Matronics Email Lists :: View topic - 4 into 1 dsub connector

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

4 into 1 dsub connector

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

cjhukill(at)cox.net
Guest

Posted: Mon Jul 26, 2010 6:15 am Post subject: 4 into 1 dsub connector

I'm wiring my RV10 for the Dynon network and am  looking for a source for a high quality (OBAM) 9 pin Dsub connector that would  split into 4. The Dynon solution is multiple  2 into 1 harnesses, but a 4  into 1 splitter would be a more elegant solution, if such a device exists. The  ribbon mount connectors that Bob had on the list isn't appropriate for aircraft  critical systems, I believe, nor is the ribbon of sufficient gauge, but a solid  multi connector would be. All the normal searches have struck out for me, but  maybe someone knows a source?

 Chris Hukill

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Mon Jul 26, 2010 2:54 pm Post subject: 4 into 1 dsub connector

At 09:12 AM 7/26/2010, you wrote:

  	  Quote: 	
		   I'm wiring my RV10 for the Dynon network and am looking for a source for a high quality (OBAM) 9 pin Dsub connector that would split into 4. The Dynon solution is multiple  2 into 1 harnesses, but a 4 into 1 splitter would be a more elegant solution, if such a device exists. The ribbon mount connectors that Bob had on the list isn't appropriate for aircraft critical systems, I believe, nor is the ribbon of sufficient gauge, but a solid multi connector would be. All the normal searches have struck out for me, but maybe someone knows a source? 	


   Those are generally fabricated by individuals

   who have the application. Suggest you consider

   ExpressPCB layouts to mount an array of the

   necessary connectors on a single board. See:



  http://expresspcb.com/



   If you're not inclined to become a board layout

   person, I or perhaps someone else on the List

   could do the layout for you. A minimum order

   from ExpressPCB would get you 6 or more of

   the necessary boards for $59. 



 [img]cid:.0[/img]



 

   Be advised that this will only work to gang

   like-sexed connectors. When you put rows of

   connectors on "combed" traces, pin 1 will

   be connected to pin 1 of all other connectors

   only if they're the same gender.



   The ribbon cable adapter was intended for

   test purposes only. I've used a lot of mass-terminated

   ribbon cable in test setups but not for

   qualified production.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

26607d46.jpg

Description:

Filesize:

32.96 KB

Viewed:

1305 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum