 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
cristalclear13
Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia
|
 Posted: Mon Feb 14, 2011 1:20 pm Post subject: Plastic gas tank grommets, etc |
 |
|
While putting in my new battery I had to take out my gas tanks since my battery is at the back of the cage. I cleaned out the plastic gas tanks but then noticed that the metal fuel thing-a-ma-jig where the gas comes out is really rusted.
I see that jbm industries sells the grommet but who sells the metal thing-a-ma-jig that the grommet goes around?
Next question...how to get it out and back in? There is no way I can reach through the opening of the gas tank to work on it (too small and too far of a reach)...does it just pull out with force through the hole and then force it back in with the new grommet and metal thing-a-ma-jig (yes you can correct me to what it is actually called).
Thanks!
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
335.46 KB |
| Viewed: |
3505 Time(s) |
|
| Description: |
|
| Filesize: |
134.7 KB |
| Viewed: |
3505 Time(s) |
|
| Description: |
|
| Filesize: |
30.56 KB |
| Viewed: |
3505 Time(s) |
|
_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009 |
|
| Back to top |
|
 |
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Mon Feb 14, 2011 1:50 pm Post subject: Plastic gas tank grommets, etc |
|
|
Cristal, This is probably what you have.http://www.aircraftspruce.com/catalog/appages/ffelbow.php
[/url]A PITA to remove, especially with the tank in place, more so if the grommet has age hardened. Basically it's an Armstrong removal. Support the area around the grommet as you pull the barbed fitting out so you don't damage the tank. Twisting as you pull helps. Coat the new fitting with some lithium grease when installing.
Rick Girard
On Mon, Feb 14, 2011 at 3:20 PM, cristalclear13 <cristalclearwaters(at)gmail.com (cristalclearwaters(at)gmail.com)> wrote:
| Quote: | --> Kolb-List message posted by: "cristalclear13" <cristalclearwaters(at)gmail.com (cristalclearwaters(at)gmail.com)>
While putting in my new battery I had to take out my gas tanks since my battery is at the back of the cage. I cleaned out the plastic gas tanks but then noticed that the metal fuel thing-a-ma-jig where the gas comes out is really rusted.
I see that jbm industries sells the grommet but who sells the metal thing-a-ma-jig that the grommet goes around?
Next question...how to get it out and back in? There is no way I can reach through the opening of the gas tank to work on it (too small and too far of a reach)...does it just pull out with force through the hole and then force it back in with the new grommet and metal thing-a-ma-jig (yes you can correct me to what it is actually called).
Thanks!
--------
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009
Read this topic online here:
[url=http://forums.matronics.com/viewtopic.php?p=331061#331061]http://forums.matronics.com/viewtopic.php?p=331061#331061
Attachments:
http://forums.matronics.com//files/plastic_gas_tank_grommet_3_211.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_2_130.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_1_207.jpg
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
sspence801(at)sbcglobal.n
Guest
|
| Posted: Mon Feb 14, 2011 1:51 pm Post subject: Plastic gas tank grommets, etc |
|
|
Just pull it out, when you get it out you will be able to clearly see how the elbow presses the grommet out to seal the fitting.
Steve Spence
Mk3X-tra
Auburn Hills, MI
From: cristalclear13 <cristalclearwaters(at)gmail.com>
To: kolb-list(at)matronics.com
Sent: Mon, February 14, 2011 4:20:37 PM
Subject: Plastic gas tank grommets, etc
--> Kolb-List message posted by: "cristalclear13" <cristalclearwaters(at)gmail.com (cristalclearwaters(at)gmail.com)>
While putting in my new battery I had to take out my gas tanks since my battery is at the back of the cage. I cleaned out the plastic gas tanks but then noticed that the metal fuel thing-a-ma-jig where the gas comes out is really rusted.
I see that jbm industries sells the grommet but who sells the metal thing-a-ma-jig that the grommet goes around?
Next question...how to get it out and back in? There is no way I can reach through the opening of the gas tank to work on it (too small and too far of a reach)...does it just pull out with force through the hole and then force it back in with the new grommet and metal thing-a-ma-jig (yes you can correct me to what it is actually called).
Thanks!
--------
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=331061#331061
Attachments:
http://forums.matronics.com//files/plastic_gas_tank_grommet_3_211.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_2_130.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_1_207.jpg
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
cristalclear13
Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia
|
|
| Back to top |
|
|
neilsenrm(at)gmail.com
Guest
|
| Posted: Mon Feb 14, 2011 2:26 pm Post subject: Plastic gas tank grommets, etc |
|
|
Cristal
That thing-a-jig is called a in tank elbow in the Lockwood catalog. Grab the elbow with a pair of pliers and twist it while pulling and it will come out. I recommend you get replacements that have the finger strainer and a shut off valve. Be sure to lube the elbow before installing the new elbow in the bushing
Also my ELT remote doesn't have a battery that I know of. I think it is powered by the main unit that my remote is wired to.
Rick Neilsen
Redrive VW Powered MKIIIC
On Mon, Feb 14, 2011 at 4:20 PM, cristalclear13 <cristalclearwaters(at)gmail.com (cristalclearwaters(at)gmail.com)> wrote:
[quote]--> Kolb-List message posted by: "cristalclear13" <cristalclearwaters(at)gmail.com (cristalclearwaters(at)gmail.com)>
While putting in my new battery I had to take out my gas tanks since my battery is at the back of the cage. I cleaned out the plastic gas tanks but then noticed that the metal fuel thing-a-ma-jig where the gas comes out is really rusted.
I see that jbm industries sells the grommet but who sells the metal thing-a-ma-jig that the grommet goes around?
Next question...how to get it out and back in? There is no way I can reach through the opening of the gas tank to work on it (too small and too far of a reach)...does it just pull out with force through the hole and then force it back in with the new grommet and metal thing-a-ma-jig (yes you can correct me to what it is actually called).
Thanks!
--------
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=331061#331061
Attachments:
http://forums.matronics.com//files/plastic_gas_tank_grommet_3_211.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_2_130.jpg
http://forums.matronics.com//files/plastic_gas_tank_grommet_1_207.jpg
ption,
www.matronics.com/Navigator?Kolb-List" target="_blank">http://www.matronics.com/Navigator?Kolb-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
