Matronics Email Lists :: View topic - cnc cutting for inst panel

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

cnc cutting for inst panel

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

keithmckinley

Joined: 11 Aug 2008
Posts: 434

Posted: Thu Feb 17, 2011 8:30 pm Post subject: cnc cutting for inst panel

Can anyone recommend a shop that is familiar with our instruments (CJ-6) and would likely have a stock CAD file they could manpulate. I have a blank panel from Doug that I'd like cut.



I know I can cut the holes myself but the CNC machine does a MUCH nicer job!



Keith

CJ6XXK

Joined: 27 Jan 2011
Posts: 21
Location: Australia

Posted: Thu Feb 17, 2011 11:37 pm Post subject: Re: cnc cutting for inst panel

Hi



I can cnc cut what ever you would like.Has someone got a CAD file of the dash?



Daniel

cjpilot710(at)aol.com
Guest

Posted: Fri Feb 18, 2011 5:26 am Post subject: cnc cutting for inst panel

I did this a number of years ago.  I had drawn up a panel in AutoCad,  and a local shop (now out of business) cut the panels that Doug sells.  The  programing of the cnc took about 4 hours, the actual cutting took :30  minutes.  Really fascinating to watch!  The fit and  finish is perfect.

  

 However I had believe I have that file around anymore.  Although I  still do a lot of cad drawing its for fun.

  

 Jim "Pappy" Goolsby

  

  In a message dated 2/17/2011 11:32:49 P.M. Eastern Standard Time,  keith.mckinley(at)townisp.com writes:

  	  Quote: 	
		  -->    Yak-List message posted by: "keithmckinley"    <keith.mckinley(at)townisp.com>



Can anyone recommend a shop that is    familiar with our instruments (CJ-6) and would likely have a stock CAD file    they could manpulate. I have a blank panel from Doug that I'd like    cut.



I know I can cut the holes myself but the CNC machine does a MUCH    nicer job!



Keith



--------

Keith    McKinley

700HS

KFIT





Read this topic online    here:



http://forums.matronics.com/viewtopic.php?p=331393#331393===============================================

_-=   e  ties  Day  ================================================               - MATRONICS WEB FORUMS  ================================================             - List Contribution Web Site  sp;                             ===================================================



	


  [quote][b]

Cliff.Coy

Joined: 03 Mar 2007
Posts: 46

Posted: Fri Feb 18, 2011 8:42 am Post subject: cnc cutting for inst panel

Haven't done a CJ panel, but we design and waterjet panels 4-5 times a year.



Contact me off list for examples.



Cheers!

Cliff

 

On Fri, Feb 18, 2011 at 08:15,  <cjpilot710(at)aol.com (cjpilot710(at)aol.com)> wrote:

 	  Quote: 	
		        I did this a number of years ago.  I had drawn up a panel in AutoCad,  and a local shop (now out of business) cut the panels that Doug sells.  The  programing of the cnc took about 4 hours, the actual cutting took :30  minutes.  Really fascinating to watch!  The fit and  finish is perfect.

  

 However I had believe I have that file around anymore.  Although I  still do a lot of cad drawing its for fun.

  

 Jim "Pappy" Goolsby

  

  In a message dated 2/17/2011 11:32:49 P.M. Eastern Standard Time,  keith.mckinley(at)townisp.com (keith.mckinley(at)townisp.com) writes:

 

 	  Quote: 	
		  -->    Yak-List message posted by: "keithmckinley"    <keith.mckinley(at)townisp.com (keith.mckinley(at)townisp.com)>



Can anyone recommend a shop that is    familiar with our instruments (CJ-6) and would likely have a stock CAD file    they could manpulate. I have a blank panel from Doug that I'd like    cut.



I know I can cut the holes myself but the CNC machine does a MUCH    nicer job!



Keith



--------

Keith    McKinley

700HS

KFIT





Read this topic online    here:

http://forums.matronics.com/viewtopic.php?p=331393#331393======================

 e  ties  Day  =======================               - MATRONICS WEB FORUMS  =======================             - List Contribution Web Site  sp;                             =



	


   	  Quote: 	
		  



et="_blank">http://www.matronics.com/Navigator?Yak-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	




	


-- 

Clifford Coy

Border Air Ltd.

629 Airport Rd.

Swanton, VT 05488

802-868-2822 TEL

802-868-4465 FAX

Skype: Cliff.Coy

  [quote][b]

threein60(at)yahoo.com
Guest

Posted: Fri Feb 18, 2011 9:47 am Post subject: cnc cutting for inst panel

I had two different front panels custom cut for my CJ now.  CAD and water jet is the way to go if available to you.  fantastic job and tight tolerances are achieved.



 Larry Pine

--- On Fri, 2/18/11, cjpilot710(at)aol.com <cjpilot710(at)aol.com> wrote:

  	  Quote: 	
		  

From: cjpilot710(at)aol.com <cjpilot710(at)aol.com>

Subject: Re: cnc cutting for inst panel

To: yak-list(at)matronics.com

Date: Friday, February 18, 2011, 6:15 AM



  I did this a number of years ago.  I had drawn up a panel in AutoCad, and a local shop (now out of business) cut the panels that Doug sells.  The programing of the cnc took about 4 hours, the actual cutting took :30 minutes.  Really fascinating to watch!  The fit and finish is perfect.

  

 However I had believe I have that file around anymore.  Although I still do a lot of cad drawing its for fun.

  

 Jim "Pappy" Goolsby

  

  In a message dated 2/17/2011 11:32:49 P.M. Eastern Standard Time, keith.mckinley(at)townisp.com writes:

  	  Quote: 	
		  --> Yak-List message posted by: "keithmckinley" <keith.mckinley(at)townisp.com>



Can anyone recommend a shop that is familiar with our instruments (CJ-6) and would likely have a stock CAD file they could manpulate. I have a blank panel from Doug that I'd like cut.



I know I can cut the holes myself but the CNC machine does a MUCH nicer job!



Keith



--------

Keith McKinley

700HS

KFIT





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=331393#331393=============================              - MATRONICS WEB FORUMS =======================             - List Contribution Web Site sp;                         ==========================



	


 	  Quote: 	
		  



et=_blank rel=nofollow>http://www.matronics.com/Navigator?Yak-List

=nofollow>http://forums.matronics.com

blank rel=nofollow>http://www.matronics.com/contribution



	


	


         [quote][b]

Sonic1

Joined: 10 Feb 2009
Posts: 21
Location: Vancouver, BC

Posted: Fri Feb 18, 2011 3:45 pm Post subject: Re: cnc cutting for inst panel

I designed Adrian Cooper's panel in AutoCAD and had it laser cut. Laser cutter programming took about a half an hour, and the actual laser cutting was about 90 seconds. Page one of the attached pdf is the layout, and page two is fresh out of the laser cutter.



Jeff.

Adrian CJ Panel.pdf

Description:

Download

Filename:

Adrian CJ Panel.pdf

Filesize:

136.75 KB

Downloaded:

473 Time(s)

keithmckinley

Joined: 11 Aug 2008
Posts: 434

Posted: Sat Feb 19, 2011 6:13 pm Post subject: Re: cnc cutting for inst panel

NICE! 



Jeff, what dimensions did you use for the small Chinese instruments as they are a tad bigger than the standard 2.25". It seems the large Chinese stuff is 

right at the standard 3 1/8"



Keith

CJ6XXK

Joined: 27 Jan 2011
Posts: 21
Location: Australia

Posted: Sat Feb 19, 2011 11:35 pm Post subject: Re: cnc cutting for inst panel

Hi



How did you go pressing the sides over? What size material did you use.

If someone can get me a CAD file or dimensions i will draw them up and cut some.

I am also going to do the fuel filler covers as well that i will send to Doug Sapp so he can supply them to all.

Daniel

keithmckinley

Joined: 11 Aug 2008
Posts: 434

Posted: Sun Feb 20, 2011 6:27 am Post subject: Re: cnc cutting for inst panel

Doug Sapp has those blank panels custom made.



Jeff I sent you a PM.



Keith

fish(at)aviation-tech.com
Guest

Posted: Mon Feb 28, 2011 4:51 pm Post subject: cnc cutting for inst panel

Keith,



I am working on building a CNC machine, but it is probably a couple 

of years away from being completed.

It will be delayed about a year, while I am recalled to active duty 

(June or Jul 2011), and saving up for the electronics.

My best estimate so far on cost is $7-$10K.



I initially started researching CNC routers, for a 1:1 scale F-16 

cockpit project.

But the found I could do so much more with it (build parts for my L-5 

& PT-19 restorations).

I had not even thought of building custom instrument panels with it.



Thanks for adding to my list of things to use it for

John Fischer



At 08:30 PM 2/17/2011, you wrote:

 	  Quote: 	
		  



Can anyone recommend a shop that is familiar with our instruments 

(CJ-6) and would likely have a stock CAD file they could manpulate. 

I have a blank panel from Doug that I'd like cut.



I know I can cut the holes myself but the CNC machine does a MUCH nicer job!



Keith



--------

Keith McKinley

700HS

KFIT





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=331393#331393

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum