Matronics Email Lists :: View topic - Cleveland Static Ports and 1/4 ID to 1/4 OD

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Cleveland Static Ports and 1/4 ID to 1/4 OD

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

sean(at)stephensville.com
Guest

Posted: Mon Apr 19, 2010 6:36 pm Post subject: Cleveland Static Ports and 1/4 ID to 1/4 OD

For those that have the Cleaveland static ports, what have you done to 

transfer from the 1/4 ID tubing that the ports need to the 1/4 OD tubing 

that most everything else uses?  The Cleaveland installation 

instructions mention to just slide the 1/4 OD into the 1/4 ID, but that 

doesn't sound like it would be optimal for a leak free transition.



thanks,



Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bcondrey

Joined: 03 Apr 2006
Posts: 580

Posted: Tue Apr 20, 2010 5:06 am Post subject: Cleveland Static Ports and 1/4 ID to 1/4 OD

I used 1/4" ID Tygon between the static ports up to a 1/4" tee fitting secured to the mid-point on the bulkhead.  From the tee fitting there's 1/4" ID Tygon coming out and transitions to 1/4" OD standard static line along the longeron.  The 1/4" OD line is very snug inside the Tygon and I've also got a small hose clamp at the transition point to insure sealing.  No issues with leaks in 2 years.



Bob

RV-10 N442PM

--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

sean(at)stephensville.com
Guest

Posted: Tue Apr 20, 2010 7:05 am Post subject: Cleveland Static Ports and 1/4 ID to 1/4 OD

Very good.  Thanks Bob.  Guess  I shouldn't have knocked it until I 

tried it. 



do not archive

-Sean #40303



On 4/20/10 8:05 AM, Condrey, Bob (US SSA) wrote:

[quote] 



 I used 1/4" ID Tygon between the static ports up to a 1/4" tee fitting secured to the mid-point on the bulkhead.  From the tee fitting there's 1/4" ID Tygon coming out and transitions to 1/4" OD standard static line along the longeron.  The 1/4" OD line is very snug inside the Tygon and I've also got a small hose clamp at the transition point to insure sealing.  No issues with leaks in 2 years.



 Bob

 RV-10 N442PM

 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum