 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jchang10
Joined: 05 Jul 2006
Posts: 227
|
 Posted: Fri Dec 11, 2009 3:52 pm Post subject: Front Baffle screw access |
 |
|
This is my 3rd attempt. sorry for any repeat posts.
How did you guys get access to the screws that hold the front baffle, right underneath the prop governor? I am still trying to figure out how to drill it, let alone get a screw driver to it.
Hopefully, the image was attached okay below!
Also, are there any recommendations for exactly how to align the CB-1001A baffle in relation to the cowl? The plans don't give much info here. The plans also don't seem to indicate any baffle material for this area. I am wondering if I shoot for a tight fit or leave a gap for the cowl to come on and off?
Thanks!
Jae
40533
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
52.43 KB |
| Viewed: |
1746 Time(s) |
|
|
|
| Back to top |
|
 |
dlm46007(at)cox.net
Guest
|
| Posted: Fri Dec 11, 2009 5:43 pm Post subject: Front Baffle screw access |
|
|
A 90 angle drill and short threaded drill bits. Why hot put SS cap screws in
there with an Allen wrench.
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Fri Dec 11, 2009 6:23 pm Post subject: Front Baffle screw access |
|
|
I second the angle drill. Also, I use a #3 bolt & a universal socket.
Do not archive
Jesse Saint
Saint Aviation
jesse(at)saintaviation.com
352-427-0285
Sent from my iPhone
On Dec 11, 2009, at 8:40 PM, "DLM" <dlm46007(at)cox.net> wrote:
[quote]
A 90 angle drill and short threaded drill bits. Why hot put SS cap
screws in
there with an Allen wrench.
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jchang10
Joined: 05 Jul 2006
Posts: 227
|
| Posted: Sat Dec 12, 2009 11:03 am Post subject: Front Baffle screw access |
|
|
ok, thanks for the replies. looks like i'll replace that screw with
something easier to access.
jae
40533
do not archive
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
