recapen(at)earthlink.net Guest
|
Posted: Mon Nov 16, 2009 8:18 am Post subject: Oil cooler attachment bolts |
|
|
I have a SW 8406R oil cooler on my IO360B1F6 in my RV6A.
Temps are fine - even on hot summer days.
Three of the attachment bolts go through both sets of oil cooler flanges (and in to the back of the #4 baffle plate) with an aluminum tube providing support between the flanges. One of the bolts only goes through the 'forward' oil cooler flange and in to the baffle - per Vans oil cooler installation instructions.
I would like to add a Reiff Oil-Cooler-Heater on the side with the single bolt going through only one flange. It gets cold here on the DelMarVa peninsula in the winter. In order to do that, I would need to make the other bolt on that side go only through the 'forward' flange as well.
Does anyone know any reason that I shouldn't do this? Maybe you need pictures to figure out my description. I'll try to take some them to show.
Thanks,
Ralph
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|