 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
capt_riney(at)yahoo.com
Guest
|
 Posted: Sat Oct 09, 2010 9:09 am Post subject: 582 High Coolant Temp |
 |
|
Kolbers - I'm trying to complete the engine break-in on my new 582, and struggling with high coolant temp. I burped the system several time to remove the air and checked that the radiator is full (using Prestone pre-diluted dexcool). I've got the dual radiator system. The coolant temp slowly climbs during running and I can't get above about 5500 rpm without the coolant temp kissing 180F at which point I pull to idle and shutdown. The outside air temp was about 75F. I've checked the coolant temp probe and I believe it is measuring temp correctly. I'm concerned about lack of airflow through the radiator when trying to do a 1 hr engine ground run. Not sure what to do at this point except wait for a colder day.
Anyone else had this problem? Any suggestions?
Mark Rinehart
Indy Kolb Mk3 Classic
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
zharvey(at)bentoncountyca
Guest
|
| Posted: Sat Oct 09, 2010 9:23 am Post subject: 582 High Coolant Temp |
|
|
Mark, when I was doing the ground break-in on my 618, I was told to use a
garden hose and spray water onto the radiator. Worked for me.
Gene
--------------------------------------------------
From: "mark rinehart" <capt_riney(at)yahoo.com>
Sent: Saturday, October 09, 2010 12:07 PM
To: <kolb-list(at)matronics.com>
Subject: 582 High Coolant Temp
| Quote: |
Kolbers - I'm trying to complete the engine break-in on my new 582, and
struggling with high coolant temp. I burped the system several time to
remove the air and checked that the radiator is full (using Prestone
pre-diluted dexcool). I've got the dual radiator system. The coolant temp
slowly climbs during running and I can't get above about 5500 rpm without
the coolant temp kissing 180F at which point I pull to idle and shutdown.
The outside air temp was about 75F. I've checked the coolant temp probe
and I believe it is measuring temp correctly. I'm concerned about lack of
airflow through the radiator when trying to do a 1 hr engine ground run.
Not sure what to do at this point except wait for a colder day.
Anyone else had this problem? Any suggestions?
Mark Rinehart
Indy Kolb Mk3 Classic
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Richard Pike
Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee
|
| Posted: Sat Oct 09, 2010 11:51 am Post subject: Re: 582 High Coolant Temp |
|
|
Back in 2003, Steven Green had a 582 on his MKIII, and was having trouble keeping the temps down with that radiator setup. Don't remember the details, but I did save the pictures he posted. The goal was to keep hot air from the exhaust manifold from going through the radiator, plus duct air around the carbs better, and he reported good results.
The pictures will have to be self explanatory, as I don't remember the details, sorry.
Richard Pike
MKIII N420P (420ldPoops)
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
36.58 KB |
| Viewed: |
2039 Time(s) |
|
| Description: |
|
| Filesize: |
47.02 KB |
| Viewed: |
2039 Time(s) |
|
| Description: |
|
| Filesize: |
41.76 KB |
| Viewed: |
2039 Time(s) |
|
|
|
| Back to top |
|
|
tclongo(at)att.net
Guest
|
| Posted: Sat Oct 09, 2010 4:48 pm Post subject: 582 High Coolant Temp |
|
|
On 10/9/2010 1:07 PM, mark rinehart wrote:
| Quote: |
Kolbers - I'm trying to complete the engine break-in on my new 582, and struggling with high coolant temp. I burped the system several time to remove the air and checked that the radiator is full (using Prestone pre-diluted dexcool). I've got the dual radiator system. The coolant temp slowly climbs during running and I can't get above about 5500 rpm without the coolant temp kissing 180F at which point I pull to idle and shutdown. The outside air temp was about 75F. I've checked the coolant temp probe and I believe it is measuring temp correctly. I'm concerned about lack of airflow through the radiator when trying to do a 1 hr engine ground run. Not sure what to do at this point except wait for a colder day.
Anyone else had this problem? Any suggestions?
Mark Rinehart
Indy Kolb Mk3 Classic
I sprayed water on the radiator to keep it cool.
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
