Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

RV10-List:Nose wheel breakout force

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
speckter(at)comcast.net
Guest





PostPosted: Fri Feb 05, 2010 5:11 am    Post subject: RV10-List:Nose wheel breakout force Reply with quote

In my many years with castering nose wheels on Grummans, Glasairs, and
Glastars, I have found that the only penalty for getting the nut too tight
on the Bellevue washers is that it is hard to turn while slow taxiing. The
penalty for too loose is to destroy the nose wheel pant and possibly destroy
the nose gear mountings if you get shimmy on take off and landing.

Do not be afraid to get the torque up to the next hole after you have
achieved the required breakout force. The downside is so slight. It is my
opinion if you can turn the nose wheel with the prop, you are either very
strong or have your breakout force too low.

Gary Specketer


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
robin1(at)mrmoisture.com
Guest





PostPosted: Fri Feb 05, 2010 7:28 am    Post subject: RV10-List:Nose wheel breakout force Reply with quote

I opt for Very Strong.
Also of note the -10 is a lot heavier than the aircraft you mentioned. A
little nudge while rolling can easily shift the nose wheel in the
desired direction. But again I am exceptionally strong. I mean
freakishly strong. All I have to do is pull back on the control stick
and I can lift the entire plane off the runway.

Robin
Do Not Archive

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
ricksked(at)cox.net
Guest





PostPosted: Fri Feb 05, 2010 7:45 am    Post subject: RV10-List:Nose wheel breakout force Reply with quote

Hopefully you mean while it's going 65 kts and rolling down the
runway?....Funny stuff!!

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group