Matronics Email Lists :: View topic - Ray Allen Pushbutton Wiring Question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Ray Allen Pushbutton Wiring Question

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

marty.santic(at)gmail.com
Guest

Posted: Wed Oct 27, 2010 7:18 am Post subject: Ray Allen Pushbutton Wiring Question

The wire supplied with the Ray Allen microphone PTT grip is very small.  I would say it is #28 or #30.  What is a good butt-splice to use for this application.

-- 

Marty Santic



  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

MNellis

Joined: 16 Aug 2008
Posts: 15
Location: Georgetown, TSX

Posted: Wed Oct 27, 2010 9:24 am Post subject: Ray Allen Pushbutton Wiring Question

For wire that small a butt splice would not be apprpriate.  Instead,     soldering the wires together covered by heat shrink might be a     better alternative.

     

     Mike

     [quote]The wire supplied with the Ray Allen microphone PTT       grip is very small.  I would say it is #28 or #30.  What is a good       butt-splice to use for this application.       

       -- 

       Marty Santic

       

        	  Quote: 	
		  

	
     [b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Mike Nellis
RV6 Fuselage

sprocket(at)vx-aviation.c
Guest

Posted: Wed Oct 27, 2010 9:52 am Post subject: Ray Allen Pushbutton Wiring Question

Alternatively, use male and female crimp pins for a  D-Sub connector and heat shrink them together.  



   From: Mike Nellis (mike(at)bmnellis.com) 

 Sent: Wednesday, October 27, 2010 10:18 AM

 To: aeroelectric-list(at)matronics.com (aeroelectric-list(at)matronics.com)  

 Subject: Re: Ray Allen Pushbutton Wiring  Question

 



For wire that small a butt splice would not be apprpriate.   Instead, soldering the wires together covered by heat shrink might be a better  alternative.



Mike

  	  Quote: 	
		  The wire supplied with the Ray Allen microphone PTT grip is very    small.  I would say it is #28 or #30.  What is a good butt-splice to    use for this application.

-- 

Marty Santic



 	  Quote: 	
		  

	




href="http://www.matronics.com/Navigator?AeroElectric-List">http://www.matronics.com/Navigator?AeroElectric-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

	
 

   Release Date:  10/27/10 06:34:00

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

rparigoris

Joined: 24 Nov 2009
Posts: 791

Posted: Wed Oct 27, 2010 10:16 am Post subject: Re: Ray Allen Pushbutton Wiring Question

You could also use solder type D-sub connectors with heat shrink.

I used the High Density 3 row D-sub connectors from Radio Shack modified to fit inside my stick. 

See last 3 pics:

http://www.europaowners.org/forums/gallery2.php?g2_itemId=31671



Ron Parigoris

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

simon(at)synchdes.com
Guest

Posted: Wed Oct 27, 2010 11:15 am Post subject: Ray Allen Pushbutton Wiring Question

These PICABOND butt splices are made by Tyco for the telephone cable 

industry.  I have the part drawing PDF if anyone needs it.



Digi-Key pn 61899-1-ND, Tyco connector butt splice, 24-28 AWG, orange, 

61899-1, $.21 each



http://parts.digikey.com/1/parts/1914216-conn-splice-butt-24-28awg-orange-61899-1.html



Simon Ramirez

LEZ N-44LZ

Oviedo, FL  USA

On 10/27/2010 1:49 PM, Vern Little wrote:

Alternatively, use male and female crimp pins for a D-Sub connector and 

heat shrink them together.

*From:* Mike Nellis <mailto:mike(at)bmnellis.com>

*Sent:* Wednesday, October 27, 2010 10:18 AM

*To:* aeroelectric-list(at)matronics.com 

<mailto:aeroelectric-list(at)matronics.com>

*Subject:* Re: Ray Allen Pushbutton Wiring Question



For wire that small a butt splice would not be apprpriate.  Instead, 

soldering the wires together covered by heat shrink might be a better 

alternative.



Mike

 	  Quote: 	
		   The wire supplied with the Ray Allen microphone PTT grip is very 

 small.  I would say it is #28 or #30.  What is a good butt-splice to 

 use for this application.



 -- 

 Marty Santic

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

mrspudandcompany(at)veriz
Guest

Posted: Wed Oct 27, 2010 11:44 am Post subject: Ray Allen Pushbutton Wiring Question

These PICABOND butt splices are made by Tyco for the telephone cable 

industry.  I have the part drawing PDF if anyone needs it.



Digi-Key pn 61899-1-ND, Tyco connector butt splice, 24-28 AWG, orange, 

61899-1, $.21 each



http://parts.digikey.com/1/parts/1914216-conn-splice-butt-24-28awg-orange-61

899-1.html



Simon Ramirez

		Simon,



		Do these splices require a special crimping tool?  At what

price?



		Roger

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

winmail.dat

Description:

Download

Filename:

winmail.dat

Filesize:

3.43 KB

Downloaded:

477 Time(s)

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Oct 27, 2010 12:57 pm Post subject: Ray Allen Pushbutton Wiring Question

At 10:13 AM 10/27/2010, you wrote:

 	  Quote: 	
		  The wire supplied with the Ray Allen microphone PTT grip is very 

small.  I would say it is #28 or #30.  What is a good butt-splice to 

use for this application.


	


   Solder and heat-shrink. See:



   http://aeroelectric.com/articles/Solder_Lap_Splicing/Solder_Lap_Splices.html

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum