. Note that the front part seems to be exactly the right length and that diagonal cut will clip just perfectly. But on the aft skin of the flap, it is cut off about 2" too short to continue the diagonal line. Since the fuselage side skin is curving up right there, this will act like a giant air scoop. The flaps appear to be mounted in the correct position, left/right as they are the required 3/16" from the ailerons.

The left side is exactly the same as the right side as shown in the picture.

Thoughts?

Thanks!

Matt Dralle
RV-8 #82880 N998RV
FWF Is Right Around The Corner!!


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List



2009.07.20_-_RV-8_-_Flap_To_Fuselage_To_Fairing_Fit.jpg
 Description:
 Filesize:  111.09 KB
 Viewed:  1484 Time(s)

2009.07.20_-_RV-8_-_Flap_To_Fuselage_To_Fairing_Fit.jpg



_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
rv8a2001(at)yahoo.com
Guest





PostPosted: Sun Jul 19, 2009 4:39 pm    Post subject: Flap Skins Too Short? Reply with quote

This picture opened fine.....

This looks normal to me IIRC, geez its been 5.5 yrs flying now, just trim to the fuse IIRC. I also recall that it is somewhat common for the flaps to fit differently to the fuse L or R side. Maybe this is not a problem with the quick builds but in the "old" days I recall this isssue.

Scott

RV-8a
--- On Sun, 7/19/09, Matt Dralle <dralle(at)matronics.com> wrote:

From: Matt Dralle <dralle(at)matronics.com>
Subject: Flap Skins Too Short?
To: rv-list(at)matronics.com, rv8-list(at)matronics.com
Date: Sunday, July 19, 2009, 4:57 PM

   
Dear Listers,

Please see the attached photo taken from the underside of my RV-8.  I was going to cut the bottom flap skin to match the diagonal of the fuselage skin per the "View E-E Flaps Fairing" on DGW 80.  But, it appears that the aft portion of the flap skin was cut too short by the QB builders.  Note that the front part seems to be exactly the right length and that diagonal cut will clip just perfectly.  But on the aft skin of the flap, it is cut off about 2" too short to continue the diagonal line.  Since the fuselage side skin is curving up right there, this will act like a giant air scoop.  The flaps appear to be mounted in the correct position, left/right as they are the required 3/16" from the ailerons.

The left side is exactly the same as the right side as shown in the picture


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Matt Dralle
Site Admin


Joined: 08 Nov 2005
Posts: 25203
Location: Livermore CA USA

PostPosted: Mon Jul 20, 2009 4:07 pm    Post subject: Re: Flap Skins Too Short? Reply with quote

Here's what I heard back from Van's today regarding the issue including the updated picture:

Quote:
Simply rivet on a .040" extension (like the -4 & -6 builders had to) as shown in the attached picture. You can bend it to fit any contour or overlap the flap intersection fairing as you see fit. Use pop or solid flush rivets to attach.


Um, good thing its underneath... Wink

Matt


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List



8 flap.JPG
 Description:
Added piece to flap.
 Filesize:  61.88 KB
 Viewed:  1467 Time(s)

8 flap.JPG



_________________
Matt Dralle
Matronics Email List Administrator
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group