 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
william(at)gbta.net
Guest
|
 Posted: Sat Mar 13, 2010 9:58 pm Post subject: RV-10 Cutaway Drawing |
 |
|
Any new news on the RV-10 cutaway?
Bill
From: Bob Leffler (rv(at)thelefflers.com)
Sent: Sunday, February 07, 2010 1:54 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RV-10 Cutaway Drawing
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:AAEC97574919436DA94C93042DA5105B(at)BrittonPC[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ...$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
1192 Time(s) |
|
|
|
| Back to top |
|
 |
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Sun Mar 14, 2010 4:53 am Post subject: RV-10 Cutaway Drawing |
|
|
You need to ask Tom at tjtechart(at)comcast.net (tjtechart(at)comcast.net). I suspect we haven’t met the minimum number of pre-orders yet or Tom would have posted something.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Billy & Tami Britton
Sent: Saturday, March 13, 2010 11:55 PM
To: rv10-list(at)matronics.com
Subject: Re: RV-10 Cutaway Drawing
Any new news on the RV-10 cutaway?
Bill
From: Bob Leffler (rv(at)thelefflers.com)
Sent: Sunday, February 07, 2010 1:54 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RV-10 Cutaway Drawing
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:image001.jpg(at)01CAC351.4E8692D0[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ...$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
1187 Time(s) |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
