Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Door safety latch
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Jim Berry

Joined: 10 Jan 2006
Posts: 237
Location: Denver

Posted: Thu Jan 14, 2010 5:09 pm Post subject: Door safety latch

Van's has issued a service bulletin for their new door safety latch, which I installed 2 weeks ago. They have started shipping parts kits to those flying and those who have purchased finish kits. See attached link or go to Van's website.



The latch works very nicely and can also be used to pull the door inward while closing the door handle.



Jim Berry

40482

N15JB

sb10-1-4.pdf

Description:

Door latch service bulletin

Download

Filename:

sb10-1-4.pdf

Filesize:

34.03 KB

Downloaded:

284 Time(s)

Ron B.

Joined: 17 Feb 2009
Posts: 103
Location: Nova Scotia

Posted: Thu Jan 14, 2010 5:29 pm Post subject: Re: Door safety latch

Any pictures or install drawings you can share?

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Thu Jan 14, 2010 5:38 pm Post subject: Door safety latch

Jim,



Can you post a picture of the new latch?



Thanks,



bob



--

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

dlm46007(at)cox.net
Guest

Posted: Thu Jan 14, 2010 5:39 pm Post subject: Door safety latch

Anybody have the section 45A? 



--

Jim Berry

Joined: 10 Jan 2006
Posts: 237
Location: Denver

Posted: Thu Jan 14, 2010 5:41 pm Post subject: Re: Door safety latch

It looks very much like the Staniforth latch in the archives. I will take some pictures when I am out at the hangar tomorrow. My drawings are also at the hangar right now. With a little care, there should be no problem installing in a finished and painted door.



Jim Berry

40482

N15JB

Jim Berry

Joined: 10 Jan 2006
Posts: 237
Location: Denver

Posted: Fri Jan 15, 2010 11:13 am Post subject: Re: Door safety latch

Attached are photos of the new door safety latch, which I think are self explanatory. It is my understanding that everyone with a finish kit will have their parts and drawings by the end of next week. The only thing I would consider changing is to increase the angle between the legs of the springs that you will fabricate. My personal preference would be for a stronger spring loading of the latch. I don't have a way to scan the large format drawings, but will try to photograph them and get them posted later today.



Jim Berry

40482

N15JB

IMG_0441.jpg

Description:

Door latch 4

Filesize:

22.49 KB

Viewed:

10907 Time(s)

IMG_0440.jpg

Description:

Door latch 3

Filesize:

30.92 KB

Viewed:

10907 Time(s)

IMG_0439.jpg

Description:

Door latch 2

Filesize:

41.38 KB

Viewed:

10907 Time(s)

IMG_0438.jpg

Description:

Door safety latch

Filesize:

47.77 KB

Viewed:

10907 Time(s)

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Fri Jan 15, 2010 11:30 am Post subject: Re: Door safety latch

Thanks Jim,



NO pressure there was there?

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

bwestfall

Joined: 22 Oct 2008
Posts: 131
Location: Portland, OR

Posted: Fri Jan 15, 2010 12:01 pm Post subject: Door safety latch

Who's going to be the first vendor to make the door safety latch kit parts

available with various stylistic improvements!!!  Come on you know that hook

looks so utilitarian... dare I say Dutch!   



What about warning lights, switches, buzzers... oh my!!



Tounge in cheek of course.



-Ben Westfall

do not archive

--

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Fri Jan 15, 2010 12:11 pm Post subject: Re: Door safety latch

When you are inside of the plane and want to open the door, how do you open the latch?  Do you grab the edge of it.  What am I missing here?  Oh ya and you are on fire!

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Fri Jan 15, 2010 12:51 pm Post subject: Door safety latch

I for one would like something that would make that lever on the outside a little more streamlined and less ugly.  This should be fun with my already covered doors. 



Michael



--

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Fri Jan 15, 2010 12:59 pm Post subject: Door safety latch

Hmmm



At least the Staniforth design had provision for opening on the interior. I

could see this getting jammed closed in the event of an accident - or at

least being very difficult to open.



What would really be nice would be the ability to open the door using the

main door handle and having this keep the door *slightly* ajar prior to an

off-field landing. On my Cherokee, part of the off field checklist is to

unlatch and unlock the door so it does not wedge shut in the event of an

accident.



Not knowing how tight this will hold the door, I am wondering if we are

trading on problem for another.



Cheers



Les

Do Not Archive



--

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Fri Jan 15, 2010 12:59 pm Post subject: Door safety latch

I agree its double ugly!



Deems Davis



RV Builder (Michael Sausen) wrote:

[quote] 



   I for one would like something that would make that lever on the outside a little more streamlined and less ugly.  This should be fun with my already covered doors. 



 Michael



 --

rv10builder(at)verizon.ne
Guest

Posted: Fri Jan 15, 2010 1:13 pm Post subject: Door safety latch

my thoughts exactly!

Pascal



--------------------------------------------------

From: "RV Builder (Michael Sausen)" <rvbuilder(at)sausen.net>

Sent: Friday, January 15, 2010 12:48 PM

To: <rv10-list(at)matronics.com>

Subject: RE: Re: Door safety latch



[quote] 

 <rvbuilder(at)sausen.net>



  I for one would like something that would make that lever on the outside 

 a little more streamlined and less ugly.  This should be fun with my 

 already covered doors. 



 Michael



 --

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Fri Jan 15, 2010 1:14 pm Post subject: Door safety latch

But Deems,



Your -10 is way too pretty anyway.



I will duck for cover now...



Les 



--

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Fri Jan 15, 2010 1:22 pm Post subject: Door safety latch

What about attaching a 'grab strap' to the inside door catch? It would 

serve for both opening and closing the doors from the inside?



Deems Davis

N519PJ

www.deemsrv10.com



Les Kearney wrote:

[quote] 



 Hmmm



 At least the Staniforth design had provision for opening on the interior. I

 could see this getting jammed closed in the event of an accident - or at

 least being very difficult to open.



 What would really be nice would be the ability to open the door using the

 main door handle and having this keep the door *slightly* ajar prior to an

 off-field landing. On my Cherokee, part of the off field checklist is to

 unlatch and unlock the door so it does not wedge shut in the event of an

 accident.



 Not knowing how tight this will hold the door, I am wondering if we are

 trading on problem for another.



 Cheers



 Les

 Do Not Archive



 --

Phil.Perry(at)netapp.com
Guest

Posted: Fri Jan 15, 2010 1:22 pm Post subject: Door safety latch

I'm thinking of playing games with the color scheme. (Aka: alodine every other layer. Or alodine one layer darker than the other.)

 

 Or even anodizing with a color that complements the interior.

 

 I'm sure we'll have some machined versions soon though.

 

 Phil

 

 

 

 ---

jchang10

Joined: 05 Jul 2006
Posts: 227

Posted: Fri Jan 15, 2010 1:35 pm Post subject: Door safety latch

http://www.glenrowanrestaurant.co.uk/loch_ness_monster.jpg



I saw this scottish influence personally. Anybody else see the 

resemblance? I'm going to call it the Nessie Latch.



Jae

40533



Perry, Phil wrote:

[quote]

 I'm thinking of playing games with the color scheme. (Aka: alodine 

 every other layer. Or alodine one layer darker than the other.)



 Or even anodizing with a color that complements the interior.



 I'm sure we'll have some machined versions soon though.



 Phil



 ---

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011

pitts_pilot(at)bellsouth.
Guest

Posted: Fri Jan 15, 2010 2:03 pm Post subject: Door safety latch

I find it rather ludicrous to build an efficient airplane only to hang 

the handle and a speed brake on the outside of the door.  IMHO, it's a 

poor solution at best.

Linn



Jim Berry wrote:

 	  Quote: 	
		   

 

 Attached are photos of the new door safety latch, which I think are self explanatory. It is my understanding that everyone with a finish kit will have their parts and drawings by the end of next week. The only thing I would consider changing is to increase the angle between the legs of the springs that you will fabricate. My personal preference would be for a stronger spring loading of the latch. I don't have a way to scan the large format drawings, but will try to photograph them and get them posted later today.

 

 Jim Berry

 40482

 N15JB

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p 81668#281668

 

 

 

 

 Attachments: 

 

 http://forums.matronics.com//files/img_0441_836.jpg

 http://forums.matronics.com//files/img_0440_915.jpg

 http://forums.matronics.com//files/img_0439_172.jpg

 http://forums.matronics.com//files/img_0438_137.jpg

scottmschmidt(at)yahoo.co
Guest

Posted: Fri Jan 15, 2010 2:31 pm Post subject: Door safety latch

(I posted this at VAF, I also am not very impressed)



I am going to have to think about this SB before installing.   

 It would have been nice to talk with the whole community of RV-10 builders before launching this SB. I do not feel it is necessary and is just an extra device that if not installed properly will not function correctly I would suspect. If you drive to root cause on the door issue it comes down to people not installing the warning lights, and not properly completing their pre-flight. 

 

 I don't want to offend anyone that has had their door come off but I have heard many stories about the doors that have come off, especially the one that hit the horizontal stabilizer and there were many other factors involved with that incident. Most of them will admit that the door was never fully closed before taking off. All of them should have been prevented through proper preflight and checklists. 

 

 If the current system is installed correctly, the indicator lights installed, it is very unlikely and almost impossible to have a problem. The only way for the door to open is if you squeezed the interlock on the handle and opened the door. I know there are many RV-10's flying around with no indicator lights on the doors and I don't understand why. They work so great. On my doors if the pin moves 1/8" away from fully closed the lights come on. 

 

 My preflight includes the following: 

 -Confirm door handle has locked into place

 -Check all four corners for any obvious gap

 -Check door ajar light

 -Before takeoff, check all warning lights (includes the door ajar light)

 

 If the proximity sensors are installed correctly it is IMPOSSIBLE not to have each of the four pins in their proper spot. If one is caught outside the cabin (which has happened to me when passengers try to shut the door before I get there) the light is on and there is an obvious gap. 

 

 Another concern I read about is the handle not locking into place. If yours does not, take it apart and fix it. Once mine snaps into place it will not rotate and is very safe. 

 

 I may find that this is a great addition after I have played with someones door that has this new addition but I won't be adding this to my experimental plane anytime soon. I worry about emergencies and having someone on the outside who is trying to get me and my family out try to understand that you have to lift the little handle, push the button and rotate the handle. 

 

 I agree that the door can be improved but this is a very poor band-aid. I don't want to get flamed here, I just want new builders to understand that the doors are not unsafe and if installed correctly with the warning lights and properly locking handles they are safe. New builders have this perception that the doors need a 100% redesign, and I don't want anyone to be scared off. 

Scott Schmidtscottmschmidt(at)yahoo.com



From: Linn Walters <pitts_pilot(at)bellsouth.net>

To: rv10-list(at)matronics.com

Sent: Fri, January 15, 2010 3:01:38 PM

Subject: Re: Re: Door safety  latch



 --> RV10-List message posted by: Linn Walters <pitts_pilot(at)bellsouth.net (pitts_pilot(at)bellsouth.net)>



I find it rather ludicrous to build an efficient airplane only to hang the handle and a speed brake on the outside of the door.  IMHO, it's a poor solution at best.

Linn



Jim Berry wrote:

[quote] --> RV10-List message posted by: "Jim Berry" <jimberry(at)qwest.net (jimberry(at)qwest.net)>

 

 Attached are photos of the new door safety latch, which I think are self explanatory. It is my understanding that everyone with a finish kit will have their parts and drawings by the end of next week. The only thing I would consider changing is to increase the angle between the legs of the springs that you will fabricate. My personal preference would be for a stronger spring loading of the latch. I don't  have a way to scan the large format drawings, but will try to photograph them and get them posted later today.

 

 Jim Berry

 40482

 N15JB

 

 

 

 

 Read this topic online here:

 

 [url=http://forums.matronics.com/viewtopic.php?p 81668#281668]http://forums.matronics.com/viewtopic.php?p 81668#281668[/url]

 

 

 

 

 Attachments: 

 http://forums.matronics.com//files/img_0441_836.jpg

 http://forums.matronics.com//files/img_0440_915.jpg

 http://forums.matronics.com//files/img_0439_172.jpg

  

  	  Quote: 	
		  [b]

gommone7(at)bellsouth.net
Guest

Posted: Fri Jan 15, 2010 2:31 pm Post subject: Door safety latch

My spy inside Van's just send me the revision for the SB come out yesterday,will looking more efficient then the parachute of the outside lever of the previews SB

Any way I thinks I will adop this one

Hugo --- 



On Fri, 1/15/10, Linn Walters <pitts_pilot(at)bellsouth.net> wrote:


 	  Quote: 	
		   From: Linn Walters <pitts_pilot(at)bellsouth.net>

 Subject: Re: Re: Door safety latch

 To: rv10-list(at)matronics.com

 Date: Friday, January 15, 2010, 5:01 PM

 

 Linn Walters <pitts_pilot(at)bellsouth.net>

 

 I find it rather ludicrous to build an efficient airplane

 only to hang the handle and a speed brake on the outside of

 the door.  IMHO, it's a poor solution at best.

 Linn

 

 Jim Berry wrote:

 > 

 > 

 > Attached are photos of the new door safety latch,

 which I think are self explanatory. It is my understanding

 that everyone with a finish kit will have their parts and

 drawings by the end of next week. The only thing I would

 consider changing is to increase the angle between the legs

 of the springs that you will fabricate. My personal

 preference would be for a stronger spring loading of the

 latch. I don't have a way to scan the large format drawings,

 but will try to photograph them and get them posted later

 today.

 > 

 > Jim Berry

 > 40482

 > N15JB

 > 

 > 

 > 

 > 

 > Read this topic online here:

 > 

 > http://forums.matronics.com/viewtopic.php?p=281668#281668

 > 

 > 

 > 

 > 

 > Attachments: 

 > http://forums.matronics.com//files/img_0441_836.jpg

 > http://forums.matronics.com//files/img_0440_915.jpg

 > http://forums.matronics.com//files/img_0439_172.jpg

 > http://forums.matronics.com//files/img_0438_137.jpg

========================

                	


 	  Quote: 	
		                 -Matt

 D==============

RV10_SB_improve.jpg

Description:

Filesize:

108.86 KB

Viewed:

10859 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum