 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Harvey Richards
Joined: 26 Aug 2008
Posts: 39
Location: Nova Scotia
|
 Posted: Wed Feb 10, 2010 3:00 am Post subject: Pitch control rod length |
 |
|
When setting up the pitch control rod,have you used the length in the plans,685mm which would put the horizontal tail bellcrank at approx 75 degrees when the stick is at 90, or are they both at 90 degrees then the length should be approx 625mm. Thanks.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
CH 701 |
|
| Back to top |
|
 |
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
| Posted: Wed Feb 10, 2010 5:02 am Post subject: Pitch control rod length |
|
|
Harvey, attached is a document that I got From Jon Croke. It originally came from Caleb (at the factory) I believe. It might help clear up your issues.
By the way, this did not help me at all and I ended up cutting the belcrank off of the torque tube and solidly mounting it to the airframe. Sorry guys, I'm not going to share any pictures of that because I'm not happy with it yet.
Doug MacDonald
CH-701 scratch builder
Final details
NW Ontario, Canada
--- On Wed, 2/10/10, Harvey Richards <lisa.richards(at)ns.sympatico.ca> wrote:
| Quote: | From: Harvey Richards <lisa.richards(at)ns.sympatico.ca>
Subject: Pitch control rod length
To: zenith701801-list(at)matronics.com
Received: Wednesday, February 10, 2010, 5:00 AM
--> Zenith701801-List message
posted by: "Harvey Richards" <lisa.richards(at)ns.sympatico.ca>
When setting up the pitch control rod,have you used the
length in the plans,685mm which would put the horizontal
tail bellcrank at approx 75 degrees when the stick is at 90,
or are they both at 90 degrees then the length should be
approx 625mm. Thanks.
--------
CH 701
|
__________________________________________________________________
Connect with friends from any web browser - no download required. Try the new Yahoo! Canada Messenger for the Web BETA at http://ca.messenger.yahoo.com/webmessengerpromo.php
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
Download |
| Filename: |
Rigging_Elevator_Controls.pdf |
| Filesize: |
23.55 KB |
| Downloaded: |
472 Time(s) |
|
|
| Back to top |
|
|
Harvey Richards
Joined: 26 Aug 2008
Posts: 39
Location: Nova Scotia
|
| Posted: Wed Feb 10, 2010 5:51 am Post subject: Re: Pitch control rod length |
|
|
Thanks Doug. That makes more sense than having both at 90 degrees as the cables have to go to the top of the fuse ans should be equal lengths as I see it.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
CH 701 |
|
| Back to top |
|
|
Tommy Walker
Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207
|
| Posted: Thu Feb 11, 2010 7:22 am Post subject: Re: Pitch control rod length |
|
|
I tried to follow Caleb's suggestion too. And for the most part it worked. Just be sure to fit the pitch control rod last. I think I had to cut about 15 mm of the end to get the 30 mm slot right.
I still get elevator cable tension of 30 lbs when I move the stick to the side. I am going to try 10 lbs and see if that helps.
Tommy Walker in Alabama
N8701T
Taxi Test: http://www.youtube.com/watch?v=zcm9jtX2Mrg
| Harvey Richards wrote: | | When setting up the pitch control rod,have you used the length in the plans,685mm which would put the horizontal tail bellcrank at approx 75 degrees when the stick is at 90, or are they both at 90 degrees then the length should be approx 625mm. Thanks. |
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
Tommy Walker
N25A - Anniston, AL |
|
| Back to top |
|
|
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
| Posted: Thu Feb 11, 2010 7:54 am Post subject: Pitch control rod length |
|
|
Tommy, does your top elevator cable clear the top of the channel that supports the back end of the torque tube? The main reason that I went with a separate bell crank was that my cable was seriously rubbing on the channel. I now have a good inch of clearance.
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Do not archive
--- On Thu, 2/11/10, Tommy Walker <twalker(at)cableone.net> wrote:
| Quote: | From: Tommy Walker <twalker(at)cableone.net>
Subject: Re: Pitch control rod length
To: zenith701801-list(at)matronics.com
Received: Thursday, February 11, 2010, 9:22 AM
--> Zenith701801-List message
posted by: "Tommy Walker" <twalker(at)cableone.net>
I tried to follow Caleb's suggestion too. And for the
most part it worked. Just be sure to fit the pitch
control rod last. I think I had to cut about 15 mm of
the end to get the 30 mm slot right.
I still get elevator cable tension of 30 lbs when I move
the stick to the side. I am going to try 10 lbs and
see if that helps.
Tommy Walker in Alabama
N8701T
Taxi Test: http://www.youtube.com/watch?v=zcm9jtX2Mrg
Harvey Richards wrote:
> When setting up the pitch control rod,have you used
the length in the plans,685mm which would put the horizontal
tail bellcrank at approx 75 degrees when the stick is at 90,
or are they both at 90 degrees then the length should be
approx 625mm. Thanks.
--------
Tommy Walker
N8701 - Anniston, AL
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 85944#285944
Zenith701801-List Email Forum -
FAQ,
- MATRONICS WEB FORUMS -
List Contribution Web Site -
-Matt
Dralle, List Admin.
|
__________________________________________________________________
Make your browsing faster, safer, and easier with the new Internet Explorer® 8. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
Tommy Walker
Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207
|
| Posted: Thu Feb 11, 2010 7:26 pm Post subject: Re: Pitch control rod length |
|
|
Doug,
I responded to this, but I must have done something wrong as my comments do not appear.
Yes, we have clearance of the top cable over the back of the channel. Not much, but it does clear.
I like your idea of the separate control.
Tommy Walker in Alabama
| dougsnash wrote: | Tommy, does your top elevator cable clear the top of the channel that supports the back end of the torque tube? The main reason that I went with a separate bell crank was that my cable was seriously rubbing on the channel. I now have a good inch of clearance.
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Do not archive
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
Tommy Walker
N25A - Anniston, AL |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
