Matronics Email Lists :: View topic - Kolb list: Pitot probe

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Kolb list: Pitot probe

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

mdnanwelch7(at)hotmail.co
Guest

Posted: Sat Feb 05, 2011 6:39 am Post subject: Kolb list: Pitot probe

Pat, 

 

  Cutting off the probe is not possible.  I have a Dynon EFIS probe, with the

built-in AOA sensor port.  It is exactly like this one;



  http://www.dynonavionics.com/images/AOA_new_unheated.jpg

  

   I added my own extension, to get it down low enough to not

 be affected by diverted air from the nosecone.  (see photo)

 

  Besides, I've already relocated it.  

 

  Now, I'm on to my next fiasco!!!  My brake caliper leaked yesterday when I

tried to bleed the brake system on the left one.  The 1/8" NPT ports cracked

as I tried to tighten the fittings.    Crap!!  Plus, the discs brakes have NO identifying 

marks, writing, numbers, anything.  I suspect my disc brakes are from a company

no longer in business.  I got the complete kit; discs, rotors, axles, bearings, wheels, etc)

 I got them in trade a few years ago.  Nice parts, and all, but

there is no way of knowing who the company is that made them!!

 

  Doesn't look like it should be too hard to duplicate the "puck holder" as they call it.

 

  I've got master machinist Rick G giving me pointers.

 

 

 	  Quote: 	
		  cut the probe off 


	


 >Pat

 	  Quote:

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

airspeed_pitot_mount_003.jpg

Description:

Filesize:

103.04 KB

Viewed:

1204 Time(s)

pj.ladd(at)btinternet.com
Guest

Posted: Sat Feb 05, 2011 7:49 am Post subject: Kolb list: Pitot probe

Hi Mike,

 << I added my own extension>>

  

 Nice neat job.

  

 Pat

   [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

slyck(at)frontiernet.net
Guest

Posted: Sat Feb 05, 2011 10:26 am Post subject: Kolb list: Pitot probe

A word of caution to those who may encounter it: (Mike, not necessarily you).  ---never use teflon tape on atapered, pipe type fitting going into a casting.  I learned that painful lesson many years ago.

Stick with old fashioned permatex or a similar product.

BB



On 5, Feb 2011, at 9:36 AM, Mike Welch wrote:

[quote]Pat, 

 

  Cutting off the probe is not possible.  I have a Dynon EFIS probe, with the

built-in AOA sensor port.  It is exactly like this one;



 http://www.dynonavionics.com/images/AOA_new_unheated.jpg

 

  I added my own extension, to get it down low enough to not

be affected by diverted air from the nosecone.  (see photo)



  Besides, I've already relocated it.  

 

  Now, I'm on to my next fiasco!!!  My brake caliper leaked yesterday when I

tried to bleed the brake system on the left one.  The 1/8" NPT ports cracked

as I tried to tighten the fittings.    Crap!!  Plus, the discs brakes have NO identifying 

marks, writing, numbers, anything.  I suspect my disc brakes are from a company

no longer in business.  I got the complete kit; discs, rotors, axles, bearings, wheels, etc)

I got them in trade a few years ago.  Nice parts, and all, but

there is no way of knowing who the company is that made them!!

 

  Doesn't look like it should be too hard to duplicate the "puck holder" as they call it.

 

  I've got master machinist Rick G giving me pointers.

 

 

 	  Quote: 	
		  cut the probe off 


	


 	  Quote: 	
		  Pat

 	  Quote: 	
		   	
<airspeed pitot mount 003.jpg>
	


[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum