 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Phil.Perry(at)netapp.com
Guest
|
 Posted: Thu Oct 01, 2009 5:05 pm Post subject: Another QB 10 Issue - Longeron Length (again) |
 |
|
Since I found some mid-fuse longerons that were too long, I thought I’d double check the primary ones that attach to the tailcone. Checking the lengths on those was something I never thought about doing.
Good thing I did – or so I think.
Attached is a photo of the right side longeron. The line in the photo is where I believe the longeron should be cut (49 23/32”) per 29-2 Step #1. As you can see, the longerons are more than 4” too long.
Which brings me to two interesting questions.
<![if !supportLists]>1) <![endif]>For those of you who have slow-built and not attached to the tailcone yet; How far do yours stick out past the side skin? Is my mark close to right?
<![if !supportLists]>2) <![endif]>I wonder how many other folks missed this step and now have an RV-10 QB’s with the tailcone and fwd fuse attached at the wrong point.
Phil
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
123.68 KB |
| Viewed: |
2842 Time(s) |
|
|
|
| Back to top |
|
 |
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Fri Oct 02, 2009 2:41 am Post subject: Another QB 10 Issue - Longeron Length (again) |
|
|
Phil,
If I read your measurements correctly, I think you’re spot on. My tailcone is mounted, but it was easy to measure since that longeron is on top and not covered by a skin. My measurement was 2-7/16”.
Bob
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Perry, Phil
Sent: Thursday, October 01, 2009 9:01 PM
To: rv10-list(at)matronics.com
Subject: Another QB 10 Issue - Longeron Length (again)
Since I found some mid-fuse longerons that were too long, I thought I’d double check the primary ones that attach to the tailcone. Checking the lengths on those was something I never thought about doing.
Good thing I did – or so I think.
Attached is a photo of the right side longeron. The line in the photo is where I believe the longeron should be cut (49 23/32”) per 29-2 Step #1. As you can see, the longerons are more than 4” too long.
Which brings me to two interesting questions.
<![if !supportLists]>1) <![endif]>For those of you who have slow-built and not attached to the tailcone yet; How far do yours stick out past the side skin? Is my mark close to right?
<![if !supportLists]>2) <![endif]>I wonder how many other folks missed this step and now have an RV-10 QB’s with the tailcone and fwd fuse attached at the wrong point.
Phil
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
Phil.Perry(at)netapp.com
Guest
|
| Posted: Fri Oct 02, 2009 5:11 am Post subject: Another QB 10 Issue - Longeron Length (again) |
|
|
Thanks Bob…
I just threw the tape on there just to give you a sense of scale.
I went out and measured from the skins edge to the line and I’m 1/16” shorter than yours. I’ll add a 1/16th to it.
Just didn’t want to cut those things until I verified they really needed to be cut. That explains why they didn’t pre-drill those pilot holes for attachment too..
Thanks,
Phil
From: Bob Leffler [mailto:rv(at)thelefflers.com]
Sent: Friday, October 02, 2009 5:43 AM
To: rv10-list(at)matronics.com
Subject: RE: Another QB 10 Issue - Longeron Length (again)
Phil,
If I read your measurements correctly, I think you’re spot on. My tailcone is mounted, but it was easy to measure since that longeron is on top and not covered by a skin. My measurement was 2-7/16”.
Bob
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Perry, Phil
Sent: Thursday, October 01, 2009 9:01 PM
To: rv10-list(at)matronics.com
Subject: Another QB 10 Issue - Longeron Length (again)
Since I found some mid-fuse longerons that were too long, I thought I’d double check the primary ones that attach to the tailcone. Checking the lengths on those was something I never thought about doing.
Good thing I did – or so I think.
Attached is a photo of the right side longeron. The line in the photo is where I believe the longeron should be cut (49 23/32”) per 29-2 Step #1. As you can see, the longerons are more than 4” too long.
Which brings me to two interesting questions.
<![if !supportLists]>1) <![endif]>For those of you who have slow-built and not attached to the tailcone yet; How far do yours stick out past the side skin? Is my mark close to right?
<![if !supportLists]>2) <![endif]>I wonder how many other folks missed this step and now have an RV-10 QB’s with the tailcone and fwd fuse attached at the wrong point.
Phil
| Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
sportpilot
Joined: 03 Oct 2009
Posts: 2
Location: Waycross, Georgia
|
| Posted: Sat Oct 03, 2009 3:09 am Post subject: Re: Another QB 10 Issue - Longeron Length (again) |
|
|
I had to trim the longeron, but not that much. I cut off about one inch or less. possibly my kit had shorter longerons to begin with.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Claude
KAYS airport
Building RV 10 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
