 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Okanogan Lew
Joined: 22 Jul 2010
Posts: 45
|
 Posted: Mon Jan 10, 2011 4:19 pm Post subject: Housai cylinder bore diameter CJ6A |
 |
|
does anyone know the standard cyl. bore diameter in inches? Thanks.
Paul
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
radiopicture
Joined: 23 Jun 2008
Posts: 263
|
| Posted: Mon Jan 10, 2011 4:45 pm Post subject: Housai cylinder bore diameter CJ6A |
|
|
4
On Jan 10, 2011, at 7:19 PM, Okanogan Lew wrote:
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
wlannon(at)persona.ca
Guest
|
| Posted: Mon Jan 10, 2011 6:48 pm Post subject: Housai cylinder bore diameter CJ6A |
|
|
Paul;
Huosai cyl. dia. is 105 mm or 4.13385" (4.134")
Walt
---
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
okanoganlew(at)gmail.com
Guest
|
| Posted: Mon Jan 10, 2011 7:34 pm Post subject: Housai cylinder bore diameter CJ6A |
|
|
Thanks Walt. Is a cyl. 5-6 thousands over still servicable? If not, does anyone make oversize rings?
Paul
On Mon, Jan 10, 2011 at 6:45 PM, Walter Lannon <wlannon(at)persona.ca (wlannon(at)persona.ca)> wrote:
[quote]--> Yak-List message posted by: Walter Lannon <wlannon(at)persona.ca (wlannon(at)persona.ca)>
Paul;
Huosai cyl. dia. is 105 mm or 4.13385" (4.134")
Walt
---
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
wlannon(at)persona.ca
Guest
|
| Posted: Mon Jan 10, 2011 9:41 pm Post subject: Housai cylinder bore diameter CJ6A |
|
|
Paul;
I think that may be acceptable if some choke still remains and you fit new standard rings though you could expect an increase in oil consumption.
Check with Doug for rings - maybe an oversize is available??
I believe the M14 has the same bore so that manual may be helpful in determining repair tolerances.
Walt
[quote] ---
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
GeorgeCoy
Joined: 02 Dec 2010
Posts: 310
|
| Posted: Tue Jan 11, 2011 5:40 am Post subject: Housai cylinder bore diameter CJ6A |
|
|
Paul, I cannot answer for the Housai engine, but the M14 dimensions’ are as follows:
Standard size cylinder is a straight bore Min 104.970 mm (4.132 in) and Max is 105.030 mm (4.135 in)
First oversize is a straight bore of Min 105.12 mm (4.138 in) and Max of 105.18 mm (4.131 in ).
In both cases the max “Ovality” is .040 mm (.0016 in )
You will note that very little ware is permitted and the oversize rings are only .006 oversize.
We offer both standard and oversize pistons with the modern rings.
George Coy
Motorstar NA
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
george.coy(at)gmail.com (george.coy(at)gmail.com)
SKYPE george.coy
motorstarna.com
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
george(at)gesoco.com
Guest
|
| Posted: Tue Jan 11, 2011 10:43 am Post subject: Housai cylinder bore diameter CJ6A |
|
|
Paul, I cannot answer for the Housai engine, but the M14 dimensions’ are as follows:
Standard size cylinder is a straight bore Min 104.970 mm (4.132 in) and Max is 105.030 mm (4.135 in)
First oversize is a straight bore of Min 105.12 mm (4.138 in) and Max of 105.18 mm (4.131 in ).
In both cases the max “Ovality” is .040 mm (.0016 in )
You will note that very little ware is permitted and the oversize rings are only .006 oversize.
We offer both standard and oversize pistons with the modern rings.
George Coy
Motorstar NA
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
george.coy(at)gmail.com (george.coy(at)gmail.com)
SKYPE george.coy
motorstarna.com
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
