Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

oil filter #

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
gilbey69(at)bellsouth.net
Guest





PostPosted: Sat Feb 20, 2010 2:53 pm    Post subject: oil filter # Reply with quote

listers,just returned back to flying kitfoxs again,after a number of years,i use to use oil; filters from NAPA and FRAM,also from car quest, can anyone on the list give me the correct oil filter numbers for the right filters to use on the 912 engines,i can not remmber them after 15 years of not using them, thanks all
frank goggio
912 speedster
wilmington nc
[quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
vetdrem



Joined: 20 Nov 2007
Posts: 62

PostPosted: Sat Feb 20, 2010 4:47 pm    Post subject: Re: oil filter # Reply with quote

I think that a FRAM 1056 or Carquest 85056 are two that will work.

I hope that you are wearing a flack jacket, the purists are going to get you. Personally, I am not afraid that a non-rotax filter will turn your day to s###, but others are sure that the world will end.

There was a comparison posted "somewhere" (I can't find it now) that tested 6 or 7 different filters for particle size, by-pass relief pressure, physical size, and a few other things. What I took from the comparison was that rotax is not the only filter that will do a great job of protecting your engine, but it is the only one that maintains the warranty if that is a concern.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
Av8r3400



Joined: 22 Sep 2008
Posts: 83
Location: North Central Wisconsin (KRRL)

PostPosted: Sat Feb 20, 2010 4:48 pm    Post subject: Re: oil filter # Reply with quote

This may very well be a "can of worms" topic!

The Rotax people have been very big lately on pushing their own filter due to it's housing's pressure capacity and bypass valve pressure settings. On cold starts and during normal operations, they are claiming that the "aftermarket" filters are either failing at the housing or their by-pass valves (if equipped) are opening allowing unfiltered oil to circulate through the system.

But there sure are a lot of 912s running just fine with a filter that says "NAPA" or "FRAM" on the outside. I don't know.

In my opinion using a $25 filter to save your $20k engine from possible failure is a "no brainer" decision for me... Cheap insurance.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Thanks,
Av8r3400

Kitfox Model IV-1200 W/912UL & IVO
Kitfox Model IV-1050 W/912UL & Warp
YouTube Videos
Back to top
View user's profile Send private message Send e-mail Visit poster's website
gilbey69(at)bellsouth.net
Guest





PostPosted: Sat Feb 20, 2010 6:12 pm    Post subject: oil filter # Reply with quote

thanks guys,for the infor,i l used napa and fram on my former speedster
about 4 years,never a problem,of course that was about in 93.if i remmber
right perolator makes the rotax filter in there overseas plant,no problem
with the warrenty on this engine, thats long been gone,i to remember a
comparison on filters way back,did not seen to be much different, to me
thats like a car dealer telling me i got to use only his dealership,mileage
may very,but i got this engine with 800hrs on it, compression still
79/80,all cylinders,runs like a sewing machine,had wicks filter on it,and
where it came from i dought it ever had a rotax filter other then what it
came with,
frank goggio
912 speedster
wilmington nc


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group