|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Jerry Grimmonpre'
Joined: 09 Jan 2006 Posts: 144 Location: Huntley, Illinois 60142
|
Posted: Mon Apr 17, 2006 11:44 am Post subject: Wire length vs. fuse size |
|
|
Bob ...
If a load of 15A is fed with a 12 foot length of wire, is an inline fuse
used in this situation? Is the fuse size increased to accommodate the wire
length? What size fuse would be needed? This wire will feed the endurance
bus from the aft battery lug (bypassing the aft contactor) as a continuous
backup source of power.
Thanks ...
Jerry Grimmonpre'
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
lhelming(at)sigecom.net Guest
|
Posted: Mon Apr 17, 2006 2:59 pm Post subject: Wire length vs. fuse size |
|
|
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
flyboy.bob(at)gmail.com Guest
|
Posted: Mon Apr 17, 2006 4:14 pm Post subject: Wire length vs. fuse size |
|
|
Jerry.
It seems to me that if you are going to fuse it for 20A you need to
size the wire for 20A also what you are protecting is an overload on
the wire! . . . 12 ft isn't going to be a huge deal . . . if you are
concerned go up one size.
Good Luck,
Bob in SE Iowa
On 4/17/06, LarryRobertHelming <lhelming(at)sigecom.net> wrote:
[quote]
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
Wes Bunker
Joined: 10 Jan 2006 Posts: 5 Location: Lincoln, CA
|
Posted: Tue Apr 18, 2006 12:07 pm Post subject: Re: Wire length vs. fuse size |
|
|
Jerry, fuse size is not based on wire length, but wire gage, or diameter. You can find the fuse size to wire size assignment in AC43.13-1B on page 11-15 in Table 11-3. Remember, first you determine MINIMUM wire size as described in section 5, and then the MAXIMUM fuse size per section 4.
Have fun!
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ Wes
N7337G
C172K |
|
Back to top |
|
|
Jerry Grimmonpre'
Joined: 09 Jan 2006 Posts: 144 Location: Huntley, Illinois 60142
|
Posted: Tue Apr 18, 2006 2:36 pm Post subject: Wire length vs. fuse size |
|
|
Do Not Archive
My thanks to the list ...
I've got a 10 AWG wire and 20A inline fuse designed into the mix. I'm on my
way to ordering lots of electrical stuff.
Jerry Grimmonpre'
RV8A
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|