Matronics Email Lists :: View topic - stainless metric screws needed

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

stainless metric screws needed

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

jcolquit(at)law.ua.edu
Guest

Posted: Tue Sep 14, 2010 5:42 am Post subject: stainless metric screws needed

Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.   

   

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).  

   

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.  

   

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.  

   

We also need some metric nylon washers (M4, M5).   

   

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.  

   

Thanks.  

   

Joe Colquitt  

CJ6A  

      [quote][b]

dsavarese0812(at)bellsout
Guest

Posted: Tue Sep 14, 2010 6:41 am Post subject: stainless metric screws needed

Contact Maryland Metrics.  http://mdmetric.com/indexg.html?gclid=CO33qa2Rh6QCFcpS2godIUeVJA.   Don't try to order on-line.  It is way too confusing.  Just call them  and tell them what you want.  Don't forget the nylon washers to go with the  screws.

 Dennis

 [quote]   ---

viperdoc(at)mindspring.co
Guest

Posted: Tue Sep 14, 2010 6:56 am Post subject: stainless metric screws needed

Joe, will get back to U with a source that is cheaper than MM. In OR now away from my desk.

Doc



Sent from my iPhone



On Sep 14, 2010, at 8:37 AM, "Joseph Colquitt" <jcolquit(at)law.ua.edu (jcolquit(at)law.ua.edu)> wrote:



[quote]    

Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.   

   

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).  

   

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.  

   

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.  

   

We also need some metric nylon washers (M4, M5).   

   

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.  

   

Thanks.  

   

Joe Colquitt  

CJ6A  

       	  Quote: 	
		  



href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	


[b]

george(at)gesoco.com
Guest

Posted: Tue Sep 14, 2010 7:26 am Post subject: stainless metric screws needed

Metric Screw and tool has YAK Kits. www.metricscrew-toolco.com/  

     

George Coy  

CAS Ltd.  

714 Airport Rd.  

Swanton VT 05488  

802-868-5633 off  

802-363-5782 cell  

george.coy(at)gmail.com (george.coy(at)gmail.com)  

http://coyafct.com/  

  

SKYPE george.coy      

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of A. Dennis Savarese

 Sent: Tuesday, September 14, 2010 10:34 AM

 To: yak-list(at)matronics.com

 Subject: Re: stainless metric screws needed  

  

  

     

Contact Maryland Metrics.  http://mdmetric.com/indexg.html?gclid=CO33qa2Rh6QCFcpS2godIUeVJA.  Don't try to order on-line.  It is way too confusing.  Just call them and tell them what you want.  Don't forget the nylon washers to go with the screws.  

    

Dennis  

   	  Quote: 	
		      

----- Original Message -----   

    

From: Joseph Colquitt (jcolquit(at)law.ua.edu)   

    

To: yak-list(at)matronics.com (yak-list(at)matronics.com)   

    

Sent: Tuesday, September 14, 2010 8:37 AM  

    

Subject: stainless metric screws needed  

    

   

  

Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.   

   

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).  

   

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.  

   

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.  

   

We also need some metric nylon washers (M4, M5).   

   

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.  

   

Thanks.  

   

Joe Colquitt  

CJ6A   	  Quote: 	
		    href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-Listhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c 	
   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List 	
0 	  Quote: 	
		  href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List 	
1 	  Quote: 	
		  href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List 	
2 	  Quote: 	
		  href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List 	
3 	  Quote: 	
		  href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List 	
4

       [quote][b]

mark.bitterlich(at)navy.m
Guest

Posted: Tue Sep 14, 2010 7:57 am Post subject: stainless metric screws needed

And they are VERY VERY GOOD! (However, they do not come with the nylon

washers as was previously noted). 



Mark Bitterlich

 



--

wlannon(at)persona.ca
Guest

Posted: Tue Sep 14, 2010 8:38 am Post subject: stainless metric screws needed

Joe;

  

 Nylon washers - #8 and #10 standard from any  aircraft supply source will work just fine for the M4 and M5 screw.

  

 walt

 [quote]   ---

wlannon(at)persona.ca
Guest

Posted: Tue Sep 14, 2010 8:39 am Post subject: stainless metric screws needed

Joe;

  

 Doug Sapp stocks them

  

 Walt

  

  

 ---

dougsappllc(at)gmail.com
Guest

Posted: Tue Sep 14, 2010 8:40 am Post subject: stainless metric screws needed

Hey guys I stock both 4mm and 5mm low profile Phillips head screws.

Buy them 1 or a hundred at a time not matter!!  I also have complete

sets for CJ's.  Contact me off list please.



Doug



On 9/14/10, Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E

<mark.bitterlich(at)navy.mil> wrote:

[quote] 

 MALS-14 64E" <mark.bitterlich(at)navy.mil>



 And they are VERY VERY GOOD! (However, they do not come with the nylon

 washers as was previously noted).



 Mark Bitterlich

 --

rijaeger(at)wausau.k12.wi
Guest

Posted: Wed Sep 15, 2010 4:45 am Post subject: stainless metric screws needed

Just FYI...There's a company in Wisconsin (not sure if they're national) called FASTENAL that has been able to retrieve ANY screw, bolt, nut, washer, etc. that I've ever requested. I've bought a bunch of stainless stuff from them. We have a local outlet here in Wausau. And they don't charge aircraft supply house prices.

  

 



 	  Quote: 	
		  >> Walter Lannon <wlannon(at)persona.ca> 9/14/2010 11:26 AM >>>


	


 Joe;

  

 Nylon washers - #8 and #10 standard from any aircraft supply source will work just fine for the M4 and M5 screw.

  

 walt

 [quote] ---

yakjock(at)gmail.com
Guest

Posted: Wed Sep 15, 2010 8:44 am Post subject: stainless metric screws needed

Hi Joe,



Contact Doug Sapp for the screws and washers.  All of the stainless screws on my plane Hana Hou! are from Doug (and all were polished individually by me!).



(And no, I will not start a pun fest on this.)



Cheers,



Hal

jcolquit(at)law.ua.edu
Guest

Posted: Wed Sep 15, 2010 12:48 pm Post subject: stainless metric screws needed

Thanks everyone for the excellent information regarding sources for metric stainless screws. I appreciate the response.  

   

Joe  

CJ6A N420RB  

   

Joseph A. Colquitt  

Beasley Professor of Law  

The University of Alabama

 School of Law

 and Circuit Judge – Retired (Alabama)  

   

This email is intended only for the person to whom it 

 is addressed. Any review or other use of this information 

 by persons or entities other than the intended recipient 

 or any retransmission without the consent of the sender is 

 prohibited. The views or opinions expressed by the sender 

 of this email are not necessarily those of the institution.  

   

      [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum