Matronics Email Lists :: View topic - Upper Engine Mount Question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Upper Engine Mount Question

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

Scotsman

Joined: 27 Aug 2007
Posts: 89
Location: Johannesburg, South Africa

Posted: Fri Nov 20, 2009 12:36 am Post subject: Upper Engine Mount Question

Morning List, I am trying to finish up the upper engine mounts on my XL and specifically with reference to attachment to the firewall and upper longeron.



When I look at my plans etc I see that it is an old version of the engine mount that the plans etc provide instructions for.  Mine is the triangular shaped newer one.  Does anyone have the specs for the positions of any/all bolts/rivet holes that need to be made in the mount?



Many thanks in advance



James

_________________
Cell +27 83 675 0815

Afterfxllc(at)aol.com
Guest

Posted: Fri Nov 20, 2009 2:19 am Post subject: Upper Engine Mount Question

ask and you shall receive

  

 Jeff

aussiech650

Joined: 04 Oct 2009
Posts: 25
Location: Sydney, Australia

Posted: Fri Nov 20, 2009 2:47 am Post subject: Upper Engine Mount Question

Be careful with this drawing 6-B-6 the engine mounting hole positions were not correct for my aircraft, I back drilled through the firewall.  

     

Regards,  

   

   

Greg Cox  

Zenith Zodiac CH650, VH-ZDC  

Sydney, Australia (Cecil Hills)  

  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Afterfxllc(at)aol.com

 Sent: Friday, 20 November 2009 9:02 PM

 To: zenith-list(at)matronics.com

 Subject: Re: Upper Engine Mount Question  

  

  

     

ask and you shall receive  

    

   

    

Jeff  

  

       [quote][b]

Scotsman

Joined: 27 Aug 2007
Posts: 89
Location: Johannesburg, South Africa

Posted: Fri Nov 20, 2009 3:46 am Post subject: Re: Upper Engine Mount Question

Sorry can't see any attachment...j

_________________
Cell +27 83 675 0815

Scotsman

Joined: 27 Aug 2007
Posts: 89
Location: Johannesburg, South Africa

Posted: Fri Nov 20, 2009 5:21 am Post subject: Re: Upper Engine Mount Question

Greg can you send a picture?

_________________
Cell +27 83 675 0815

craig(at)craigandjean.com
Guest

Posted: Fri Nov 20, 2009 6:44 am Post subject: Upper Engine Mount Question

And the fit in that area in general is very tight. In particular between the nuts on the vertical bolts into the longeron and the rivets through the side skin and the longeron. If you can stagger the bolt and rivet positions.  

   

-- Craig  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Greg Cox

 Sent: Friday, November 20, 2009 3:44 AM

 To: zenith-list(at)matronics.com

 Subject: RE: Upper Engine Mount Question  

  

  

   

Be careful with this drawing 6-B-6 the engine mounting hole positions were not correct for my aircraft, I back drilled through the firewall.  

     

Regards,  

   

   

Greg Cox  

Zenith Zodiac CH650, VH-ZDC  

Sydney, Australia (Cecil Hills)  

  

       

From: owner-zenith-list-server(at)matronics.com [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Afterfxllc(at)aol.com

 Sent: Friday, 20 November 2009 9:02 PM

 To: zenith-list(at)matronics.com

 Subject: Re: Upper Engine Mount Question  

  

  

     

ask and you shall receive  

    

   

    

Jeff  

   	  Quote: 	
		    www.aeroelectric.com 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4 	  Quote: 	
		  	
5 	  Quote: 	
		  	
6 	  Quote: 	
		  	
7 	  Quote: 	
		  	
8

       [quote][b]

craig(at)craigandjean.com
Guest

Posted: Fri Nov 20, 2009 6:52 am Post subject: Upper Engine Mount Question

I forwarded Jeff's message directly to your e-mail address. Also sometimes

Matronics places a link at the bottom of the message to the attachment. Or

you can go to the web-based thread ("Read this topic online here") and there

will be a link and thumbnail for the attachment.



-- Craig



--

craig(at)craigandjean.com
Guest

Posted: Fri Nov 20, 2009 7:24 am Post subject: Upper Engine Mount Question

James, I got a bounce on your e-mail address:

james.roberts(at)computershare.co.za



This message was created automatically by mail delivery software.



A message that you sent could not be delivered to one or more of its

recipients. This is a permanent error. The following address(es) failed:



  james.roberts(at)computershare.co.za

    SMTP error from remote mail server after RCPT

TO:<james.roberts(at)computershare.co.za>:

    host mailgateza.computershare.co.za [196.14.50.3]:

    550 5.7.1 Unknown recipient <james.roberts(at)computershare.co.za> was

submitted by host <166.70.13.232>. Sender address was

<craig(at)craigandjean.com>.



------ This is a copy of the message, including all the headers. ------

------ The body of the message is 147334 characters long; only the first

------ 106496 or so are included here.



Return-path: <craig(at)craigandjean.com>

Received: from mta1.zcs.xmission.com ([166.70.13.65])

	by out02.mta.xmission.com with esmtp (Exim 4.69)

	(envelope-from <craig(at)craigandjean.com>)

	id 1NBUjJ-0003rr-Vn

	for james.roberts(at)computershare.co.za; Fri, 20 Nov 2009 07:44:58

-0700

Received: from delld820craig (craig-payne.dsl.xmission.com [166.70.39.121])

	by mta1.zcs.xmission.com (Postfix) with ESMTP id E487E1289E0

	for <james.roberts(at)computershare.co.za>; Fri, 20 Nov 2009 07:44:38

-0700 (MST)

From: "Craig Payne" <craig(at)craigandjean.com>

To: "'Scotsman'" <james.roberts(at)computershare.co.za>

Subject: FW: Upper Engine Mount Question

Date: Fri, 20 Nov 2009 07:44:44 -0700

Message-ID: <001401ca69f0$007c15c0$01744140$(at)com>

MIME-Version: 1.0

Content-Type: multipart/mixed;

	boundary="----=_NextPart_000_0015_01CA69B5.541D3DC0"

X-Mailer: Microsoft Office Outlook 12.0

Thread-Index: Acppy2qH1xImae5GSdyjUkhrWQF/SQAJHC0Q

Content-Language: en-us



This is a multi-part message in MIME format.



Content-Type: multipart/alternative;

	boundary="----=_NextPart_001_0016_01CA69B5.541D3DC0"

------=_NextPart_001_0016_01CA69B5.541D3DC0

Content-Type: text/plain;

	charset="us-ascii"

Content-Transfer-Encoding: 7bit



Sending direct.



 



-- Craig



--

aussiech650

Joined: 04 Oct 2009
Posts: 25
Location: Sydney, Australia

Posted: Sun Nov 22, 2009 1:05 am Post subject: Upper Engine Mount Question

I have sent an email directly to your inbox.



Regards,

Greg Cox

Zenith Zodiac CH650, VH-ZDC

Sydney, Australia (Cecil Hills)



--

aussiech650

Joined: 04 Oct 2009
Posts: 25
Location: Sydney, Australia

Posted: Sun Nov 22, 2009 1:09 am Post subject: Upper Engine Mount Question

Hi,

I can't get through on your email address can you confirm that it is

james.roberts(at)computershare.co.za



Regards,

Greg Cox

Zenith Zodiac CH650, VH-ZDC

Sydney, Australia (Cecil Hills)

--

Scotsman

Joined: 27 Aug 2007
Posts: 89
Location: Johannesburg, South Africa

Posted: Fri Nov 27, 2009 3:12 am Post subject: Re: Upper Engine Mount Question

Sorry should update my profile - james.roberts(at)kpmg.co.za 



I would appreciate it if you could resend.  Thanks guys

_________________
Cell +27 83 675 0815

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum