Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Visio?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

tim2542(at)sbcglobal.net
Guest

Posted: Tue Sep 29, 2009 8:42 pm Post subject: Visio?

Has anyone tried using Visio to draw their schematic? It looks like it will

work but I'm not finding much in the way of automotive symbols i.e.

solenoids relays etc. 

Can anyone recommend a free or cheap program for this?

Thanks, Tim Andres

rv-9a-online(at)telus.net
Guest

Posted: Tue Sep 29, 2009 9:41 pm Post subject: Visio?

Hi Tim.

Go here: www.vx-aviation.com and follow the link near the top of the page 

for the free schematic software, library and design example from my RV-9A. 

Doesn't have everything but it's very easy to create symbols on the fly.



Thanks,

Vern Little



--------------------------------------------------

From: "Tim Andres" <tim2542(at)sbcglobal.net>

Sent: Tuesday, September 29, 2009 9:37 PM

To: <aeroelectric-list(at)matronics.com>

Subject: Visio?



 	  Quote: 	
		   

 <tim2542(at)sbcglobal.net>

 Has anyone tried using Visio to draw their schematic? It looks like it 

 will

 work but I'm not finding much in the way of automotive symbols i.e.

 solenoids relays etc.

 Can anyone recommend a free or cheap program for this?

 Thanks, Tim Andres

jay(at)horriblehyde.com
Guest

Posted: Tue Sep 29, 2009 11:14 pm Post subject: Visio?

I have used Visio a lot and re-drawn many of the symbols- I can let you have

my 'library page' if you'd like.



I use Visio a lot so I found it pretty useful to draw the schematics as

well.



Jay

--

pestar

Joined: 11 Apr 2007
Posts: 61
Location: Auckland, New Zealand

Posted: Wed Sep 30, 2009 12:09 am Post subject: Re: Visio?

 	  jay(at)horriblehyde.com wrote: 	
		  I have used Visio a lot and re-drawn many of the symbols- I can let you have

my 'library page' if you'd like.



I use Visio a lot so I found it pretty useful to draw the schematics as

well.



Jay



-- 	


If you are able to make available your library of Visio symbols that would be appreciated.  I have a Visio one off aircraft symbols that I got of the net that I am happy to share (the file extension .VSS is not permitted for attachments) - contact to email.



Regards 

Peter Armstrong

Auckland, New Zealand

Building a French carbon fibre plane MCR-4S "www.dynaero.com"

jay(at)horriblehyde.com
Guest

Posted: Wed Sep 30, 2009 12:41 am Post subject: Visio?

Hi there Peter,



I have sent what I have to you via your email address; you can also convert

the dwg files that Bob supplies, although I find that using them after

conversion is not easy. If anyone else wants what I have (not much..) then

mail me directly.



Jay



--

andrewbutler(at)ireland.c
Guest

Posted: Wed Sep 30, 2009 12:59 am Post subject: Visio?

Hi Tim,



Here's mine, all done in Visio.........



I started off by importing Bob's CAD drawings and then converting them. I then went about "cleaning" up the less than perfect result and saving the individual components as "groups". After that, drag and drop and copy and paste works a charm in Visio.



Would you like a copy of the source?



Andrew.

---

Dual_Alt_-_8Amp_Backup_-_Split_Bus.pdf

Description:

Download

Filename:

Dual_Alt_-_8Amp_Backup_-_Split_Bus.pdf

Filesize:

762.81 KB

Downloaded:

1300 Time(s)

MauleDriver(at)nc.rr.com
Guest

Posted: Wed Sep 30, 2009 4:58 am Post subject: Visio?

I'm using that product too and like it a lot.  A belated Thanks Vern!



If anyone installs it and wants a sample, I'd be glad to share my 

schematics. (but you have to have the SCH tool installed to view it)



Bill



Vern Little wrote:

 	  Quote: 	
		   

 <rv-9a-online(at)telus.net>



 Hi Tim.

 Go here: www.vx-aviation.com and follow the link near the top of the 

 page for the free schematic software, library and design example from 

 my RV-9A. Doesn't have everything but it's very easy to create symbols 

 on the fly.



 Thanks,

 Vern Little



 --------------------------------------------------

 From: "Tim Andres" <tim2542(at)sbcglobal.net>

 Sent: Tuesday, September 29, 2009 9:37 PM

 To: <aeroelectric-list(at)matronics.com>

 Subject: Visio?



> 

> <tim2542(at)sbcglobal.net>

> Has anyone tried using Visio to draw their schematic? It looks like 

> it will

> work but I'm not finding much in the way of automotive symbols i.e.

> solenoids relays etc.

> Can anyone recommend a free or cheap program for this?

> Thanks, Tim Andres

>

kahuna

Joined: 02 Feb 2007
Posts: 93

Posted: Wed Sep 30, 2009 6:01 am Post subject: Visio?

My drawings all in visio here.

 http://mstewart.net/super8/visio/S8Panelandwiringr1.vsd

 

 or if you want to peruse the html version on a browser here.

 http://mstewart.net/super8/visio/n687msvisio_files.htm

 

 I keep the html version up so when Im on the raod with a problem, I can access all my connector pin outs and things.

 

 Enjoy,

 Mike

 

 

 [img]cid:1__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]"pestar" ---09/30/2009 04:38:29 AM-----> AeroElectric-List message posted by: "pestar" <peter(at)reivernet.com> jay(at)horriblehyde.com wrot

 

   [img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 From:[img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 "pestar" <peter(at)reivernet.com>  [img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 To:[img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 aeroelectric-list(at)matronics.com  [img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 Date:[img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 09/30/2009 04:38 AM  [img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 Subject:[img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 Re: Visio?  [img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 Sent by:[img]cid:2__=08BBFCD2DFDFE0358f9e8a93df938(at)us.ibm.com[/img]

 owner-aeroelectric-list-server(at)matronics.com  

 

 

 --> AeroElectric-List message posted by: "pestar" <peter(at)reivernet.com>

 

 

 jay(at)horriblehyde.com wrote:

 > I have used Visio a lot and re-drawn many of the symbols- I can let you have

 > my 'library page' if you'd like.

 > 

 > I use Visio a lot so I found it pretty useful to draw the schematics as

 > well.

 > 

 > Jay

 > 

 > --

 

 If you are able to make available your library of Visio symbols that would be appreciated.  I have a Visio one off aircraft symbols that I got of the net that I am happy to share (the file extension .VSS is not permitted for attachments) - contact to email.

 

 Regards 

 Peter Armstrong

 Auckland, New Zealand

 Building a French carbon fibre plane MCR-4S "www.dynaero.com"

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=265679#265679

 

 

 

 

 

 

 

 =====================================

 orum -

 tor?AeroElectric-List">http://www.matronics.com/Navigator?AeroElectric-List

 =====================================

 FORUMS -

 tp://forums.matronics.com

 =====================================

  Site -

 bsp;          -Matt Dralle, List Admin.

 bution">http://www.matronics.com/contribution

 =====================================

graycol.gif

Description:

Filesize:

105 Bytes

Viewed:

9701 Time(s)

ecblank.gif

Description:

Filesize:

45 Bytes

Viewed:

9701 Time(s)

jay(at)horriblehyde.com
Guest

Posted: Wed Sep 30, 2009 8:36 pm Post subject: Visio?

Nice and complete Andrew!

--

peter(at)sportingaero.com
Guest

Posted: Thu Oct 01, 2009 11:11 am Post subject: Visio?

Bill,



To make Visio drawings viewable by everyone save them as .jpg files (Save

as, and then scroll nearly to the bottom of the menu).



Peter



--

MauleDriver(at)nc.rr.com
Guest

Posted: Thu Oct 01, 2009 12:07 pm Post subject: Visio?

Some confusion here perhaps.  I'm not using Visio - rather I'm using the 

ExpressSCH product that Vern has linked to at his site.  It does have a 

bitmap export function which I just tried and attached the results. 



Looks like that works ok.



I've never used Visio.  I tried just using Powerpoint which I'm 

proficient in but didn't care for the results.   I tried Turbocad but 

found it to be overkill.



ExpressSCH is one half of a package that appears to support circuit 

board design and prototyping.  I found it simple to use. Part of it's 

attraction is that it 'knows' it is an electrical diagram so the overall 

design is consistent with the task at hand.



Bill "on the final lap of an RV10 panel" Watson

do not archive



Peter Pengilly wrote:

[quote] 



 Bill,



 To make Visio drawings viewable by everyone save them as .jpg files (Save

 as, and then scroll nearly to the bottom of the menu).



 Peter



 --

Main_Power_Distribution5.5.bmp

Description:

Filesize:

390.53 KB

Viewed:

9670 Time(s)

EIS_Sensors.bmp

Description:

Filesize:

390.53 KB

Viewed:

9670 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum