dougsnash
Joined: 14 Apr 2008
Posts: 281
|
 Posted: Wed Feb 24, 2010 6:03 pm Post subject: H-Stab mounting brackets (Was Progress pictures) |
 |
|
John, have you verified the thickness of you front H-Stab mounts? I had to open up my H-stab and upgrade from the 040 originally in my plans to the 063 in the newer plans.
I ask because your kit/plans and my plans are from approximately the timeframe(if I remember correctly).
Doug MacDonald
CH-701 Scratch Builder
NW Ontario, Canada
C-GBQX
Do Not Archive
--- On Wed, 2/24/10, John Marzulli <john.marzulli(at)gmail.com> wrote:
| Quote: | From: John Marzulli <john.marzulli(at)gmail.com>
Subject: Progress pictures ( aka I have the most understanding wife ever )
To: zenith701801-list(at)matronics.com
Received: Wednesday, February 24, 2010, 1:58 PM
Space is pretty tight in my garage. The
get the plane to fit with the engine the door from the
garage into the house had to be removed.
A while ago I found that the forward mount points for
my horizonal stabilizer were 10mm to far inboard to mount to
the fuselage. I ended up unzipping the entire structure and
was able to get them moved out. The angle got reamed out a
bit, so I took the holes/rivets up to A6 to be safe.
I don't have h-stab truly mounted yet, just
clamped on.
http://marzulliphoto.net/Airplanes/Horizontal-Stabilizer-Mount/11330098_rf44T#795527284_Nhocd
John Marzulli
|
__________________________________________________________________
The new Internet Explorer® 8 - Faster, safer, easier. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
