Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

stainless metric screws needed

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
jcolquit(at)law.ua.edu
Guest





PostPosted: Tue Sep 14, 2010 5:42 am    Post subject: stainless metric screws needed Reply with quote

Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.

We also need some metric nylon washers (M4, M5).

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.

Thanks.

Joe Colquitt
CJ6A
[quote][b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dsavarese0812(at)bellsout
Guest





PostPosted: Tue Sep 14, 2010 6:41 am    Post subject: stainless metric screws needed Reply with quote

Contact Maryland Metrics. http://mdmetric.com/indexg.html?gclid=CO33qa2Rh6QCFcpS2godIUeVJA. Don't try to order on-line. It is way too confusing. Just call them and tell them what you want. Don't forget the nylon washers to go with the screws.
Dennis
[quote] ---


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
viperdoc(at)mindspring.co
Guest





PostPosted: Tue Sep 14, 2010 6:56 am    Post subject: stainless metric screws needed Reply with quote

Joe, will get back to U with a source that is cheaper than MM. In OR now away from my desk.
Doc

Sent from my iPhone

On Sep 14, 2010, at 8:37 AM, "Joseph Colquitt" <jcolquit(at)law.ua.edu (jcolquit(at)law.ua.edu)> wrote:

[quote]
Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.

We also need some metric nylon washers (M4, M5).

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.

Thanks.

Joe Colquitt
CJ6A
Quote:


href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/contribution


[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
george(at)gesoco.com
Guest





PostPosted: Tue Sep 14, 2010 7:26 am    Post subject: stainless metric screws needed Reply with quote

Metric Screw and tool has YAK Kits. www.metricscrew-toolco.com/

George Coy
CAS Ltd.
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
george.coy(at)gmail.com (george.coy(at)gmail.com)
http://coyafct.com/

SKYPE george.coy
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of A. Dennis Savarese
Sent: Tuesday, September 14, 2010 10:34 AM
To: yak-list(at)matronics.com
Subject: Re: stainless metric screws needed



Contact Maryland Metrics. http://mdmetric.com/indexg.html?gclid=CO33qa2Rh6QCFcpS2godIUeVJA. Don't try to order on-line. It is way too confusing. Just call them and tell them what you want. Don't forget the nylon washers to go with the screws.

Dennis
Quote:

----- Original Message -----

From: Joseph Colquitt (jcolquit(at)law.ua.edu)

To: yak-list(at)matronics.com (yak-list(at)matronics.com)

Sent: Tuesday, September 14, 2010 8:37 AM

Subject: stainless metric screws needed



Hi all. Does anyone have a U.S. source for truss / Phillips head stainless metric screws? I need a fair number of M4 and a few M5 screws. I’ve spoken with the people at Maryland Metrics after spending quite some time in finding the screws (under “B1111 appendix”) on their website.

They list but do not stock these screws, but would be glad to sell me bulk quantities. The guy and I calculated an order based on their minimums, and it would have cost $480 just for the M4s. Forget the M5s – together the order would have exceeded $1000. (plus shipping, and the order would have come from Japan).

Other potential sources try to shift me to pan head, combo, slotted, or some other version of the metric stainless screw. Truss heads are not the most available version of metric stainless screws.

I need, at most, a few hundred, not thousands. I was thinking that I could order 500-600 M4s and maybe 200 M5s since another CJ guy says he will split the order with me, but neither he nor I want to spend $500 (each) to get some screws.

We also need some metric nylon washers (M4, M5).

Does anyone know of any good U.S. sources for such items? Any response will be appreciated, and off-list is fine.

Thanks.

Joe Colquitt
CJ6A
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-Listhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
0
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
1
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
2
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
3
Quote:
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
4
[quote][b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
mark.bitterlich(at)navy.m
Guest





PostPosted: Tue Sep 14, 2010 7:57 am    Post subject: stainless metric screws needed Reply with quote

And they are VERY VERY GOOD! (However, they do not come with the nylon
washers as was previously noted).

Mark Bitterlich


--


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
wlannon(at)persona.ca
Guest





PostPosted: Tue Sep 14, 2010 8:38 am    Post subject: stainless metric screws needed Reply with quote

Joe;

Nylon washers - #8 and #10 standard from any aircraft supply source will work just fine for the M4 and M5 screw.

walt
[quote] ---


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
wlannon(at)persona.ca
Guest





PostPosted: Tue Sep 14, 2010 8:39 am    Post subject: stainless metric screws needed Reply with quote

Joe;

Doug Sapp stocks them

Walt


---


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dougsappllc(at)gmail.com
Guest





PostPosted: Tue Sep 14, 2010 8:40 am    Post subject: stainless metric screws needed Reply with quote

Hey guys I stock both 4mm and 5mm low profile Phillips head screws.
Buy them 1 or a hundred at a time not matter!! I also have complete
sets for CJ's. Contact me off list please.

Doug

On 9/14/10, Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E
<mark.bitterlich(at)navy.mil> wrote:
[quote]
MALS-14 64E" <mark.bitterlich(at)navy.mil>

And they are VERY VERY GOOD! (However, they do not come with the nylon
washers as was previously noted).

Mark Bitterlich
--


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
rijaeger(at)wausau.k12.wi
Guest





PostPosted: Wed Sep 15, 2010 4:45 am    Post subject: stainless metric screws needed Reply with quote

Just FYI...There's a company in Wisconsin (not sure if they're national) called FASTENAL that has been able to retrieve ANY screw, bolt, nut, washer, etc. that I've ever requested. I've bought a bunch of stainless stuff from them. We have a local outlet here in Wausau. And they don't charge aircraft supply house prices.



Quote:
>> Walter Lannon <wlannon(at)persona.ca> 9/14/2010 11:26 AM >>>

Joe;

Nylon washers - #8 and #10 standard from any aircraft supply source will work just fine for the M4 and M5 screw.

walt
[quote] ---


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
yakjock(at)gmail.com
Guest





PostPosted: Wed Sep 15, 2010 8:44 am    Post subject: stainless metric screws needed Reply with quote

Hi Joe,

Contact Doug Sapp for the screws and washers. All of the stainless screws on my plane Hana Hou! are from Doug (and all were polished individually by me!).

(And no, I will not start a pun fest on this.)

Cheers,

Hal


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
jcolquit(at)law.ua.edu
Guest





PostPosted: Wed Sep 15, 2010 12:48 pm    Post subject: stainless metric screws needed Reply with quote

Thanks everyone for the excellent information regarding sources for metric stainless screws. I appreciate the response.

Joe
CJ6A N420RB

Joseph A. Colquitt
Beasley Professor of Law
The University of Alabama
School of Law
and Circuit Judge – Retired (Alabama)

This email is intended only for the person to whom it
is addressed. Any review or other use of this information
by persons or entities other than the intended recipient
or any retransmission without the consent of the sender is
prohibited. The views or opinions expressed by the sender
of this email are not necessarily those of the institution.

[quote][b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group