 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
ronlee
Joined: 25 Dec 2006
Posts: 141
|
 Posted: Thu Aug 19, 2010 9:18 am Post subject: Jacking up the front end of a 701 |
 |
|
I need to replace the rubber bushings on my 701. How do I jack up the the plane so the gear can be worked on. There doesn't seem to be a hard place to jack under. Even a 2x6 across the bottom from side to side seems to want to bulge the sides a bit.
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
Ron Lee
Tucson, Arizona |
|
| Back to top |
|
 |
carlossa52(at)gmail.com
Guest
|
| Posted: Thu Aug 19, 2010 9:51 am Post subject: Jacking up the front end of a 701 |
|
|
How about tying down the tail?
Carlos
On 19 August 2010 13:18, ronlee <rlee468(at)comcast.net (rlee468(at)comcast.net)> wrote:
[quote]--> Zenith701801-List message posted by: "ronlee" <rlee468(at)comcast.net (rlee468(at)comcast.net)>
I need to replace the rubber bushings on my 701. How do I jack up the the plane so the gear can be worked on. There doesn't seem to be a hard place to jack under. Even a 2x6 across the bottom from side to side seems to want to bulge the sides a bit.
--------
Ron Lee
Tucson, Arizona
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
jlatimer1(at)cox.net
Guest
|
| Posted: Thu Aug 19, 2010 9:51 am Post subject: Jacking up the front end of a 701 |
|
|
Ron,
Here is an ideal on how to jack up the front end from Larry Mac's site.
After you jack it up you can rest the front end on some kind of support.
I modified this idea to change tires on my 601.
Hope this helps.
Jerry
Chandler Arizona
601 15 hours toward my 40.
On Thu, Aug 19, 2010 at 10:18 AM, ronlee wrote:
| Quote: |
I need to replace the rubber bushings on my 701. How do I jack up the
the plane so the gear can be worked on. There doesn't seem to be a
hard place to jack under. Even a 2x6 across the bottom from side to
side seems to want to bulge the sides a bit.
--------
Ron Lee
Tucson, Arizona
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=309423#309423
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
114.71 KB |
| Viewed: |
4123 Time(s) |
|
| Description: |
|
| Filesize: |
179.75 KB |
| Viewed: |
4123 Time(s) |
|
|
|
| Back to top |
|
|
craig(at)craigandjean.com
Guest
|
| Posted: Thu Aug 19, 2010 10:04 am Post subject: Jacking up the front end of a 701 |
|
|
I think he is talking about the rubber bushings between the main gear (not
the nose) and the fuselage.
FWIW I did rest my fuselage on a 2 by 6 when changing the rubber pads but my
engine and wings are not mounted.
-- Craig
--
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
dons701
Joined: 22 May 2009
Posts: 80
Location: Hershey, PA
|
| Posted: Sat Aug 21, 2010 1:37 pm Post subject: Re: Jacking up the front end of a 701 |
|
|
No problem, use a car jack to lift each side to lift the tire 3 to 4 inches. You will have to use blocks of wood on top of the jack to gain the height. Then place a 2x4 about a foot long parallel to the sides, just ahead of the main gear and clamps. Place your jack stands (tall ones), under the 2x4's for each side. Let the jack down carefully. This area has to be more than strong enough because of all the forces that are delivered all around this area. This is how I replaced my entire main gear and rubber cushions.
Don
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
Zenith 701 #76120
Jabiru 2200A #2456 95 hours
Sensenich Wood 64-PJ-36 Prop |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
